- HOME
- POLYMER SEARCH
- Thermoplastic
- Acetal (POM)
- Acetal Copolymer, Silicone Filled
- PolyOne Lubri-Tech™ 5209 S2 Natural A Acetal Copolymer, 9 Melt with Silicone (discontinued **)
PolyOne Lubri-Tech™ 5209 S2 Natural A Acetal Copolymer, 9 Melt with Silicone (discontinued **)
| Category | Polymer , Thermoplastic , Acetal (POM) , Acetal Copolymer, Silicone Filled |
| Manufacturer | |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PolyOne Lubri-Tech™ 5209 S2 Natural A Acetal Copolymer, 9 Melt with Silicone
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by PolyOne™ Corporation
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.41 g/cc | 1.41 g/cc | ASTM D792 |
| Water Absorption | 0.050 % | 0.050 % | 24 Hr; ASTM D570 |
| Linear Mold Shrinkage | 0.022 - 0.024 cm/cm | 0.022 - 0.024 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 51.7 MPa | 7500 psi | ASTM D638 |
| Elongation at Break | 45 % | 45 % | ASTM D638 |
| Tensile Modulus | 2.34 GPa | 340 ksi | ASTM D638 |
| Flexural Strength | 82.7 MPa | 12000 psi | ASTM D790 |
| Flexural Modulus | 2.34 GPa | 340 ksi | ASTM D790 |
| Izod Impact, Notched | 0.694 J/cm | 1.30 ft-lb/in | ASTM D648 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 234 µm/m-°C @Temperature 20.0 °C |
130 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Deflection Temperature at 1.8 MPa (264 psi) | 85.0 °C | 185 °F | ASTM D648 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 188 - 210 °C | 370 - 410 °F | |
| Mold Temperature | 48.9 - 82.2 °C | 120 - 180 °F | |
| Drying Temperature | 82.2 °C | 180 °F |
Users viewing this material also viewed the following:
- Master Bond EP79FL Two Component Silver Nickel Conductive Epoxy Adhesive
- Plenco 3509 Phenolic, Granular, Compression Molded
- Diamond Polymers Softflex® SF 7001 Thermoplastic Vulcanizate (TPV)
- Cast Nylons Nycast® 6PA-Natural Nylon 6, Food Grade
- BASF Ultramid® NBX-0025 NF2001 PA66 (Conditioned)
- Adell AR-17 Nylon 66, 35% Glass Reinforced
- Dow Corning ST Dimethiconol 40
- Solvay Specialty Polymers AvaSpire® AV-621 GF30 Polyaryletherketone (PAEK) (Unverified Data**)
- Asahi Kasei Thermylene® P-9900-0712 Chemically Coupled Polypropylene Compound
- Haynes 556® alloy, sheet after 1000 hours at 871°C (1600°F)
Copyright © lookpolymers.com All Rights Reserved