POLYMER SEARCH

Murtfeldt Murlubric® Oil Modified Nylon 6

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Cast
Manufacturer	Murtfeldt Kunststoffe GmbH & Co
Trade Name	Murlubric®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Murtfeldt Murlubric® Oil Modified Nylon 6.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Murlubric® is a modified cast polyamide that mineral oil is integrated into during polymerization. As a result, the material has self lubricating properties and retains its excellent characteristics for its entire lifetime.Special Properties:• Excellent slide properties• Wear-resistant, even in abrasive applications• High mechanical strength• Self-lubricating• Vibration-free running• Low residual stress• Good lubricant resistance• High dynamic load-bearing capacityInformation provided by Murtfeldt Kunststoffe GmbH & Co. KG.

Physical Properties	Metric	English	Comments
Density	1.135 g/cc	0.04100 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	2.0 % @Temperature 23.0 °C	2.0 % @Temperature 73.4 °F	50% RH
Water Absorption at Saturation	6.3 % @Temperature 23.0 °C	6.3 % @Temperature 73.4 °F

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	82	82	dry; ISO 2039-2
Hardness, Shore D	75	75	DIN 53505
Ball Indentation Hardness	145 MPa	21000 psi	dry; ISO 2039-1
Tensile Strength	72.0 MPa	10400 psi	ISO 527-1
Elongation at Break	25 %	25 %	ISO 527-1
Creep Strength	18.0 MPa @Time 3.60e+6 sec	2610 psi @Time 1000 hour	stress leading to 1% elongation; dry; ISO 899-1
Modulus of Elasticity	3.00 GPa	435 ksi
Compressive Yield Strength	22.0 MPa @Strain 1.00 %	3190 psi @Strain 1.00 %	dry; ISO 604
	43.0 MPa @Strain 2.00 %	6240 psi @Strain 2.00 %	dry; ISO 604
	79.0 MPa @Strain 5.00 %	11500 psi @Strain 5.00 %	dry; ISO 604
Charpy Impact Unnotched	5.00 J/cm²	23.8 ft-lb/in²	dry; ISO 179-1/1eU
	>= 5.00 J/cm²	>= 23.8 ft-lb/in²	ISO 179
Charpy Impact, Notched	0.400 J/cm²	1.90 ft-lb/in²	dry; ISO 179-1/1eA
Coefficient of Friction, Dynamic	0.18	0.18
Sand Slurry	0.050	0.050	µm/km

Thermal Properties	Metric	English	Comments
CTE, linear	80.0 µm/m-°C @Temperature 23.0 - 60.0 °C	44.4 µin/in-°F @Temperature 73.4 - 140 °F
	90.0 µm/m-°C @Temperature 23.0 - 100 °C	50.0 µin/in-°F @Temperature 73.4 - 212 °F
Thermal Conductivity	0.280 W/m-K	1.94 BTU-in/hr-ft²-°F
Melting Point	215 °C	419 °F	ISO 11357-1
Maximum Service Temperature, Air	90.0 °C @Time 7.20e+7 sec	194 °F @Time 20000 hour
	105 °C @Time 1.80e+7 sec	221 °F @Time 5000 hour
	165 °C @Time <=86400 sec	329 °F @Time <=24.0 hour
Minimum Service Temperature, Air	-20.0 °C	-4.00 °F
Glass Transition Temp, Tg	50.0 °C	122 °F	ISO 11357-1
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Electrical Resistivity	>= 1.00e+14 ohm-cm	>= 1.00e+14 ohm-cm	dry; IEC 60093
Surface Resistance	>= 1.00e+13 ohm	>= 1.00e+13 ohm	dry; IEC 60093
Dielectric Constant	3.1 @Frequency 1.00e+6 Hz	3.1 @Frequency 1.00e+6 Hz	dry; IEC 60250
	3.5 @Frequency 100 Hz	3.5 @Frequency 100 Hz	dry; IEC 60250
Dielectric Strength	22.0 kV/mm	559 kV/in	dry; IEC 60243-1
Dielectric Loss Index	0.015 @Frequency 100 Hz	0.015 @Frequency 100 Hz	dry; IEC 60250
	0.016 @Frequency 1.00e+6 Hz	0.016 @Frequency 1.00e+6 Hz	dry; IEC 60250

Compliance Properties	Metric	English	Comments
FDA	Yes	Yes

Descriptive Properties	Value	Comments
Color	Black

Users viewing this material also viewed the following: