Polymer Resources PPX-FR6 Modified-PPO, V-0 Flame Retardant

Category	Polymer , Thermoplastic , Polyphenylene Ether/PPO , Polyphenylene Ether, Heat Resistant
Manufacturer	Polymer Resources, LTD
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Polymer Resources PPX-FR6 Modified-PPO, V-0 Flame Retardant.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Modified-Polyphenylene Oxide, V-0 Flame Retardant, 300F HDTFeatures: • Bromine Free • Chlorine FreeProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by Polymer Resources Corporation.

Physical Properties	Metric	English	Comments
Specific Gravity	1.07 g/cc	1.07 g/cc	ASTM D792
Linear Mold Shrinkage	0.0050 - 0.0070 cm/cm	0.0050 - 0.0070 in/in	ASTM D955
Melt Flow	1.0 - 3.0 g/10 min @Load 11.6 kg, Temperature 250 °C	1.0 - 3.0 g/10 min @Load 25.6 lb, Temperature 482 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	66.9 MPa	9700 psi	ASTM D638
Tensile Strength, Yield	70.3 MPa	10200 psi	ASTM D638
Elongation at Break	20 %	20 %	ASTM D638
Flexural Strength	98.6 MPa	14300 psi	ASTM D790
Flexural Modulus	2.34 GPa	340 ksi	ASTM D790
Izod Impact, Notched	1.60 J/cm @Temperature 22.8 °C	3.00 ft-lb/in @Temperature 73.0 °F	ASTM D256
Charpy Impact, Notched	1.26 J/cm² @Temperature 22.8 °C	6.00 ft-lb/in² @Temperature 73.0 °F	ISO 179/1eA
Gardner Impact	22.6 J	16.7 ft-lb	ASTM D3029

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	149 °C	300 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	141 °C	285 °F	ASTM D648
Vicat Softening Point	141 °C	285 °F	120°C/h, 50 N; ASTM D1525
UL RTI, Electrical	65.0 °C @Thickness 1.50 mm	149 °F @Thickness 0.0591 in	UL 746
	65.0 °C @Thickness 3.00 mm	149 °F @Thickness 0.118 in	UL 746
UL RTI, Mechanical with Impact	65.0 °C @Thickness 1.50 mm	149 °F @Thickness 0.0591 in	UL 746
	65.0 °C @Thickness 3.00 mm	149 °F @Thickness 0.118 in	UL 746
UL RTI, Mechanical without Impact	65.0 °C @Thickness 1.50 mm	149 °F @Thickness 0.0591 in	UL 746
	65.0 °C @Thickness 3.00 mm	149 °F @Thickness 0.118 in	UL 746
Flammability, UL94	V-0 @Thickness 1.50 mm	V-0 @Thickness 0.0591 in
	V-0 @Thickness 3.00 mm	V-0 @Thickness 0.118 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	ASTM D257

Processing Properties	Metric	English
Rear Barrel Temperature	260 - 304 °C	500 - 580 °F
Middle Barrel Temperature	271 - 310 °C	520 - 590 °F
Front Barrel Temperature	282 - 316 °C	540 - 600 °F
Melt Temperature	293 - 316 °C	560 - 600 °F
Mold Temperature	82.2 - 116 °C	180 - 240 °F
Drying Temperature	104 - 110 °C	220 - 230 °F
Dry Time	3.00 - 4.00 hour	3.00 - 4.00 hour

Descriptive Properties	Value	Comments
Vent	0.001

Users viewing this material also viewed the following: