Styrolution TerluranÂ® HI-10 ABS

Category	Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Impact Grade, Molded
Manufacturer	Styrolution
Trade Name	Terluran®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styrolution TerluranÂ® HI-10 ABS.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Terluran HI-10 is an injection molding and extrusion grade of ABS with very high toughness and medium flow.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS.

Physical Properties	Metric	English	Comments
Density	1.03 g/cc	0.0372 lb/inÂ³	ISO 1183
Water Absorption	1.03 %	1.03 %	ISO 62
Moisture Absorption at Equilibrium	0.21 %	0.21 %	23Â°C/50% R.H.; ISO 62
Linear Mold Shrinkage	0.0055 cm/cm	0.0055 in/in	ASTM Data; MD
Melt Flow	0.10 g/10 min @Load 5.00 kg, Temperature 200 Â°C	0.10 g/10 min @Load 11.0 lb, Temperature 392 Â°F	ASTM Test
	1.7 g/10 min @Load 3.80 kg, Temperature 230 Â°C	1.7 g/10 min @Load 8.38 lb, Temperature 446 Â°F	ASTM Test
	8.0 g/10 min @Load 10.0 kg, Temperature 220 Â°C	8.0 g/10 min @Load 22.0 lb, Temperature 428 Â°F	ISO 1133
	8.0 g/10 min @Load 10.0 kg, Temperature 220 Â°C	8.0 g/10 min @Load 22.0 lb, Temperature 428 Â°F	ASTM Test

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	95	95	ASTM Test
Tensile Strength, Yield	38.0 MPa	5510 psi	50mm/min; ISO 527
	43.0 MPa	6240 psi	2 in/min; ASTM Test
Elongation at Break	9.0 %	9.0 %	50mm/min, Nominal strain; ISO 527
Elongation at Yield	2.8 %	2.8 %	50mm/min; ISO 527
	3.5 %	3.5 %	2 in/min; ASTM Test
Tensile Modulus	1.90 GPa	276 ksi	1mm/min; ISO 527
	2.00 GPa	290 ksi	ASTM Test
Flexural Strength	56.0 MPa	8120 psi	ISO Data
	66.0 MPa	9570 psi	ASTM Test
Flexural Modulus	2.05 GPa	297 ksi	ASTM Test
Izod Impact, Notched	1.20 J/cm @Temperature -30.0 Â°C	2.25 ft-lb/in @Temperature -22.0 Â°F	ASTM Test
	1.80 J/cm @Temperature -18.0 Â°C	3.37 ft-lb/in @Temperature -0.400 Â°F	ASTM Test
	4.50 J/cm @Thickness 3.17 mm	8.43 ft-lb/in @Thickness 0.125 in	ASTM Test
Izod Impact, Notched (ISO)	36.0 kJ/mÂ²	17.1 ft-lb/inÂ²	ISO Test
Charpy Impact Unnotched	NB	NB	ISO 179
	14.0 J/cmÂ² @Temperature -30.0 Â°C	66.6 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179
Charpy Impact, Notched	3.50 J/cmÂ²	16.7 ft-lb/inÂ²	ISO 179
	1.30 J/cmÂ² @Temperature -30.0 Â°C	6.19 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	95.0 Âµm/m-Â°C	52.8 Âµin/in-Â°F	ISO 11359
Deflection Temperature at 0.46 MPa (66 psi)	94.0 Â°C	201 Â°F	ASTM Test
	101 Â°C	214 Â°F	ISO 75
	102 Â°C	216 Â°F	annealed; ASTM Test
Deflection Temperature at 1.8 MPa (264 psi)	86.0 Â°C	187 Â°F	ASTM Test
	96.0 Â°C	205 Â°F	ISO 75
	98.0 Â°C	208 Â°F	annealed; ASTM Test
Vicat Softening Point	94.0 Â°C	201 Â°F	Rate "A" Loading 2 (50 degC/h 50N); ASTM Test
	94.0 Â°C	201 Â°F	(50 Â°C/h / 50N) - B/50; ISO 306
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in
	HB @Thickness 0.800 mm	HB @Thickness 0.0315 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm	IEC 60093
Dielectric Constant	2.8 @Frequency 1.00e+6 Hz	2.8 @Frequency 1.00e+6 Hz	IEC 60250
	2.9 @Frequency 100 Hz	2.9 @Frequency 100 Hz	IEC 60250
Dielectric Strength	40.0 kV/mm	1020 kV/in	IEC 60243-1
Dissipation Factor	0.0054 @Frequency 100 Hz	0.0054 @Frequency 100 Hz	IEC 60250
	0.0082 @Frequency 1.00e+6 Hz	0.0082 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	250 Â°C	482 Â°F	Injection molding
Mold Temperature	102 Â°C	216 Â°F	Ejection temperature
Injection Velocity	60.0 mm/sec	2.36 in/sec	Injection molding

Descriptive Properties	Value	Comments
Color	Natural
Commercial Status	North America and Europe
FDA	Yes
Form	Pellets
Impact Modified	Yes
NSF Std. 51	Yes
NSF Std. 61	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding
	Other Extrusion
	Profile Extrusion
	Sheet Extrusion
UL.UL-C	Yes
USP Class VI	No

Users viewing this material also viewed the following: