Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ISO 527 |
Premix Thermoplastics PRE-ELEC® PE 1294 PRE-ELEC PE 1294 is a conductive thermoplastic compound based on PE-HD. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC PE 129.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | |
3M Dyneon™ Fluorel™ FX-11818 Fluoroelastomer VF2 + HFP + TFE Terpolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 68.6%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. 68.6% F grade terpolymer for difficul.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | |
3M Dyneon™ Fluorel™ FC-2145 Fluoroelastomer VF2 + HFP Dipolymer
(discontinued **) Data provided by the manufacturer, Dyneon LLC.Non-incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, 4% Ca(OH)2, 1.4% Dihydroxy Crosslinker, 0.4% Phosp.. |
|||
Tensile Strength, Ultimate | 12.0 - 85.0 MPa @Temperature 60.0 - 150 °C |
1740 - 12300 psi @Temperature 140 - 302 °F |
Average value: 41.5 MPa Grade Count:3 |
Overview of materials for Polybutylene Terephthalate (PBT), Flame Retardant This property data is a summary of similar materials in the MatWeb database for the category "Polybutylene Terephthalate (PBT), Flame Retardant". Each property range of values reported is minimum an.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
ExxonMobil Optema® TC-020 Ethylene Methyl Acrylate for Injection Molding
(discontinued **) Data provided by the manufacturer, Exxon Chemical.6.5% Methyl Acrylate. An Ethylene Methyl Acrylate copolymer which can be injection molded to produce pliable parts. It can also be used for making.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | 500 mm/min (20 in./min.); Type IV Specimen; ASTM D638 |
Eastman 800A Polyethylene
(discontinued **) Polyethylene 800A is a general-purpose low density formulation used for injection molding applications that require good stress-crack resistance. Polyethylene 800E is used in general-purpose extrus.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | 500 mm/min (20 in./min.); Type IV Specimen; ASTM D638 |
Eastman 800E Polyethylene
(discontinued **) Polyethylene 800E is used in general-purpose extrusion applications that also require good stress resistance. This formula complies with FDA regulations at 21 CFR177.1520 (c)(2.2) for use in articl.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE1037 Film Extrusion Polyethylene
(discontinued **) Homopolymer, and FDA compliant.Features: Medium clarity packaging film and good draw down characteristics.Applications: Film extrusion: general purpose packaging and film applications.FDA Notes: Con.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE2018 Injection Molding Polyethylene
(discontinued **) Homopolymer and FDA compliantFeatures: Good toughness and machinabilityApplications: Injection molding: closures and small items.FDA Notes: Conforms to FDA regulation 21 CFR 177.1520 (c)2.2 under co.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
ExxonMobil Escorene® LD-761 High EVA Compounding Resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A 28% vinyl acetate copolymer designed for high filler acceptance. Compounds produced from this resin have excellent flexibility and toughness.Appl.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE1257 EVA Film Extrusion
(discontinued **) 2.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, good heat seal characteristics.Applications: Film extrusion: general purpose packaging where to.. |
|||
Tensile Strength, Ultimate | 12.0 - 37.0 MPa | 1740 - 5370 psi | Average value: 26.8 MPa Grade Count:212 |
Overview of materials for Polypropylene with 20% Talc Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 20% Talc Filler".Specific grades with primary filler content between 15% and 24% are .. |
|||
Tensile Strength, Ultimate | 12.0 - 30.3 MPa | 1740 - 4400 psi | Average value: 22.5 MPa Grade Count:39 |
Overview of materials for Polypropylene with 20% Calcium Carbonate (CaCO3) Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 20% Calcium Carbonate (CaCO3) Filler". Each property range of values reported is mini.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
ExxonMobil Iotek® 7520 Zinc Ionomer Molding/Extrusion Resin
(discontinued **) Data provided by the manufacturer, Exxon Chemical.A "soft" zinc ionomer with excellent flexibility and impact strength. This ionomer has outstanding adhesion to glass, metals and paper. IOTEK iono.. |
|||
Tensile Strength, Ultimate | 12.0 MPa @Temperature 22.0 °C |
1740 psi @Temperature 71.6 °F |
25mm flat samples, compression moulded; ISO 527-4 |
Menzolit Menzolit® MMC 1600 Unsaturated Polyester UP MMC 1600 is a mineral moulding compound (similar to DMC/BMC) providing of a stone like appearance eg. granite or marble. Chrome plated mould surfaces are required. It is recommended that product thi.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
LyondellBasell Hifaxâ„¢ CA199AC Thermoplastic Olefin Resin Key Features: low melt flow, medium low modulus, paintable thermoplastic olefin resin, excellent balance of properties, high toughness, good paintability, flexibleApplications: automotive air bag do.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Toyobo Pelprene™ P-70B Polyester TPE Key Feature: Pelprene P typePelprene™ can be processed into a wide variety of articles from ultra-small precision parts to sheets by injection, extrusion, and blow molding. The 'P' type is a block.. |
|||
Tensile Strength, Ultimate | 12.0 MPa @Temperature 49.0 °C |
1740 psi @Temperature 120 °F |
Type IV, crosshead speed 2 in/min; ASTM D638 |
DuPont Elvax® 560 Ethylene-Vinyl Acetate Copolymer Resin Elvax resins offer a unique combination of processing and performance characteristics. They provide outstanding toughness and resilience and maintain flexibility over a broad temperature range with.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ISO 527-1 |
Chengdu Polyster FH3303 Thermoplastic Polyether-ester Elastomer (TPEE) Blend of H3303 and self-made flame retardant material. Excellent flex resistance at low temperatures. Excellent flex-fatigue resistance. Applications requiring flexibility at low temperatures and fl.. |
|||
Tensile Strength, Ultimate | 12.0 - 24.0 MPa | 1740 - 3480 psi | |
ATG s.r.l. CSM Chlorosulphonated Polyethylene |
|||
Tensile Strength, Ultimate | 12.0 - 30.0 MPa | 1740 - 4350 psi | |
ATG s.r.l. IR Synthetic Polyisoprene |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE1076 Film Extrusion Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Yields film with high clarity and excellent stiffness.Applications: Film extrusion: overwrap packaging.FDA Notes: Conforms to FDA regulation 21 CFR 177.1520 (.. |
|||
Tensile Strength, Ultimate | 12.0 - 37.2 MPa | 1740 - 5400 psi | Average value: 25.7 MPa Grade Count:47 |
Overview of materials for Ionomer, Molded This property data is a summary of similar materials in the MatWeb database for the category "Ionomer, Molded". Each property range of values reported is minimum and maximum values of appropriate Ma.. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Westlake EMAC® SP 1205 Ethylene-Methyl Acrylate Copolymer
(discontinued **) 20% Methyl Acrylate Content. Characteristics: Processing Temperature Range: 280-600°F, Less Crystalline and Softer than Polyethylene, Excellent Thermal Stability Allows Extrusion Processing up to .. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE1158 EVA Film Extrusion
(discontinued **) 1.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: .. |
|||
Tensile Strength, Ultimate | 12.0 MPa | 1740 psi | ASTM D638 |
Huntsman PE 1375 EVA Film Extrusion
(discontinued **) 3.7% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Excellent balance of optical and strength, toughness and flexibility at low temperatures, and good heat seal characteristic.Applications: .. |