- HOME
- POLYMER SEARCH
- Thermoplastic
- Polysulfone (PSU)
- Lehmann & Voss LUVOCOM® 1500-0871 Polysulfone, with glass spheres
Lehmann & Voss LUVOCOM® 1500-0871 Polysulfone, with glass spheres
| Category | Polymer , Thermoplastic , Polysulfone (PSU) |
| Manufacturer | Lehmann & Voss & Co. |
| Trade Name | LUVOCOM® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Lehmann & Voss LUVOCOM® 1500-0871 Polysulfone, with glass spheres.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Applications: Isotropic shrinkage characteristics.Chemical and hydrolysis resistance parts, non flammable.High dimensionally stable precision parts, high continuous use temperature.Control disks, cams, sliding elements and other duty parts.Information provided by Lehmann & Voss & Co.KG
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.46 g/cc | 1.46 g/cc | ISO 1183 |
| Water Absorption | <= 0.10 % | <= 0.10 % | 23°C/24h |
| Linear Mold Shrinkage | 0.0050 - 0.010 cm/cm | 0.0050 - 0.010 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Stress | 75.0 MPa | 10900 psi | |
| Elongation at Yield | 3.5 % | 3.5 % | |
| 4.7 % | 4.7 % | flexural | |
| Modulus of Elasticity | 3.80 GPa | 551 ksi | |
| Flexural Strength | 105 MPa | 15200 psi | |
| Flexural Modulus | 3.20 GPa | 464 ksi | |
| Charpy Impact Unnotched | 4.00 J/cm² | 19.0 ft-lb/in² | flatwise; ISO 179 1fU |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 150 °C | 302 °F | |
| 170 °C | 338 °F | short term |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistance | >= 1.00e+12 ohm | >= 1.00e+12 ohm | |
| Insulation Resistance | >= 1.00e+12 ohm | >= 1.00e+12 ohm |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 355 °C | 671 °F | mass temp |
| Nozzle Temperature | 350 - 370 °C | 662 - 698 °F | |
| Zone 1 | 340 - 360 °C | 644 - 680 °F | |
| Zone 2 | 345 - 365 °C | 653 - 689 °F | |
| Zone 3 | 350 - 370 °C | 662 - 698 °F | |
| Mold Temperature | 140 - 170 °C | 284 - 338 °F | |
| Drying Temperature | 140 °C @Time 10800 - 14400 sec |
284 °F @Time 3.00 - 4.00 hour |
Dehumidifying dryer |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | natural color (beige) |
Users viewing this material also viewed the following:
- MV Labs SR1400 SrSe Strontium selenide
- Solvay Specialty Polymers Amodel® AT-5001 Polyphthalamide (PPA) Resin, Dry as Molded (discontinued **)
- SABIC Innovative Plastics LNP LUBRILOY K2000 Acetal (Asia Pacific)
- Special Metals INCONEL® 686 Nickel Superalloy (UNS N06686) Plate 0.500 in (12.7 mm)
- SABIC Innovative Plastics Xenoy® 1103 PBT+PC
- SABIC Innovative Plastics LNP VERTON RX07013 PA 66 (Europe-Africa-Middle East)
- Loctite® 420 General Purpose Ethyl Cyanoacrylate Bonding Adhesive
- Eagle Brass 752 Nickel Silver 18%, 3/4 Hard
- Dow Nordel® IP 5565 Dense Extruded Profile
- Polyram RamSter PF392G6 PBT, 30% Glass Fiber
Copyright © lookpolymers.com All Rights Reserved