POLYMER SEARCH

Premix Thermoplastics PRE-ELEC® PE 1294

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE
Manufacturer	Premix Thermoplastics Inc.
Trade Name	PRE-ELEC®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Premix Thermoplastics PRE-ELEC® PE 1294.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

PRE-ELEC PE 1294 is a conductive thermoplastic compound based on PE-HD. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC PE 1294has excellent mechanical properties and is easy to injection mould, extrude and blow mould. Typical applications include injection molded pallets, crates, extruded sheets for thermoforming and linings and blow molded drums and canisters. Test Specimen - 4.0 mm thick, 10.0 mm wide molded rod.Information provided by Premix Thermoplastics Inc.

Physical Properties	Metric	English	Comments
Density	1.01 g/cc	0.0365 lb/in³
Linear Mold Shrinkage	0.015 - 0.025 cm/cm	0.015 - 0.025 in/in	ISO 294-4
Melt Flow	2.0 g/10 min @Load 2.16 kg, Temperature 190 °C	2.0 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133
	20 g/10 min @Load 10.0 kg, Temperature 190 °C	20 g/10 min @Load 22.0 lb, Temperature 374 °F	ISO 1133
High Load Melt Index	70 g/10 min @Load 21.6 kg, Temperature 190 °C	70 g/10 min @Load 47.6 lb, Temperature 374 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	66	66	ISO 868
Tensile Strength, Ultimate	12.0 MPa	1740 psi	ISO 527
Tensile Strength, Yield	22.0 MPa	3190 psi	ISO 527
Elongation at Break	180 %	180 %	ISO 527
Elongation at Yield	15 %	15 %	ISO 527
Modulus of Elasticity	0.810 GPa	117 ksi	ISO 178
Izod Impact, Notched	NB @Thickness 4.00 mm, Temperature -20.0 °C	NB @Thickness 0.157 in, Temperature -4.00 °F	ISO 180
	NB @Thickness 4.00 mm, Temperature 23.0 °C	NB @Thickness 0.157 in, Temperature 73.4 °F	ISO 180
Izod Impact, Unnotched	NB @Thickness 4.00 mm, Temperature -20.0 °C	NB @Thickness 0.157 in, Temperature -4.00 °F	ISO 180
	NB @Thickness 4.00 mm, Temperature 23.0 °C	NB @Thickness 0.157 in, Temperature 73.4 °F	ISO 180

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	65.0 °C	149 °F	ISO 75/Method Bf
Deflection Temperature at 1.8 MPa (264 psi)	39.0 °C	102 °F	ISO 75/Method Af
Vicat Softening Point	60.0 °C	140 °F	Rate B; ISO 306/B50
	125 °C	257 °F	Rate A; ISO 306/A50

Electrical Properties	Metric	English	Comments
Volume Resistivity	<= 10000 ohm-cm	<= 10000 ohm-cm	ISO D-257
Surface Resistance	<= 1e+05	<= 1e+05	ISO D-257

Processing Properties	Metric	English	Comments
Middle Barrel Temperature	200 °C	392 °F	Zone 1; Cylinder
	210 °C	410 °F	Zone 2; Cylinder
	220 °C	428 °F	Zone 3; Cylinder
	220 °C	428 °F	Zone 4; Cylinder
	230 °C	446 °F	Zone 5; Cylinder
	230 °C	446 °F	Zone 6; Cylinder
Die Temperature	220 °C	428 °F	Zone 3
	230 °C	446 °F	Zone 2
	230 °C	446 °F	Zone 4
	240 °C	464 °F	Zone 5
	240 °C	464 °F	Zone 1
Melt Temperature	180 - 250 °C	356 - 482 °F
Mold Temperature	30.0 - 70.0 °C	86.0 - 158 °F
Roll Temperature	50.0 °C	122 °F	3rd Roll
	60.0 °C	140 °F	2nd Roll
	70.0 °C	158 °F	1st Roll
Drying Temperature	80.0 °C @Time 7200 - 14400 sec	176 °F @Time 2.00 - 4.00 hour	Pre-drying in a dehumidifier
Moisture Content	<= 0.15 %	<= 0.15 %	When Produced
Injection Pressure	75.2 - 120 MPa	10900 - 17400 psi
Shelf Life	12.0 Month	12.0 Month	Normal Storing Conditions

Descriptive Properties	Value	Comments
Appearance	Granule
Color	Black
Injection Speed	Moderate
Post Pressure, psi	5800 - 8700

Users viewing this material also viewed the following: