Menzolit MenzolitÂ® BMC 1500 Unsaturated Polyester UP

Category	Polymer , Thermoset , Polyester, TS , Thermoset Polyester Glass Filled BMC
Manufacturer	Menzolit
Trade Name	Menzolit®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Menzolit MenzolitÂ® BMC 1500 Unsaturated Polyester UP.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

BMC 1500 is a special BMC for the use at elevated temperature. The glass content is set to a level that combines good flowability with good strength and stiffness properties. Even without a specific fire retardant the fire retardancy HB according to UL 94 is achieved. Typical applications are functional components, housings and covers for kitchen ware, iron handels and similar equipment within the household and appliances industry.Information Provided by Menzolit

Physical Properties	Metric	English	Comments
Density	2.00 g/cc	0.0723 lb/inÂ³	ISO 1183
Water Absorption	<= 0.50 %	<= 0.50 %	ISO 62
Linear Mold Shrinkage	0.00030 cm/cm	0.00030 in/in	ISO 2577

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	32.0 MPa @Temperature 22.0 Â°C	4640 psi @Temperature 71.6 Â°F	25mm flat samples, compression moulded; ISO 527-4
Tensile Strength, Yield	32.0 MPa @Temperature 22.0 Â°C	4640 psi @Temperature 71.6 Â°F	25mm flat samples, compression moulded; ISO 527-4
Elongation at Yield	0.00 %	0.00 %	tensile rupture strain; ISO 527-4
Modulus of Elasticity	14.0 GPa	2030 ksi	25mm flat samples, compression moulded; ISO 527-4
Flexural Strength	100 MPa @Temperature 22.0 Â°C	14500 psi @Temperature 71.6 Â°F	25 mm wide 100 mm long, flat samples; ISO 14125
Flexural Modulus	11.0 GPa @Temperature 22.0 Â°C	1600 ksi @Temperature 71.6 Â°F	25 mm wide 100 mm long, flat samples; ISO 14125
Poissons Ratio	0.30	0.30
Shear Modulus	5.40 GPa	783 ksi	in plane
Charpy Impact, Notched	2.40 J/cmÂ²	11.4 ft-lb/inÂ²	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear	10.0 Âµm/m-Â°C	5.56 Âµin/in-Â°F	ISO 11359-2
Specific Heat Capacity	1.10 J/g-Â°C	0.263 BTU/lb-Â°F
Thermal Conductivity	0.700 W/m-K	4.86 BTU-in/hr-ftÂ²-Â°F
Maximum Service Temperature, Air	190 Â°C	374 Â°F
Deflection Temperature at 1.8 MPa (264 psi)	>= 150 Â°C	>= 302 Â°F	ISO 75-2
Minimum Service Temperature, Air	-40.0 Â°C	-40.0 Â°F
Glass Transition Temp, Tg	185 Â°C	365 Â°F	ISO 11357-2
Flammability, UL94	HB @Thickness 3.00 mm	HB @Thickness 0.118 in
Oxygen Index	22 %	22 %	ISO 4589-2
Glow Wire Test	750 Â°C	1380 Â°F	IEC 60695-2-12

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	IEC 60093
Surface Resistance	1.00e+12 ohm	1.00e+12 ohm	IEC 60093
Dielectric Constant	4.0	4.0	IEC 60250
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 60243-1
Dissipation Factor	0.010	0.010	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Processing Properties	Metric	English	Comments
Processing Temperature	135 - 150 Â°C	275 - 302 Â°F	Injection moulding, matched metal die

Users viewing this material also viewed the following: