- HOME
- POLYMER SEARCH
- Thermoset
- Polyester, TS
- Pyrotek TS-117 Thermoset Electrical Insulation Product (Nema Grade: GPO-1)
Pyrotek TS-117 Thermoset Electrical Insulation Product (Nema Grade: GPO-1)
| Category | Polymer , Thermoset , Filled/Reinforced Thermoset , Polyester, TS |
| Manufacturer | Pyrotek, Inc. |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Pyrotek TS-117 Thermoset Electrical Insulation Product (Nema Grade: GPO-1).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Glass reinforcement, Polyester resin, Gray color. Economical, general purpose product.Information provided by Pyrotek.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.89 g/cc | 0.0683 lb/in³ | |
| Water Absorption | 0.35 % | 0.35 % |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Flexural Strength | 130 MPa | 18900 psi | |
| Compressive Strength | 250 MPa | 36300 psi |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 127 °C | 261 °F | Continuous |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 2.00e+8 ohm-cm | 2.00e+8 ohm-cm | |
| Dielectric Strength | 17.0 kV/mm | 432 kV/in | |
| Arc Resistance | 150 sec | 150 sec |
Users viewing this material also viewed the following:
- 3M Dyneon™ PFA 6502TA Perfluoroalkoxy Fluorothermoplastic (discontinued **)
- Shin-Etsu Silicones KE-2090-10A/B Self-adhesive LIMS Silicone
- Covestro Makrolon® 3258 Polycarbonate
- Elmer's Products Aron Alpha® 403TB Cyanoacrylate Adhesive (Industrial Krazy Glue™)
- Ensinger Tecapeek® XP-113 Compression Molded PEEK Compound, 10% PTFE, 15% Graphite, and 3% Carbon Fiber
- Dow STRANDFOAM™ EA 1000 Polypropylene Foam
- CMW® ELKALOY D110 Copper Alloy, Aluminum Bronze
- Amco Amalloy® B1172 Polymer Alloy
- Phillips 66 COPYLENE® CH200LN-02 Polypropylene, Homopolymer, Rx grade, Nucleated, Lube, Injection Molding
Copyright © lookpolymers.com All Rights Reserved