- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, Unreinforced, Flame Retardant
- Polyram PlusTek PA517 Nylon 6.6, Flame Retardant
Polyram PlusTek PA517 Nylon 6.6, Flame Retardant
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Unreinforced, Flame Retardant |
| Manufacturer | Polyram |
| Trade Name | PlusTek |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyram PlusTek PA517 Nylon 6.6, Flame Retardant.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Flame retardant halogen free polyamide 6.6 formulated to meet V-0, for injection molding applicationsInformation provided by Polyram Ram On Ind.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.50 g/cc | 0.0542 lb/in³ | DIN 53479 |
| Water Absorption | 7.5 % | 7.5 % | DIN 53495 |
| Moisture Absorption at Equilibrium | 2.5 % | 2.5 % | 50%RH; DIN 53714 |
| Linear Mold Shrinkage | 0.010 - 0.014 cm/cm | 0.010 - 0.014 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | ASTM-D638 |
| Elongation at Break | 10 % | 10 % | ASTM-D638 |
| Flexural Strength | 75.0 MPa | 10900 psi | ASTM D790 |
| Flexural Modulus | 3.10 GPa | 450 ksi | ASTM-D790 |
| Izod Impact, Notched | 0.400 J/cm @Temperature 23.0 °C |
0.749 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 250 °C | 482 °F | |
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | Continuous Use |
| 180 °C | 356 °F | Short peaks operation | |
| Deflection Temperature at 0.46 MPa (66 psi) | 95.0 °C | 203 °F | DIN 53461 |
| Deflection Temperature at 1.8 MPa (264 psi) | 220 °C | 428 °F | DIN 53461 |
| Flammability, UL94 | V-0 @Thickness 3.00 mm |
V-0 @Thickness 0.118 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | DIN 53482 |
| Surface Resistance | 1.00e+13 ohm | 1.00e+13 ohm | DIN 53482 |
| Dielectric Constant | 3.3 @Frequency 1e+6 Hz |
3.3 @Frequency 1e+6 Hz |
VDE 0303/4 |
| Dielectric Strength | 70.0 kV/mm | 1780 kV/in | VDE 0303/4 |
Users viewing this material also viewed the following:
- Precision Polymer Engineering N60K Nitrile Rubber
- Osprey Metals Co452 Cobalt Alloy Powder (Grade 95% - 16)
- PolyOne Bergamid™ A700 G20 UF Polyamide 66 (Nylon 66)
- CeramTec Alunit® HS Aluminum Nitride
- A. Schulman SCHULAMID® 66 GF50 50% Glass Fiber Reinforced 66
- CMT Materials PROTOBLOCK Air Permeable Prototype Tooling Material
- Bapolene® 4062NA Polypropylene, Injection Grade
- Braskem EB853 Cast Film Extrusion Low Density Polyethylene
Copyright © lookpolymers.com All Rights Reserved