Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

SABIC Innovative Plastics Xylex X7200MR PC+POLYESTER (Asia Pacific)

Category Polymer , Thermoplastic , Polycarbonate (PC) , Polycarbonate/PET Polyester Blend , Polyester, TP , Polyethylene Terephthalate (PET)
Manufacturer SABIC Innovative Plastics (GE Plastics)
Trade Name Xylex
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF SABIC Innovative Plastics Xylex X7200MR PC+POLYESTER (Asia Pacific).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Mold Release version of X7200This data was supplied by SABIC-IP for the Asia Pacific region.
Physical Properties Metric English Comments
Specific Gravity 1.20 g/cc
1.20 g/cc
ASTM D 792
Density 1.18 g/cc
0.0426 lb/in³
ISO 1183
Linear Mold Shrinkage, Flow 0.0050 - 0.0070 cm/cm

@Thickness 3.20 mm
0.0050 - 0.0070 in/in

@Thickness 0.126 in
SABIC Method
Linear Mold Shrinkage, Transverse 0.0050 - 0.0070 cm/cm

@Thickness 3.20 mm
0.0050 - 0.0070 in/in

@Thickness 0.126 in
SABIC Method
Melt Flow 12 g/10 min

@Load 2.16 kg,
Temperature 265 °C
12 g/10 min

@Load 4.76 lb,
Temperature 509 °F
ASTM D 1238
12 g/10 min

@Load 2.16 kg,
Temperature 265 °C
12 g/10 min

@Load 4.76 lb,
Temperature 509 °F
[cm^3/10 min] Melt Volume Rate; ISO 1133
Mechanical Properties Metric English Comments
Hardness, Shore D 75
75
10S reading; ASTM D 2240
Tensile Strength at Break 56.0 MPa
8120 psi
Type I, 50 mm/min; ASTM D 638
56.0 MPa
8120 psi
50 mm/min; ISO 527
Tensile Strength, Yield 55.0 MPa
7980 psi
Type I, 50 mm/min; ASTM D 638
55.0 MPa
7980 psi
50 mm/min; ISO 527
Elongation at Break 135 %
135 %
Type I, 50 mm/min; ASTM D 638
>= 150 %
>= 150 %
50 mm/min; ISO 527
Elongation at Yield 5.0 %
5.0 %
Type I, 50 mm/min; ASTM D 638
5.0 %
5.0 %
5 mm/min; ISO 527
Tensile Modulus 1.88 GPa
273 ksi
50 mm/min; ASTM D 638
2.00 GPa
290 ksi
1 mm/min; ISO 527
Flexural Strength 75.0 MPa
10900 psi
2 mm/min; ISO 178
Flexural Yield Strength 84.0 MPa
12200 psi
1.3 mm/min, 50 mm span; ASTM D 790
Flexural Modulus 1.96 GPa
284 ksi
1.3 mm/min, 50 mm span; ASTM D 790
2.00 GPa
290 ksi
2 mm/min; ISO 178
Izod Impact, Notched 9.00 J/cm

@Temperature 23.0 °C
16.9 ft-lb/in

@Temperature 73.4 °F
ASTM D 256
Izod Impact, Notched (ISO) 5.00 kJ/m²

@Temperature -10.0 °C
2.38 ft-lb/in²

@Temperature 14.0 °F
80*10*4; ISO 180/1A
8.00 kJ/m²

@Temperature 23.0 °C
3.81 ft-lb/in²

@Temperature 73.4 °F
80*10*4; ISO 180/1A
Impact Test 95.0 J

@Temperature 23.0 °C
70.1 ft-lb

@Temperature 73.4 °F
Instrumented Impact Total Energy; ASTM D 3763
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 80.0 µm/m-°C

@Temperature 23.0 - 60.0 °C
44.4 µin/in-°F

@Temperature 73.4 - 140 °F
ISO 11359-2
105 µm/m-°C

@Temperature -40.0 - 40.0 °C
58.3 µin/in-°F

@Temperature -40.0 - 104 °F
ASTM E 831
CTE, linear, Transverse to Flow 80.0 µm/m-°C

@Temperature 23.0 - 60.0 °C
44.4 µin/in-°F

@Temperature 73.4 - 140 °F
ISO 11359-2
105 µm/m-°C

@Temperature -40.0 - 40.0 °C
58.3 µin/in-°F

@Temperature -40.0 - 104 °F
ASTM E 831
Thermal Conductivity 0.230 W/m-K
1.60 BTU-in/hr-ft²-°F
ISO 8302
Hot Ball Pressure Test <= 105 °C
<= 221 °F
IEC 60695-10-2
Deflection Temperature at 0.46 MPa (66 psi) 96.0 °C

@Thickness 3.20 mm
205 °F

@Thickness 0.126 in
unannealed; ASTM D 648
Deflection Temperature at 1.8 MPa (264 psi) 99.0 °C
210 °F
Edgew 120*10*4 sp=100mm; ISO 75/Ae
90.0 °C

@Thickness 3.20 mm
194 °F

@Thickness 0.126 in
unannealed; ASTM D 648
Vicat Softening Point 115 °C
239 °F
Rate B/50; ASTM D 1525
115 °C
239 °F
Rate B/120; ISO 306
Flammability, UL94 V-2

@Thickness 3.00 mm
V-2

@Thickness 0.118 in
UL 94
Glow Wire Test 750 °C

@Thickness 1.00 mm
1380 °F

@Thickness 0.0394 in
Glow Wire Flammability Index; IEC 60695-2-12
Optical Properties Metric English Comments
Refractive Index 1.557
1.557
ISO 489
Haze 1.1 %

@Thickness 2.54 mm
1.1 %

@Thickness 0.100 in
ASTM D 1003
Transmission, Visible 88 %

@Thickness 2.54 mm
88 %

@Thickness 0.100 in
ASTM D 1003
Electrical Properties Metric English Comments
Volume Resistivity >= 1.00e+15 ohm-cm
>= 1.00e+15 ohm-cm
ASTM D 257
Surface Resistance >= 1.00e+15 ohm
>= 1.00e+15 ohm
ASTM D 257
Copyright © lookpolymers.com All Rights Reserved