Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

SABIC Innovative Plastics Xenoy® CL402 PBT+PC (Europe-Africa-Middle East)

Category Polymer , Thermoplastic , Polycarbonate (PC) , Polycarbonate/Polybutylene Terephthalate (PBT) Blend, Unreinforced , Polyester, TP , Polybutylene Terephthalate (PBT)
Manufacturer SABIC Innovative Plastics (GE Plastics)
Trade Name Xenoy®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF SABIC Innovative Plastics Xenoy® CL402 PBT+PC (Europe-Africa-Middle East).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
XENOY CL402 is a high viscosity, unfilled, elastomer modified PC/PBT blend for extrusion/blowmolding applications. ISO1043-label: PC+PBT-I.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Physical Properties Metric English Comments
Specific Gravity 1.20 g/cc
1.20 g/cc
ASTM D 792
Density 1.20 g/cc
0.0434 lb/in³
ISO 1183
Moisture Absorption at Equilibrium 0.15 %
0.15 %
23°C / 50% RH; ISO 62
Water Absorption at Saturation 0.50 %

@Temperature 23.0 °C
 0.50 %

@Temperature 73.4 °F
 ISO 62
Linear Mold Shrinkage, Flow 0.0090 - 0.012 cm/cm
0.0090 - 0.012 in/in
on tensile bar; SABIC Method
0.0090 - 0.012 cm/cm

@Thickness 3.20 mm
 0.0090 - 0.012 in/in

@Thickness 0.126 in
 SABIC Method
Melt Flow 6.0 g/10 min

@Load 5.00 kg,
Temperature 250 °C
 6.0 g/10 min

@Load 11.0 lb,
Temperature 482 °F
 [cm^3/10 min] Melt Volume Rate; ISO 1133
6.0 g/10 min

@Load 5.00 kg,
Temperature 250 °C
 6.0 g/10 min

@Load 11.0 lb,
Temperature 482 °F
 ASTM D 1238
7.0 g/10 min

@Load 5.00 kg,
Temperature 250 °C
 7.0 g/10 min

@Load 11.0 lb,
Temperature 482 °F
 ISO 1133
Mechanical Properties Metric English Comments
Hardness, H358/30 85.0 MPa
12300 psi
ISO 2039-1
Tensile Strength at Break 41.0 MPa
5950 psi
Type I, 50 mm/min; ASTM D 638
41.0 MPa
5950 psi
50 mm/min; ISO 527
Tensile Strength, Yield 45.0 MPa
6530 psi
Type I, 50 mm/min; ASTM D 638
45.0 MPa
6530 psi
50 mm/min; ISO 527
Elongation at Break 50 %
50 %
Type I, 50 mm/min; ASTM D 638
50 %
50 %
50 mm/min; ISO 527
Elongation at Yield 4.5 %
4.5 %
Type I, 50 mm/min; ASTM D 638
4.5 %
4.5 %
50 mm/min; ISO 527
Tensile Modulus 1.90 GPa
276 ksi
50 mm/min; ASTM D 638
1.90 GPa
276 ksi
1 mm/min; ISO 527
Flexural Yield Strength 65.0 MPa
9430 psi
2 mm/min; ISO 178
70.0 MPa
10200 psi
1.3 mm/min, 50 mm span; ASTM D 790
Flexural Modulus 1.95 GPa
283 ksi
1.3 mm/min, 50 mm span; ASTM D 790
1.95 GPa
283 ksi
2 mm/min; ISO 178
Izod Impact, Notched 3.50 J/cm

@Temperature -30.0 °C
 6.56 ft-lb/in

@Temperature -22.0 °F
 ASTM D 256
4.75 J/cm

@Temperature 0.000 °C
 8.90 ft-lb/in

@Temperature 32.0 °F
 ASTM D 256
5.75 J/cm

@Temperature 23.0 °C
 10.8 ft-lb/in

@Temperature 73.4 °F
 ASTM D 256
Izod Impact, Notched (ISO) 30.0 kJ/m²

@Temperature -30.0 °C
 14.3 ft-lb/in²

@Temperature -22.0 °F
 80*10*4; ISO 180/1A
39.0 kJ/m²

@Temperature -40.0 °C
 18.6 ft-lb/in²

@Temperature -40.0 °F
 80*10*4; ISO 180/1A
47.0 kJ/m²

@Temperature -20.0 °C
 22.4 ft-lb/in²

@Temperature -4.00 °F
 80*10*4; ISO 180/1A
50.0 kJ/m²

@Temperature 23.0 °C
 23.8 ft-lb/in²

@Temperature 73.4 °F
 80*10*4; ISO 180/1A
Izod Impact, Unnotched (ISO) NB

@Temperature 23.0 °C
 NB

@Temperature 73.4 °F
 80*10*4; ISO 180/1U
NB

@Temperature -30.0 °C
 NB

@Temperature -22.0 °F
 80*10*4; ISO 180/1U
Charpy Impact Unnotched NB

@Temperature 23.0 °C
 NB

@Temperature 73.4 °F
 Edgew 80*10*4 sp=62mm; ISO 179/1eU
NB

@Temperature -30.0 °C
 NB

@Temperature -22.0 °F
 Edgew 80*10*4 sp=62mm; ISO 179/1eU
Charpy Impact, Notched 2.50 J/cm²

@Temperature -30.0 °C
 11.9 ft-lb/in²

@Temperature -22.0 °F
 V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA
5.00 J/cm²

@Temperature 23.0 °C
 23.8 ft-lb/in²

@Temperature 73.4 °F
 V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA
5.00 J/cm²

@Temperature 23.0 °C
 23.8 ft-lb/in²

@Temperature 73.4 °F
 ISO 179/2C
Impact Test 50.0 J

@Temperature 23.0 °C
 36.9 ft-lb

@Temperature 73.4 °F
 Instrumented Impact Total Energy; ASTM D 3763
Taber Abrasion, mg/1000 Cycles 40

@Load 1.00 kg
 40

@Load 2.20 lb
 CS-17; SABIC Method
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 105 µm/m-°C

@Temperature -40.0 - 40.0 °C
 58.3 µin/in-°F

@Temperature -40.0 - 104 °F
 ASTM E 831
110 µm/m-°C

@Temperature 23.0 - 80.0 °C
 61.1 µin/in-°F

@Temperature 73.4 - 176 °F
 ISO 11359-2
CTE, linear, Transverse to Flow 105 µm/m-°C

@Temperature -40.0 - 40.0 °C
 58.3 µin/in-°F

@Temperature -40.0 - 104 °F
 ASTM E 831
110 µm/m-°C

@Temperature 23.0 - 80.0 °C
 61.1 µin/in-°F

@Temperature 73.4 - 176 °F
 ISO 11359-2
Thermal Conductivity 0.190 W/m-K
1.32 BTU-in/hr-ft²-°F
ISO 8302
Deflection Temperature at 0.46 MPa (66 psi) 105 °C
221 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
Deflection Temperature at 1.8 MPa (264 psi) 85.0 °C
185 °F
Edgew 120*10*4 sp=100mm; ISO 75/Ae
85.0 °C

@Thickness 3.20 mm
 185 °F

@Thickness 0.126 in
 unannealed; ASTM D 648
Vicat Softening Point 123 °C
253 °F
Rate B/50; ASTM D 1525
123 °C
253 °F
Rate B/50; ISO 306
125 °C
257 °F
Rate B/120; ISO 306
155 °C
311 °F
Rate A/50; ISO 306
Flammability, UL94 HB

@Thickness 1.50 mm
 HB

@Thickness 0.0591 in
 UL 94 by SABIC-IP
Electrical Properties Metric English Comments
Volume Resistivity >= 1.00e+14 ohm-cm
>= 1.00e+14 ohm-cm
IEC 60093
Surface Resistance >= 1.00e+15 ohm
>= 1.00e+15 ohm
ROA; IEC 60093
Dielectric Constant 3.3

@Frequency 1.00e+6 Hz
 3.3

@Frequency 1.00e+6 Hz
 IEC 60250
3.3

@Frequency 50.0 - 60.0 Hz
 3.3

@Frequency 50.0 - 60.0 Hz
 IEC 60250
Dielectric Strength 17.0 kV/mm

@Thickness 3.20 mm
 432 kV/in

@Thickness 0.126 in
 in oil; IEC 60243-1
18.0 kV/mm

@Thickness 1.60 mm
 457 kV/in

@Thickness 0.0630 in
 in oil; IEC 60243-1
Dissipation Factor 0.0020

@Frequency 50.0 - 60.0 Hz
 0.0020

@Frequency 50.0 - 60.0 Hz
 IEC 60250
0.020

@Frequency 1.00e+6 Hz
 0.020

@Frequency 1.00e+6 Hz
 IEC 60250
Descriptive Properties Value Comments
Ball Pressure Test, 75°C +/- 2°C PASSES
IEC 60695-10-2
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved