Polymer Property : Izod Impact, Notched = 0.374 J/cm Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Izod Impact, Notched	0.374 J/cm @Temperature 23.0 °C	0.700 ft-lb/in @Temperature 73.4 °F	ASTM D256
RheTech Products G10UP100-01 10% Glass Fiber Reinforced Polypropylene, Black, UL94-HB Rated Applications: Consumer housingsConsumer goodsFunctional supportsInjection molding conditions reported in table.Information provided by RheTech Products.
Izod Impact, Notched	0.374 J/cm @Temperature -40.0 °C	0.700 ft-lb/in @Temperature -40.0 °F	ASTM D256
Penn Fibre Pennite® 4512 Nylon 6, 12% Glass Fiber Reinforced (PA6) PENNITE® 4512 is a 12% glass fiber reinforced, black pigmented, thermally modified, type 6 nylon, available in sheets and rolls for high performance thermoforming and fabrication applications. PENN..
Izod Impact, Notched	0.374 - 0.587 J/cm	0.700 - 1.10 ft-lb/in	Average value: 0.486 J/cm Grade Count:9
Overview of materials for Polyphenylene Sulfide (PPS) with 10% Glass Fiber Filler This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Sulfide (PPS) with 10% Glass Fiber Filler". Specific grades with glass content between 5% ..
Izod Impact, Notched	0.374 - 6.51 J/cm	0.700 - 12.2 ft-lb/in	Average value: 1.65 J/cm Grade Count:92
Overview of materials for Nylon 66, Glass Reinforced, Impact Grade This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, Glass Reinforced, Impact Grade". Each property range of values reported is minimum and maximum..
Izod Impact, Notched	0.374 - 1.07 J/cm	0.700 - 2.00 ft-lb/in	Average value: 0.807 J/cm Grade Count:10
Overview of materials for Nylon 66, Mineral Filled, Impact Grade This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, Mineral Filled, Impact Grade". Each property range of values reported is minimum and maximum v..
Izod Impact, Notched	0.374 J/cm @Thickness 3.17 mm	0.700 ft-lb/in @Thickness 0.125 in	ASTM D256
Techmer ES HiFillÂ® PA6/6 0177 Nylon 66 Availability: North AmericaForms: PelletsFiller/Reinforcement: Unspecified Filler/ReinforFeatures: High Specific GravityProcessing Method: Injection MoldingInformation provided by TP Composites, Inc..
Izod Impact, Notched	0.374 J/cm @Thickness 3.17 mm	0.700 ft-lb/in @Thickness 0.125 in	ASTM D256
Techmer ES LuriblendÂ® PA6/6 TL20 Nylon 66 Availability: North AmericaForms: PelletsAdditive: PTFE Lubricant(20%)Features: Lubricated, Low Friction and Good Wear ResistanceUL File Number: E157318TPCI# 9740101Information provided by TP Compos..
Izod Impact, Notched	0.374 J/cm @Thickness 3.17 mm	0.700 ft-lb/in @Thickness 0.125 in	ASTM D256
PlastxWorld CEVIAN® B6524 20% GF PBT/ABS Alloy Glass fiber and mineral filled, low warpage and flame retarded PBT/ABS.Information provided by PlastxWorld Inc.
Izod Impact, Notched	0.374 J/cm @Thickness 3.17 mm	0.700 ft-lb/in @Thickness 0.125 in	ASTM D256
PlastxWorld CEVIAN®-N GRSJ1 10% GF SAN resin Glass fiber reinforced SAN resin. These are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by PlastxWorld Inc.
Izod Impact, Notched	0.374 J/cm	0.700 ft-lb/in	0.125 in; ASTM D256
Chase Plastics CP Pryme® NN300HL (Dry) Nylon 66, Heat Stabilized, Lubricated Features: General purposeHeat stabilizedLubricatedForm: PelletsInformation provided by Chase Plastics.
Izod Impact, Notched	0.374 J/cm	0.700 ft-lb/in	ASTM D256
Westlake Plastics Propylux® Polypropylene Propylux is made from polypropylene resin. Among its most notable characteristics are its mechanical toughness, chemical resistance and resistance it abrasion. These properties makes it suitable f..
Izod Impact, Notched	0.374 J/cm	0.700 ft-lb/in	ASTM D256
A. Schulman SCHULAMID® 66 MF40 Mineral Filled Nylon 66 Information provided by A. Schulman.
Izod Impact, Notched	0.374 J/cm @Temperature 23.0 °C	0.700 ft-lb/in @Temperature 73.4 °F	ASTM D256
Formosa Plastics Formolene® 4143T Homopolymer Polypropylene Homopolymer for Injection Molded Applications Formolene® 4143T is a highly isotactic polypropylene for use in injection molded applications including cutlery and thin wall components. It contains a..
Izod Impact, Notched	0.374 J/cm	0.700 ft-lb/in
Cyclewood Solutions Xylomer™ XM2-FPC Sustainable Injection Molding Resin 100% biodegradable and compostable thermoplastic. The sustainable bio-based resin properties perform between polypropylene and polystyrene. Xylomer™ is modified lignin, an abundant, natural bypro..
Izod Impact, Notched	0.374 J/cm	0.700 ft-lb/in	ASTM D256A
Braskem FT200WV Homopolymer Polypropylene Description: Good mold release, nucleated, excellent rigidity and hardness.Applications: Suggested uses include housewares, caps and closures, fast-cycle injection molding.Process: Injection Molding..
Izod Impact, Notched	0.374 J/cm	0.700 ft-lb/in	ASTM D256
Aaron Industries AAROPRENE® TFPP 2010 Talc Filled Polypropylene AAROPRENE® TFPP 2000 Series Talc Reinforced CompoundsMelt flow index may be specified. Color may be specified.
Izod Impact, Notched	0.374 J/cm	0.700 ft-lb/in	Type "A"; ASTM D256
Quadrant EPP Duratron® PAI T7530, Compression Molded Carbon Fiber Reinforced Polyamide-Imide
Izod Impact, Notched	0.374 J/cm @Temperature 23.0 °C	0.700 ft-lb/in @Temperature 73.4 °F	ASTM D256
RheTech Products HP501-01 High Performance Polypropylene Copolymer, Non-UV Stabilized, Black Applications: Battery traysInterior TrimInjection molding conditions reported in table.Information provided by RheTech Products.
Izod Impact, Notched	0.374 J/cm	0.700 ft-lb/in	ASTM D256A
Braskem D036W6 Homopolymer Polypropylene Description: Injection Molding, General Purpose, Low Water CarryoverApplications: Suggested Uses Include Tape, Slit-film Fibers, Containers, Closures, HousewaresThis resin meets the requirements for..