SABIC Innovative Plastics NORYL GTX GTX8720 PPE+PA (Europe-Africa-Middle East)

Category	Polymer , Thermoplastic , Nylon , Polyphenylene Ether/PPO
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	NORYL GTX
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics NORYL GTX GTX8720 PPE+PA (Europe-Africa-Middle East).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Noryl GTX* GTX8720 resin is a glass filled, high performance blend of PPE/PA that exhibits an excellent balance of high-heat resistance, strength, flow, and conductivity. This grade can be electro-statically painted or powder coated without the need for a conductive primer.

Physical Properties	Metric	English	Comments
Specific Gravity	1.26 g/cc	1.26 g/cc	ASTM D792
Density	1.26 g/cc	0.0455 lb/inÂ³	ISO 1183
Moisture Absorption	0.500 %	0.500 %	23Â°C / 50% RH; ISO 62
Water Absorption at Saturation	4.0 %	4.0 %	ISO 62
Linear Mold Shrinkage, Flow	0.0026 - 0.0030 cm/cm @Thickness 3.20 mm	0.0026 - 0.0030 in/in @Thickness 0.126 in	SABIC Method
Linear Mold Shrinkage, Transverse	0.0072 - 0.0085 cm/cm @Thickness 3.20 mm	0.0072 - 0.0085 in/in @Thickness 0.126 in	SABIC Method
Melt Flow	8.6 g/10 min @Load 5.00 kg, Temperature 280 Â°C	8.6 g/10 min @Load 11.0 lb, Temperature 536 Â°F	ASTM D1238
Melt Index of Compound	7.0 g/10 min @Load 5.00 kg, Temperature 280 Â°C	7.0 g/10 min @Load 11.0 lb, Temperature 536 Â°F	MVR [cm^3/10 min]; ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	140 MPa	20300 psi	Type I, 5 mm/min; ASTM D638
	140 MPa	20300 psi	5 mm/min; ISO 527
Tensile Strength, Yield	140 MPa	20300 psi	Type I, 5 mm/min; ASTM D638
	140 MPa	20300 psi	5 mm/min; ISO 527
Elongation at Break	4.0 %	4.0 %	Type I, 5 mm/min; ASTM D638
	4.0 %	4.0 %	5 mm/min; ISO 527
Elongation at Yield	3.1 %	3.1 %	Type I, 5 mm/min; ASTM D638
	3.1 %	3.1 %	5 mm/min; ISO 527
Tensile Modulus	7.00 GPa	1020 ksi	5 mm/min; ASTM D638
	7.00 GPa	1020 ksi	1 mm/min; ISO 527
Flexural Yield Strength	200 MPa	29000 psi	1.3 mm/min, 50 mm span; ASTM D790
	200 MPa	29000 psi	2 mm/min; ISO 178
Flexural Modulus	6.60 GPa	957 ksi	1.3 mm/min, 50 mm span; ASTM D790
	6.60 GPa	957 ksi	2 mm/min; ISO 178
Izod Impact, Notched	0.850 J/cm	1.59 ft-lb/in	ASTM D256
	0.600 J/cm @Temperature -30.0 Â°C	1.12 ft-lb/in @Temperature -22.0 Â°F	ASTM D256
Izod Impact, Notched (ISO)	10.0 kJ/mÂ²	4.76 ft-lb/inÂ²	80104; ISO 180/1A
	8.00 kJ/mÂ² @Temperature -30.0 Â°C	3.81 ft-lb/inÂ² @Temperature -22.0 Â°F	80104; ISO 180/1A
Charpy Impact, Notched	1.10 J/cmÂ²	5.23 ft-lb/inÂ²	Edgew 80104 sp=62mm; ISO 179/1eA
Dart Drop, Total Energy	17.0 J @Temperature 23.0 Â°C	12.5 ft-lb @Temperature 73.4 Â°F	ASTM D3763

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	23.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	12.8 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	23.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	12.8 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
CTE, linear, Transverse to Flow	80.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	44.4 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ASTM E 831
	80.0 Âµm/m-Â°C @Temperature -40.0 - 40.0 Â°C	44.4 Âµin/in-Â°F @Temperature -40.0 - 104 Â°F	ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi)	215 Â°C	419 Â°F	Flatw 80104 sp=64mm; ISO 75/Bf
	215 Â°C @Thickness 3.20 mm	419 Â°F @Thickness 0.126 in	unannealed; ASTM D648
Vicat Softening Point	215 Â°C	419 Â°F	Rate B/50; ASTM D1525
	215 Â°C	419 Â°F	Rate B/50; ISO 306
	225 Â°C	437 Â°F	Rate B/120; ISO 306

Electrical Properties	Metric	English	Comments
Volume Resistivity	1000 - 10000 ohm-cm	1000 - 10000 ohm-cm	SABIC Method

Users viewing this material also viewed the following: