- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene with 40% Talc Filler
- A. Schulman POLYFORT™ FPP 1007X Extra High Flow, Talc Fortified Homopolymer Polypropylene
A. Schulman POLYFORT™ FPP 1007X Extra High Flow, Talc Fortified Homopolymer Polypropylene
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene with 40% Talc Filler |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | A. Schulman POLYFORT™ FPP 1007X Extra High Flow, Talc Fortified Homopolymer Polypropylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
DescriptionPolyfort® FPP 1007X is an extra high flow, 40% talc fortified homopolymer polypropylene. Information provided by A. Schulman.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.23 g/cc | 1.23 g/cc | ASTM D792 |
| Melt Flow | 20 - 30 g/10 min @Temperature 230 °C |
20 - 30 g/10 min @Temperature 446 °F |
Condition L; ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 97 | 97 | ASTM D785 |
| Tensile Strength, Yield | 29.7 MPa | 4310 psi | ASTM D638 |
| Flexural Modulus | 3.585 GPa | 520.0 ksi | ASTM D790 |
| Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | ASTM D256 |
| Izod Impact, Unnotched | 2.68 J/cm | 5.02 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 132 °C | 270 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 76.0 °C | 169 °F | ASTM D648 |
Users viewing this material also viewed the following:
- Kazanorgsintez Diethanolamine
- Multibase Multi-Flamâ„¢ 0501 PP Polypropylene
- Chase Plastics CP Pryme® N100L (COND, 50% RH) Nylon 6, Internally Lubricated
- Cosmic Plastics K66 Long Glass Fiber Filled Iso Diallyl Phthalate Molding Compound
- A. Schulman PP 2175 Polypropylene High Flow Copolymer Polypropylene
- Zotefoams Plastazote® LD33 Low Density Polyethylene Foam
- Lubrizol ESTANE® 58863 Ether Based Thermoplastic Polyurethane
- Chevron Phillips K-Resin® KR01 Styrene-Butadiene Copolymer, Injection Molding Grade
- ChevronTexaco Delo® 400 SAE 40
- Mateck Zinc Selenide, ZnSe
Copyright © lookpolymers.com All Rights Reserved