- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 612
- PolyOne Edgetek® NL-23CF/000 Nylon 6/12, Carbon Fiber Reinforced (discontinued **)
PolyOne Edgetek® NL-23CF/000 Nylon 6/12, Carbon Fiber Reinforced (discontinued **)
| Category | Polymer , Thermoplastic , Nylon , Nylon 612 |
| Manufacturer | |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PolyOne Edgetek® NL-23CF/000 Nylon 6/12, Carbon Fiber Reinforced
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description/Features:Carbon Fiber ReinforcedInformation provided by PolyOne Corporation.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.18 g/cc | 1.18 g/cc | ASTM D792 |
| Water Absorption | 0.23 % @Thickness 3.17 mm |
0.23 % @Thickness 0.125 in |
24 hr. Immersion; ASTM D570 |
| Linear Mold Shrinkage | 0.0015 - 0.0025 cm/cm | 0.0015 - 0.0025 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 165 MPa | 24000 psi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Elongation at Break | 3.0 % | 3.0 % | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Tensile Modulus | 10.3 GPa | 1500 ksi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| Flexural Strength | 296 MPa | 43000 psi | ASTM D790 |
| Flexural Modulus | 10.3 GPa | 1500 ksi | ASTM D790 |
| Izod Impact, Notched | 1.60 J/cm @Thickness 6.35 mm, Temperature 23.0 °C |
3.00 ft-lb/in @Thickness 0.250 in, Temperature 73.4 °F |
Method A, Injection Molded; ASTM D256 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 100 - 10000 ohm-cm | 100 - 10000 ohm-cm | ASTM D257 |
| Surface Resistivity per Square | 100 - 10000 ohm | 100 - 10000 ohm | ASTM D257 |
Users viewing this material also viewed the following:
- MV Labs RU490 [Ru(C10H8N2)3]Cl2·6H2O Tris(2,2'-bipyridyl)dichlororuthenium(II) dichloride hexahydrate
- PolyOne Maxxam™ PD 2201 Polypropylene, Unspecified (PP, Unspecified)
- Polymax® Maxelast® P3740 TPE, PP Overmold or Standalone use
- Plastcom SLOVAMID 6 GF 15 MI/2 PA6, 15% glass fibre, improved strength
- Haynes Hastelloy® N, 1.14 mm sheet, aged 10000 hours at 704°C (1300°F)
- Solvay TECHNYL® A 118L V50 PA66, 50% glass fiber, Eh 0
- A. Schulman POLYFORT™ PP 7001
- Braskem Green PE SLL218/21 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethylene
- Chem Polymer Chemlon 109-18 G Nylon 66, 18% Glass Fiber Reinforced
- 3M Scotchgard™ 1001 Protective Film
Copyright © lookpolymers.com All Rights Reserved