- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Mitsui Arlenâ„¢ A315 15% Glass Fiber-Reinforced Modified Nylon 6T (DAM)
Mitsui Arlenâ„¢ A315 15% Glass Fiber-Reinforced Modified Nylon 6T (DAM)
| Category | Polymer , Thermoplastic , Nylon |
| Manufacturer | Mitsui Chemicals America |
| Trade Name | Arlen™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Mitsui Arlenâ„¢ A315 15% Glass Fiber-Reinforced Modified Nylon 6T (DAM).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
ARLEN™ is a heat resistant, modified polyamide 6T developed by Mitsui Chemicals, Inc. With a high melting point (320°C) and a rigidity level comparable to super engineering plastics, it possesses strong dimensional stability and chemical resistance. In addition, the effect of water absorption, which is a traditional weakness of polyamides, has been reduced to a minimum.Applications: Cylinder head coversThermostat casesOil pump housingsHydraulic system pistonsCooling system partsRoller/pulley partsInformation provided by Mitsui.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.30 g/cc | 0.0470 lb/in³ | ASTM D792 |
| Filler Content | 15 % | 15 % | |
| Water Absorption | 0.4 % @Thickness 2.00 mm |
0.4 % @Thickness 0.0787 in |
24 hours in 23°C water; ASTM D570 |
| 2.5 % @Thickness 2.00 mm |
2.5 % @Thickness 0.0787 in |
24 hours in 100°C water; ASTM D570 | |
| Linear Mold Shrinkage, Flow | 0.0050 cm/cm @Thickness 2.00 mm |
0.0050 in/in @Thickness 0.0787 in |
ASTM D955 |
| Linear Mold Shrinkage, Transverse | 0.0060 cm/cm @Thickness 2.00 mm |
0.0060 in/in @Thickness 0.0787 in |
Vertical Direction; ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 105 | 105 | ASTM D785 |
| Tensile Strength at Break | 120 MPa | 17400 psi | ASTM D638 |
| Elongation at Break | 3.0 % | 3.0 % | Measured between the chucks; ASTM D638 |
| Flexural Strength | 190 MPa | 27600 psi | ASTM D790 |
| Flexural Modulus | 6.00 GPa | 870 ksi | ASTM D790 |
| Izod Impact, Notched | 0.500 J/cm | 0.937 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 55.0 µm/m-°C @Temperature 20.0 °C |
30.6 µin/in-°F @Temperature 68.0 °F |
Vertical Direction; ASTM D696 |
| CTE, linear, Parallel to Flow | 34.0 µm/m-°C @Temperature 20.0 °C |
18.9 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Melting Point | 320 °C | 608 °F | |
| Deflection Temperature at 1.8 MPa (264 psi) | 290 °C | 554 °F | ASTM D648 |
| Glass Transition Temp, Tg | 125 °C | 257 °F | |
| Flammability, UL94 | HB | HB |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.2 @Frequency 1e+6 Hz |
4.2 @Frequency 1e+6 Hz |
ASTM D150 |
| Dielectric Strength | 25.0 kV/mm | 635 kV/in | ASTM D149 |
| Dissipation Factor | 0.020 @Frequency 1e+6 Hz |
0.020 @Frequency 1e+6 Hz |
ASTM D150 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Feed Temperature | 50.0 - 90.0 °C | 122 - 194 °F | Hopper Bottom Temp for Mechanical and Structural Standard Molding |
| 50.0 - 90.0 °C | 122 - 194 °F | Hopper Bottom for Electronic and Electric Standard Molding | |
| Nozzle Temperature | 315 - 335 °C | 599 - 635 °F | NH Cylinder Temp for Electronic and Electric Standard Molding |
| 325 - 340 °C | 617 - 644 °F | NH Cylinder Temp for Mechanical and Structural Standard Molding | |
| Zone 1 | 300 - 325 °C | 572 - 617 °F | C1 Cylinder Temp for Electronic and Electric Standard Molding |
| 315 - 330 °C | 599 - 626 °F | C1 Cylinder Temp for Mechanical and Structural Standard Molding | |
| Zone 2 | 315 - 335 °C | 599 - 635 °F | C2 Cylinder Temp for Electronic and Electric Standard Molding |
| 320 - 335 °C | 608 - 635 °F | C2 Cylinder Temp for Mechanical and Structural Standard Molding | |
| Zone 3 | 320 - 335 °C | 608 - 635 °F | C3 Cylinder Temp for Electronic and Electric Standard Molding |
| 325 - 340 °C | 617 - 644 °F | C3 Cylinder Temp for Mechanical and Structural Standard Molding | |
| Mold Temperature | 90.0 - 140 °C | 194 - 284 °F | for Mechanical and Structural Standard Molding |
| 90.0 - 140 °C | 194 - 284 °F | for Electronic and Electric Standard Molding | |
| Screw Speed | 150 rpm | 150 rpm | for Mechanical and Structural Standard Molding |
| 150 rpm | 150 rpm | for Electronic and Electric Standard Molding |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Injection Pressure | Medium | Electronic and Electric Standard Molding |
| Medium | Mechanical and Structural Standard Molding | |
| Injection Speed | Medium | Electronic and Electric Standard Molding |
| Medium | Mechanical and Structural Standard Molding |
Users viewing this material also viewed the following:
- Radici Radilon® S ESL128 (dry) Nylon 6
- NOVA Chemicals Surpass® RMs539-U Octene sMDPE Rotational Molding Film
- Kuraray Genestarâ„¢ GN2332 Nylon, 33% Glass Filled
- SABIC Innovative Plastics LNP THERMOCOMP UX93847 PPA (Asia Pacific)
- CRG Industries Essemplex AB43 Thermoplastic Shape Memory Polymer Resin
- Braskem LL6800N LLDPE Blown Film Extrusion Polyethylene Copolymer
- 3M Scotch® 70 HDT Self-Fusing Silicone Rubber Electrical Tape with Tapered Edge
- Atom Adhesives AA-DUCT 2924 Epoxy Adhesive
- 3M 8911 Polyester Tape
Copyright © lookpolymers.com All Rights Reserved