Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 30% Glass Fiber Filled , Nylon 66, Glass Fiber Filled, Flame Retardant |
Manufacturer | Plastcom spol. s r.o. |
Trade Name | SLOVAMID |
Port | Ningbo port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | Plastcom SLOVAMID 66 GF 25 FRI 3 Polyamide 66, 25% Glass Fiber, Halogen Free Flame Retardant.pdf |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.34 g/cc | 0.0484 lb/in³ | STN 64 0111 |
Linear Mold Shrinkage | 0.0052 cm/cm | 0.0052 in/in | STN 64 0808 |
Linear Mold Shrinkage, Transverse | 0.0097 cm/cm | 0.0097 in/in | STN 64 0808 |
Melt Flow | 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C |
1.0 g/10 min @Load 4.76 lb, Temperature 446 °F |
STN EN ISO 1133 |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 135 MPa | 19600 psi | STN EN ISO 527-2 |
Elongation at Break | 3.0 % | 3.0 % | STN EN ISO 527-2 |
Tensile Modulus | 6.50 GPa | 943 ksi | STN EN ISO 527-2 |
Flexural Strength | 190 MPa | 27600 psi | STN EN ISO 178 |
Flexural Modulus | 7.50 GPa | 1090 ksi | STN EN ISO 178 |
Charpy Impact Unnotched | 4.50 J/cm² @Temperature -20.0 °C |
21.4 ft-lb/in² @Temperature -4.00 °F |
STN EN ISO 179 |
5.00 J/cm² @Temperature 23.0 °C |
23.8 ft-lb/in² @Temperature 73.4 °F |
STN EN ISO 179 | |
Charpy Impact, Notched | 0.700 J/cm² @Temperature -20.0 °C |
3.33 ft-lb/in² @Temperature -4.00 °F |
STN EN ISO 179 |
0.800 J/cm² @Temperature 23.0 °C |
3.81 ft-lb/in² @Temperature 73.4 °F |
STN EN ISO 179 |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 260 °C | 500 °F | DSC; STN EN ISO 3146 |
Deflection Temperature at 1.8 MPa (264 psi) | 240 °C | 464 °F | STN EN ISO 75/A |
Vicat Softening Point | 250 °C | 482 °F | B; STN EN ISO 306 |
Flammability, UL94 | V-0 | V-0 | |
Glow Wire Test | 960 °C | 1760 °F | STN IEC 60695-2-10 |
Electrical Properties | Metric | English | Comments |
---|---|---|---|
Volume Resistivity | 1.00e+17 ohm-cm | 1.00e+17 ohm-cm | STN IEC 60093 |
Surface Resistance | 1.00e+13 ohm | 1.00e+13 ohm | STN IEC 60093 |
Dielectric Strength | 70.0 kV/mm | 1780 kV/in | STN IEC 60243 |
Comparative Tracking Index | 550 V | 550 V | STN 34 6468 |
Processing Properties | Metric | English | Comments |
---|---|---|---|
Melt Temperature | 280 - 300 °C | 536 - 572 °F | |
Mold Temperature | 70.0 - 90.0 °C | 158 - 194 °F | |
Drying Temperature | 80.0 °C | 176 °F | |
Dry Time | 4 hour | 4 hour | |
Moisture Content | 0.15 % | 0.15 % | STN EN ISO 960 |
Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi |