Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Samyang Trirex® PC-3025N2 10 MFI Flame Retardant Clear Polycarbonate

Category Polymer , Thermoplastic , Polycarbonate (PC) , Polycarbonate, Unreinforced, Flame Retardant
Manufacturer Samyang
Trade Name Trirex®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Samyang Trirex® PC-3025N2 10 MFI Flame Retardant Clear Polycarbonate.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Information provided by US distributor Polymer Technology and Services, LLC (PTS).
Physical Properties Metric English Comments
Density 1.20 g/cc
0.0434 lb/in³
ASTM D792
Water Absorption 0.15 %
0.15 %
24 hours at 73°F
Linear Mold Shrinkage 0.0050 - 0.0070 cm/cm
0.0050 - 0.0070 in/in
ASTM D955
Melt Flow 10 g/10 min

@Load 1.20 kg,
Temperature 300 °C
 10 g/10 min

@Load 2.65 lb,
Temperature 572 °F
Mechanical Properties Metric English Comments
Hardness, Rockwell R 120
120
ASTM D785
Tensile Strength, Yield 63.5 MPa

@Thickness 3.17 mm
 9210 psi

@Thickness 0.125 in
Elongation at Break 100 %

@Thickness 3.17 mm
 100 %

@Thickness 0.125 in
Flexural Yield Strength 84.0 MPa

@Thickness 3.17 mm
 12200 psi

@Thickness 0.125 in
Flexural Modulus 3.10 GPa

@Thickness 3.17 mm
 450 ksi

@Thickness 0.125 in
Izod Impact, Notched 5.87 J/cm

@Thickness 3.17 mm
 11.0 ft-lb/in

@Thickness 0.125 in
Thermal Properties Metric English Comments
Deflection Temperature at 1.8 MPa (264 psi) 132 °C
270 °F
ASTM D648
Flammability, UL94 V-0

@Thickness 3.17 mm
 V-0

@Thickness 0.125 in
Optical Properties Metric English Comments
Transmission, Visible >= 86 %

@Thickness 3.00 mm
 >= 86 %

@Thickness 0.118 in
 ASTM D1003
Electrical Properties Metric English Comments
Volume Resistivity 4.00e+16 ohm-cm
4.00e+16 ohm-cm
ASTM D257
Dielectric Constant 2.8
2.8
ASTM D150
Dielectric Strength 30.0 kV/mm

@Thickness 3.00 mm
 762 kV/in

@Thickness 0.118 in
 ASTM D149
Dissipation Factor 0.0082
0.0082
ASTM D150
Arc Resistance 120 sec

@Thickness 3.00 mm
 120 sec

@Thickness 0.118 in
 High Voltage, Low Current; ASTM D495
Processing Properties Metric English Comments
Rear Barrel Temperature 266 - 282 °C
510 - 540 °F
Middle Barrel Temperature 271 - 288 °C
520 - 550 °F
Front Barrel Temperature 282 - 304 °C
540 - 580 °F
Nozzle Temperature 277 - 310 °C
530 - 590 °F
Melt Temperature 288 - 316 °C
550 - 600 °F
Mold Temperature 71.1 - 110 °C
160 - 230 °F
Drying Temperature 121 °C
250 °F
Dry Time 3 - 4 hour
3 - 4 hour
Injection Pressure 82.7 - 124 MPa
12000 - 18000 psi
Back Pressure 0.345 - 1.38 MPa
50.0 - 200 psi
Clamp Pressure 27.6 - 68.9 MPa
4000 - 10000 psi
Cycle Time - Injection 1.0 - 2.5 sec
1.0 - 2.5 sec
Cycle Time - Cooling 5.0 - 40 sec
5.0 - 40 sec
Vent Depth 0.00200 - 0.00800 cm
0.000787 - 0.00315 in
Screw Speed 40 - 70 rpm
40 - 70 rpm
Descriptive Properties Value Comments
Injection Speed- Edge Gate Slow-Medium
Injection Speed- Tab Gate Medium-Fast
Injection Speed- Tunnel Gate Fast
Shot Size 40-60%
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved