Solvay Specialty Polymers Amodel® AS-1145 HS Polyphthalamide (PPA) (Unverified Data**)

Category	Polymer , Thermoplastic , Polyphthalamide (PPA)
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers Amodel® AS-1145 HS Polyphthalamide (PPA) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Amodel AS-1145 HS is a 45% glass reinforced heat stabilized polyphthalamide (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses greater than 0.125 inch (3 mm). Key properties of this structural resin are high heat deflection temperature, high flexural modulus, high tensile strength, excellent creep resistance, and low moisture absorption. - Black: AS-1145 HS BK 324 - Natural: AS-1145 HS NTData is presented for dry polymer unless noted as 'conditioned'.Information provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Density	1.56 g/cc	0.0564 lb/in³	ISO 1183/A
Filler Content	45 %	45 %	Glass Fiber Reinforcement
Water Absorption	0.12 % @Time 86400 sec	0.12 % @Time 24.0 hour	ASTM D570
Linear Mold Shrinkage, Flow	0.0010 cm/cm	0.0010 in/in	Conditioned; ASTM D955
	0.0020 cm/cm	0.0020 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.0010 cm/cm	0.0010 in/in	Conditioned; ASTM D955
	0.0060 cm/cm	0.0060 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	125	125	R-Scale; ASTM D785
Tensile Strength at Break	228 MPa	33100 psi	Conditioned; ASTM D638
	259 MPa	37600 psi	ASTM D638
	263 MPa	38100 psi	ISO 527-2
Elongation at Break	2.1 %	2.1 %	Conditioned; ASTM D638
	2.6 %	2.6 %	ASTM D638
	2.7 %	2.7 %	ISO 527-2
Tensile Modulus	16.0 GPa	2320 ksi	ISO 527-2
	17.2 GPa	2490 ksi	Conditioned; ASTM D638
	17.2 GPa	2490 ksi	ASTM D638
Flexural Strength	376 MPa	54500 psi	ISO 178
Flexural Yield Strength	294 MPa	42600 psi	Conditioned; ASTM D790
	363 MPa	52600 psi	ASTM D790
Flexural Modulus	13.8 GPa	2000 ksi	ASTM D790
	13.8 GPa	2000 ksi	Conditioned; ASTM D790
	14.8 GPa	2150 ksi	ISO 178
Compressive Strength	302 MPa	43800 psi	Conditioned; ASTM D695
	314 MPa	45500 psi	ASTM D695
Poissons Ratio	0.41	0.41	ASTM E132
Shear Modulus	5.67 - 6.10 GPa	822 - 885 ksi	Calculated
Shear Strength	91.7 MPa	13300 psi	Conditioned; ASTM D732
	108 MPa	15700 psi	ASTM D732
Izod Impact, Notched	1.00 J/cm	1.87 ft-lb/in	Conditioned; ASTM D256
	1.20 J/cm	2.25 ft-lb/in	ASTM D256
	13.0 J/cm	24.4 ft-lb/in	ASTM D256
Izod Impact, Notched (ISO)	14.0 kJ/m²	6.66 ft-lb/in²	ISO 180/1A
Charpy Impact, Notched	1.20 J/cm²	5.71 ft-lb/in²	ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	11.0 µm/m-°C @Temperature 160 - 249 °C	6.11 µin/in-°F @Temperature 320 - 480 °F	TMA; ASTM E831
	14.0 µm/m-°C @Temperature 0.000 - 100 °C	7.78 µin/in-°F @Temperature 32.0 - 212 °F	TMA; ASTM E831
CTE, linear, Transverse to Flow	50.0 µm/m-°C @Temperature 0.000 - 100 °C	27.8 µin/in-°F @Temperature 32.0 - 212 °F	ASTM E831
	100 µm/m-°C @Temperature 160 - 249 °C	55.6 µin/in-°F @Temperature 320 - 480 °F	ASTM E831
Melting Point	312 °C	594 °F	Peak; ASTM D3418
	312 °C	594 °F	ISO 11357-3
Maximum Service Temperature, Air	165 °C @Time 7.20e+7 sec	329 °F @Time 20000 hour	Continuous; ASTM D3045
	185 °C @Time 1.80e+7 sec	365 °F @Time 5000 hour	Continuous; ASTM D3045
Deflection Temperature at 0.46 MPa (66 psi)	301 °C @Thickness 3.18 mm	574 °F @Thickness 0.125 in	Annealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	279 °C	534 °F	Unannealed; ISO 75-2/A
	287 °C @Thickness 3.18 mm	549 °F @Thickness 0.125 in	Annealed; ASTM D648
Flammability, UL94	HB @Thickness 3.18 mm	HB @Thickness 0.125 in	UL 94

Electrical Properties	Metric	English	Comments
Volume Resistivity	2.00e+15 ohm-cm	2.00e+15 ohm-cm	Conditioned; ASTM D257
	1.00e+16 ohm-cm	1.00e+16 ohm-cm	ASTM D257
Dielectric Constant	4.4 @Frequency 1.00e+6 Hz	4.4 @Frequency 1.00e+6 Hz	ASTM D150
	4.5 @Frequency 1.00e+6 Hz	4.5 @Frequency 1.00e+6 Hz	Conditioned; ASTM D150
	4.6 @Frequency 60.0 Hz	4.6 @Frequency 60.0 Hz	ASTM D150
	4.9 @Frequency 60.0 Hz	4.9 @Frequency 60.0 Hz	Conditioned; ASTM D150
Dielectric Strength	22.0 kV/mm	559 kV/in	Conditioned; ASTM D149
	22.0 kV/mm	559 kV/in	ASTM D149
Dissipation Factor	0.0050 @Frequency 60.0 Hz	0.0050 @Frequency 60.0 Hz	ASTM D150
	0.0090 @Frequency 60.0 Hz	0.0090 @Frequency 60.0 Hz	Conditioned; ASTM D150
	0.016 @Frequency 1.00e+6 Hz	0.016 @Frequency 1.00e+6 Hz	ASTM D150
	0.021 @Frequency 1.00e+6 Hz	0.021 @Frequency 1.00e+6 Hz	Conditioned; ASTM D150
Arc Resistance	125 sec	125 sec	Conditioned; ASTM D495
	145 sec	145 sec	ASTM D495
Comparative Tracking Index	550 V	550 V	UL 746
	550 V	550 V	Conditioned; UL 746

Processing Properties	Metric	English	Comments
Feed Temperature	79.4 °C	175 °F	Hopper Temperature
Rear Barrel Temperature	304 - 318 °C	579 - 604 °F
Front Barrel Temperature	316 - 329 °C	601 - 624 °F
Melt Temperature	321 - 343 °C	610 - 649 °F
Mold Temperature	135 °C	275 °F
Drying Temperature	121 °C	250 °F
Dry Time	4.00 hour	4.00 hour
Moisture Content	0.10 %	0.10 %

Descriptive Properties	Value	Comments
Additive	Heat Stabilizer
Appearance	Black
	Natural Color
Automotive Specifications	ASTM D4000 PA121 G45 Color: BK324 Black
	ASTM D4000 PA121 G45 Color: NT Natural
	ASTM D5336 PPA0120 G45 A06637 Color: BK324 Black
	ASTM D6779 PA121G45
	BOSCH N28 BN05-OX1 BN0510-GF45-3Anf10SO Color: NT Natural
	BOSCH N28 BN05-OX1 BN0510-GF45-3Asw01SO Color: BK324 Black
	DELPHI DCM4889 Color: BK324 Black
	DELPHI DCM4889 Color: NT Natural
	DELPHI M-6073 Color: BK324 Black
	FORD WSK-M4D861-A2 Color: BK324 Black

Users viewing this material also viewed the following: