Polymer Resources ABS-G25 ABS, 25% Glass Reinforced

Category	Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), 30% Glass Fiber Filled
Manufacturer	Polymer Resources, LTD
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Polymer Resources ABS-G25 ABS, 25% Glass Reinforced.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Acrylonitrile Butadiene Styrene, 25% Glass ReinforcedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by Polymer Resources Corporation.

Physical Properties	Metric	English	Comments
Specific Gravity	1.23 g/cc	1.23 g/cc	ASTM D792
Linear Mold Shrinkage	0.0010 - 0.0030 cm/cm	0.0010 - 0.0030 in/in	ASTM D955
Melt Flow	0.50 - 5.0 g/10 min @Load 3.80 kg, Temperature 230 °C	0.50 - 5.0 g/10 min @Load 8.38 lb, Temperature 446 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	93.1 MPa	13500 psi	ASTM D638
Tensile Strength, Yield	93.1 MPa	13500 psi	ASTM D638
Elongation at Yield	1.5 %	1.5 %	ASTM D638
Flexural Strength	128 MPa	18500 psi	ASTM D790
Flexural Modulus	7.58 GPa	1100 ksi	ASTM D790
Izod Impact, Notched	0.534 J/cm @Temperature 22.8 °C	1.00 ft-lb/in @Temperature 73.0 °F	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	110 °C	230 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	104 °C	220 °F	ASTM D648

Processing Properties	Metric	English
Rear Barrel Temperature	191 - 199 °C	375 - 390 °F
Middle Barrel Temperature	210 - 221 °C	410 - 430 °F
Front Barrel Temperature	210 - 227 °C	410 - 440 °F
Melt Temperature	210 - 238 °C	410 - 460 °F
Mold Temperature	48.9 - 60.0 °C	120 - 140 °F
Drying Temperature	79.4 - 85.0 °C	175 - 185 °F
Dry Time	3.00 - 4.00 hour	3.00 - 4.00 hour

Descriptive Properties	Value	Comments
Vent	0.001

Users viewing this material also viewed the following: