- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyurethane, TP
- Thermoplastic Polyurethane, Elastomer, Polyester Grade
- SK Chemicals SKYTHANE® S392A Polyester Based Thermoplastic Polyurethane Elastomer
SK Chemicals SKYTHANE® S392A Polyester Based Thermoplastic Polyurethane Elastomer
| Category | Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Polyester Grade |
| Manufacturer | SK Chemicals |
| Trade Name | SKYTHANE® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | SK Chemicals SKYTHANE® S392A Polyester Based Thermoplastic Polyurethane Elastomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: SK Chemicals has supplied Thermoplastic Polyurethane Elastomer (TPU) under the name of SKYTHANE. Applications include:Keyboard CoversOutsoles of Soccer ShoesWire and CableAirbagsSheets and FilmHoses and TubingShoe ComponentsFire HosesInformation provided by SK Chemicals.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.21 g/cc | 1.21 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.0040 cm/cm | 0.0040 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 93 | 93 | ASTM D2240 |
| Hardness, Shore D | 50 | 50 | ASTM D2240 |
| Tensile Strength, Ultimate | 44.1 MPa | 6400 psi | ASTM D412 |
| Elongation at Break | 650 % | 650 % | ASTM D412 |
| 100% Modulus | 0.0103 GPa | 1.50 ksi | ASTM D412 |
| 300% Modulus | 0.0200 GPa | 2.90 ksi | ASTM D412 |
| Resilience | 37 | 37 | Vertical Rebound; ASTM D2632 |
| Tear Strength | 118 kN/m | 672 pli | Die C; ASTM D624 |
| Taber Abrasion, mg/1000 Cycles | 35 | 35 | H18 wheel, 1000g load; ASTM D1044 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 110 °C | 230 °F | ASTM D1525 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 195 °C | 383 °F | Transition Temperature |
| 195 °C | 383 °F | Metering Temperature | |
| Middle Barrel Temperature | 190 °C | 374 °F | |
| Nozzle Temperature | 200 °C | 392 °F | |
| Zone 1 | 180 °C | 356 °F | |
| Zone 2 | 185 °C | 365 °F | |
| Zone 3 | 190 °C | 374 °F | |
| Zone 4 | 195 °C | 383 °F | |
| Adapter Temperature | 195 °C | 383 °F | |
| Die Temperature | 195 °C | 383 °F | Tip |
| 200 °C | 392 °F | Body | |
| Mold Temperature | 20.0 - 40.0 °C | 68.0 - 104 °F |
Users viewing this material also viewed the following:
- MV Labs ZR800 Zr(SO4)2·xH2O Zirconium(IV) sulfate hydrate (low Hf)
- Qualchem Danamid AFCF-30 Polyamide 66, 30% Carbon Fiber
- Plastcom SLOVAMID 6 GF 5 PA6, 5% glass fibre
- RheTech Products HP532-00 20% Talc Reinforced High Performance Polypropylene, Non-UV Stabilized, Natural
- Solvay Specialty Polymers Veradel® A-201 Polyethersulfone (PESU) (Unverified Data**)
- Honeywell ACLAR® 11A (2.00 mil) CTFE Homopolymer, Barrier Film (discontinued **)
- Materion Brush 1915â„¢ Hard Temper Wire, 0.375" - 0.500"
- Solvay MACKAZOLINE® T Surfactant
- A. Schulman POLYBATCH™ UVK-90 UV Stabilizer Concentrate Based In Polyethylene
- Permabond ET514 Epoxy Resin
Copyright © lookpolymers.com All Rights Reserved