Lubrizol Estane® 2103-90AENH Film Grade Thermoplastic Polyurethane Elastomer

Category	Polymer , Film , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Ether Grade
Manufacturer	Lubrizol (former Noveon)
Trade Name	ESTANE®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Lubrizol Estane® 2103-90AENH Film Grade Thermoplastic Polyurethane Elastomer.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Formerly PellethaneFeature: NSF Standard 61 Certified, FDA ComplianceAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by Lubrizol.Lubrizol acquired the Pellethane product line from Dow in 2009.

Physical Properties	Metric	English	Comments
Specific Gravity	1.14 g/cc	1.14 g/cc	ASTM D792
Linear Mold Shrinkage, Flow	0.0070 - 0.010 cm/cm	0.0070 - 0.010 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.0060 cm/cm	0.0060 in/in	ASTM D955
Melt Flow	9.0 g/10 min @Load 8.70 kg, Temperature 224 °C	9.0 g/10 min @Load 19.2 lb, Temperature 435 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	90	90	ASTM D2240
Hardness, Shore D	47	47	ASTM D2240
Tensile Strength, Ultimate	48.2 MPa	6990 psi	ASTM D412
Elongation at Break	560 %	560 %	ASTM D412
50% Modulus	0.00620 GPa	0.899 ksi	ASTM D412
100% Modulus	0.00900 GPa	1.31 ksi	ASTM D412
300% Modulus	0.0172 GPa	2.49 ksi	ASTM D412
Tear Strength	126 kN/m	719 pli	Die C; ASTM D624
Taber Abrasion, mg/1000 Cycles	50	50	H-22 wheel (coarser), 1000g; ASTM D1044
Compression Set	25 %	25 %	22 hrs. @ 77°F (25°C); ASTM D395, Method B
	40 % @Temperature 70.0 °C	40 % @Temperature 158 °F	22 hrs.; ASTM D395, Method B
Tensile Set	60 %	60 %	Elongation Set After Break; ASTM D412

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	155 µm/m-°C @Temperature 20.0 °C	86.1 µin/in-°F @Temperature 68.0 °F	ASTM D696
Vicat Softening Point	90.0 °C	194 °F	120°C/hr, 9.8N; ASTM D1525
Glass Transition Temp, Tg	-34.0 °C	-29.2 °F	DSC

Processing Properties	Metric	English	Comments
Melt Temperature	188 - 204 °C	370 - 399 °F	Extrusion
	193 - 210 °C	379 - 410 °F	Molding
Mold Temperature	16.0 - 60.0 °C	60.8 - 140 °F
Drying Temperature	88.0 - 104 °C	190 - 219 °F	air dew point <-40°C

Users viewing this material also viewed the following: