- HOME
- POLYMER SEARCH
- Thermoplastic
- Acetal (POM)
- Acetal Copolymer, Glass Bead Filled
- Techmer ES HiFill® POM CO GC25 25% Glass Bead Filled
Techmer ES HiFill® POM CO GC25 25% Glass Bead Filled
| Category | Polymer , Thermoplastic , Acetal (POM) , Acetal Copolymer, Glass Bead Filled |
| Manufacturer | Techmer ES |
| Trade Name | HiFill® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Techmer ES HiFill® POM CO GC25 25% Glass Bead Filled.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Bead, 25% Filler by WeightFeatures: CopolymerInformation provided by TP Composites, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.58 g/cc | 0.0571 lb/in³ | ASTM D792 |
| Water Absorption | 0.50 % @Time 86400 sec |
0.50 % @Time 24.0 hour |
ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.014 cm/cm @Thickness 3.17 mm |
0.014 in/in @Thickness 0.125 in |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 84 | 84 | ASTM D785 |
| Tensile Strength, Yield | 51.7 MPa | 7500 psi | ASTM D638 |
| Elongation at Yield | 5.0 % | 5.0 % | ASTM D638 |
| Flexural Yield Strength | 81.4 MPa | 11800 psi | ASTM D790 |
| Flexural Modulus | 3.38 GPa | 490 ksi | ASTM D790 |
| Izod Impact, Notched | 0.374 J/cm @Thickness 3.17 mm |
0.700 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 63.0 µm/m-°C | 35.0 µin/in-°F | ASTM D696 |
| Melting Point | 162 °C | 324 °F | |
| Deflection Temperature at 0.46 MPa (66 psi) | 141 °C | 285 °F | Unannealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 116 °C | 240 °F | Unannealed; ASTM D648 |
| Flammability, UL94 | HB | HB |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D257 |
| Dielectric Strength | 17.7 kV/mm | 450 kV/in | Method A (Short-Time); ASTM D149 |
Users viewing this material also viewed the following:
- LyondellBasell Lupolen® 3020 H LDPE, Film Grade
- Kennametal Stellite Denertiaâ„¢ C13 Cobalt Chromium Dental Alloy
- Ipiranga Petrochem PRB 4215 Polypropylene
- Kolon KOPA® KN132G30VO G/F Reinforced Flame Retardant Nylon 6
- Spartech PolyTeak Low Stress HDPE Specialty Sheet
- Master Bond EP36CLV One Component Heat Resistant Liquid Flexible Epoxy
- Total PPH 12020 Polypropylene Homopolymer, Injection Molding
- E-Polymers EFLEX® S1070 General
- Aaron Industries AAROPRENE® TFPP 2010 Talc Filled Polypropylene
Copyright © lookpolymers.com All Rights Reserved