POLYMER SEARCH

Mitsubishi XantarÂ® MX 1071 FD Polycarbonate

Category	Polymer , Thermoplastic , Polycarbonate (PC) , Polycarbonate, Molded
Manufacturer	Mitsubishi
Trade Name	Xantar®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Mitsubishi XantarÂ® MX 1071 FD Polycarbonate.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

XantarÂ® materials are engineered for performance, consistency and reliability. This makes XantarÂ® resins ideal for interior automotive components, electrical equipment and consumer appliances where quality is a key requirement. The XantarÂ® range includes: clear and tinted grades for transparent applicationsreinforced materialsFlame retardant and halogen free typeslubricated materials for added wear resistanceMitsubishi Engineering Plastics acquired the XantarÂ® product line from DSM in 2010.

Physical Properties	Metric	English	Comments
Density	1.20 g/cc	0.0434 lb/inÂ³	ISO 1183
Water Absorption	0.25 %	0.25 %	Sim. to ISO 62
Viscosity Test	60 cmÂ³/g	60 cmÂ³/g	Limiting Viscosity Number; ISO 1628-4
Linear Mold Shrinkage, Flow	0.0060 cm/cm	0.0060 in/in	ISO 294-4
Melt Flow	3.6 g/10 min @Load 1.20 kg, Temperature 300 Â°C	3.6 g/10 min @Load 2.65 lb, Temperature 572 Â°F	Calculated from Volume Flow Rate of 3 cm<sup>3</sup>/10min.; ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	70	70	ISO 2039-2
Tensile Strength, Yield	60.0 MPa	8700 psi	ISO 527-1/-2
Elongation at Break	>= 50 %	>= 50 %	ISO 527-1/-2
Elongation at Yield	6.0 %	6.0 %	ISO 527-1/-2
Tensile Modulus	2.30 GPa	334 ksi	ISO 527-1/-2
Flexural Strength	90.0 MPa	13100 psi	ISO 178
Flexural Modulus	2.40 GPa	348 ksi	ISO 178
Izod Impact, Notched (ISO)	80.0 kJ/mÂ² @Temperature 23.0 Â°C	38.1 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 180/4A

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	65.0 Âµm/m-Â°C @Temperature 20.0 Â°C	36.1 Âµin/in-Â°F @Temperature 68.0 Â°F	ISO 11359-1/-2
Maximum Service Temperature, Air	125 Â°C	257 Â°F	Ball Pressure Temperature; IEC 60695-10-2
Deflection Temperature at 1.8 MPa (264 psi)	135 Â°C	275 Â°F	ISO 75-1/-2
Vicat Softening Point	145 Â°C	293 Â°F	50Â°C/h 50N; ISO 306
UL RTI, Electrical	130 Â°C @Thickness 1.50 mm	266 Â°F @Thickness 0.0591 in	UL746B
	130 Â°C @Thickness 3.00 mm	266 Â°F @Thickness 0.118 in	UL746B
UL RTI, Mechanical with Impact	125 Â°C @Thickness 1.50 mm	257 Â°F @Thickness 0.0591 in	UL746B
	130 Â°C @Thickness 3.00 mm	266 Â°F @Thickness 0.118 in	UL746B
UL RTI, Mechanical without Impact	125 Â°C @Thickness 1.50 mm	257 Â°F @Thickness 0.0591 in	UL746B
	130 Â°C @Thickness 3.00 mm	266 Â°F @Thickness 0.118 in	UL746B
Flammability, UL94	V-2 @Thickness 1.60 mm	V-2 @Thickness 0.0630 in	IEC 60695-11-10
	V-2 @Thickness 3.00 mm	V-2 @Thickness 0.118 in	IEC 60695-11-10
Oxygen Index	26 %	26 %	ISO 4589-1/-2

Optical Properties	Metric	English	Comments
Transmission, Visible	89 %	89 %	Light Transmittance; ASTM D1003

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+15 ohm-cm	>= 1.00e+15 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+15 ohm	>= 1.00e+15 ohm	IEC 60093
Dielectric Constant	2.9 @Frequency 1e+6 Hz	2.9 @Frequency 1e+6 Hz	IEC 60250
	3.0 @Frequency 100 Hz	3.0 @Frequency 100 Hz	IEC 60250
Dielectric Strength	29.0 kV/mm	737 kV/in	IEC 60243-1
Dissipation Factor	0.00066 @Frequency 100 Hz	0.00066 @Frequency 100 Hz	IEC 60250
	0.0092 @Frequency 1e+6 Hz	0.0092 @Frequency 1e+6 Hz	IEC 60250
Comparative Tracking Index	225 V	225 V	IEC 60112
	250 - 399 V	250 - 399 V	PLC 2; UL 746A

Descriptive Properties	Value	Comments
Blow Molding	Yes
Injection molding	Yes
Release Agent	Yes
Without Fillers	Yes

Users viewing this material also viewed the following: