- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Vulcanizate Elastomer (TPV)
- Multibase TPSiV® 3111-60A Thermoplastic Elastomer
Multibase TPSiV® 3111-60A Thermoplastic Elastomer
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Vulcanizate Elastomer (TPV) , Silicone, Thermoplastic |
| Manufacturer | Multibase |
| Trade Name | TPSiV® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase TPSiV® 3111-60A Thermoplastic Elastomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
FEATURES & BENEFITS: Soft silky feel; Excellent abrasion and scratch resistance; Excellent bonding to PC, ABS; Hydrolysis resistant; FDA 21 CFR 177.2600 CompliantAPPLICATIONS: Solution for soft touch overmolding on consumer electronics, mobile communication devices, computers, and sport &leisure applications; Seals and enclosures.Information provided by Multibase, a Dow Corning Company
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.15 g/cc | 1.15 g/cc | ISO 1183 |
| Linear Mold Shrinkage | 0.010 - 0.030 cm/cm | 0.010 - 0.030 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 63 | 63 | ISO 868 |
| Tensile Strength | 5.70 MPa | 827 psi | ISO 37 |
| Tensile Strength, Ultimate | 3.20 MPa | 464 psi | ISO 37 |
| Elongation at Break | 475 % | 475 % | ISO 37 |
| Flexural Strength | 1.20 MPa | 174 psi | ISO 178 |
| Flexural Modulus | 0.0221 GPa | 3.21 ksi | ISO 178 |
| Tear Strength | 25.3 kN/m | 144 pli | ISO 34 |
| Compression Set | 13 % @Temperature 23.0 °C, Time 79200 sec |
13 % @Temperature 73.4 °F, Time 22.0 hour |
ISO 815 |
| 72 % @Temperature 70.0 °C, Time 79200 sec |
72 % @Temperature 158 °F, Time 22.0 hour |
ISO 815 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Feed Temperature | 185 - 195 °C | 365 - 383 °F | |
| Middle Barrel Temperature | 190 - 200 °C | 374 - 392 °F | |
| Front Barrel Temperature | 200 - 215 °C | 392 - 419 °F | |
| Nozzle Temperature | 205 - 220 °C | 401 - 428 °F | |
| Melt Temperature | 215 °C | 419 °F | |
| Mold Temperature | 30.0 - 60.0 °C | 86.0 - 140 °F | |
| Drying Temperature | 65.0 - 80.0 °C | 149 - 176 °F | |
| Dry Time | 2 - 4 hour | 2 - 4 hour |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Injection Speed | MED-FAST |
Users viewing this material also viewed the following:
- Lubriplate FGL 2 Aluminum Complex USP Mineral Oil-Based Food Machinery Grade Grease
- Materion Beryllium Copper Alloy 10 Forgings & Extrusions; A (TB00) Temper (UNS C17500)
- Indium Corp. Indalloy 14 Pure Gallium
- Techmer ES HiFill® PA6 E U
- DuPont Elvanol® 70-63 Polyvinyl Alcohol Fully Hydrolyzed General Purpose Grade
- Daikin POLYFLON MG-1050 PTFE 25% Glass Fiber Filled Molding Powder
- Axion Polymers Axpoly® PP06 5001 Enhanced Black General Purpose Polypropylene
- Braskem Green PE SLL118 Blow Film Extrusion and Cast Film Extrusion Linear Low Density Polyethylene
- Phillips 66 COPYLENE® CH016 Polypropylene, Homopolymer, BOPP
Copyright © lookpolymers.com All Rights Reserved