POLYMER SEARCH

Lanxess DurethanÂ® BC 304 H3.0 000000 Nylon 6

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced
Manufacturer	Lanxess
Trade Name	Durethan®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Lanxess DurethanÂ® BC 304 H3.0 000000 Nylon 6.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

PA 6, injection molding grade, non-reinforced, elastomer-modified, extremely high notched impact strength, including in the dry state and at low temperatures, also applicable for barrier layers in extrusion blow molded containers for e.g. agrochemicals

Physical Properties	Metric	English	Comments
Density	1.06 g/cc	0.0383 lb/inÂ³	ISO 1183
Water Absorption	7.5 %	7.5 %	Test Sim. to ISO 62
Moisture Absorption at Equilibrium	2.2 %	2.2 %	23Â°C/50% R.H.; Test Sim. to ISO 62

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	35.0 MPa	5080 psi	Conditioned; ISO 527-1/-2
	45.0 MPa	6530 psi	ISO 527-1/-2
Elongation at Break	>= 50 %	>= 50 %	Nominal; ISO 527-1/-2
	>= 50 %	>= 50 %	Nominal, Conditioned; ISO 527-1/-2
Elongation at Yield	4.5 %	4.5 %	ISO 527-1/-2
	30 %	30 %	Conditioned; ISO 527-1/-2
Tensile Modulus	0.800 GPa	116 ksi	Conditioned; ISO 527-1/-2
	1.80 GPa	261 ksi	ISO 527-1/-2
Charpy Impact Unnotched	NB @Temperature -30.0 Â°C	NB @Temperature -22.0 Â°F	ISO 179/1eU
	NB @Temperature -30.0 Â°C	NB @Temperature -22.0 Â°F	Conditioned; ISO 179/1eU
	NB @Temperature 23.0 Â°C	NB @Temperature 73.4 Â°F	ISO 179/1eU
	NB @Temperature 23.0 Â°C	NB @Temperature 73.4 Â°F	Conditioned; ISO 179/1eU
Charpy Impact, Notched	2.00 J/cmÂ² @Temperature -30.0 Â°C	9.52 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179/1eA
	2.00 J/cmÂ² @Temperature -30.0 Â°C	9.52 ft-lb/inÂ² @Temperature -22.0 Â°F	Conditioned; ISO 179/1eA
	8.50 J/cmÂ² @Temperature 23.0 Â°C	40.4 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 179/1eA
	12.0 J/cmÂ² @Temperature 23.0 Â°C	57.1 ft-lb/inÂ² @Temperature 73.4 Â°F	Conditioned; ISO 179/1eA
Puncture Energy	120 J	88.5 ft-lb	ISO 6603-2
	125 J	92.2 ft-lb	Conditioned; ISO 6603-2
	125 J @Temperature -30.0 Â°C	92.2 ft-lb @Temperature -22.0 Â°F	ISO 6603-2
	125 J @Temperature -30.0 Â°C	92.2 ft-lb @Temperature -22.0 Â°F	Conditioned; ISO 6603-2

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	150 Âµm/m-Â°C	83.3 Âµin/in-Â°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	160 Âµm/m-Â°C	88.9 Âµin/in-Â°F	ISO 11359-1/-2
Melting Point	222 Â°C	432 Â°F	10Â°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	90.0 Â°C	194 Â°F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	50.0 Â°C	122 Â°F	ISO 75-1/-2
Deflection Temperature at 8.0 MPa	40.0 Â°C	104 Â°F	ISO 75-1/-2
Vicat Softening Point	150 Â°C	302 Â°F	50Â°C/h 50N; ISO 306
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in	IEC 60695-11-10
	HB @Thickness 3.20 mm	HB @Thickness 0.126 in	IEC 60695-11-10
Oxygen Index	21 %	21 %	ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+12 ohm-cm	1.00e+12 ohm-cm	Conditioned; IEC 60093
	1.00e+15 ohm-cm	1.00e+15 ohm-cm	IEC 60093
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
Dielectric Constant	3.0 @Frequency 1.00e+6 Hz	3.0 @Frequency 1.00e+6 Hz	IEC 60250
	3.3 @Frequency 100 Hz	3.3 @Frequency 100 Hz	IEC 60250
	3.5 @Frequency 1.00e+6 Hz	3.5 @Frequency 1.00e+6 Hz	Conditioned; IEC 60250
	11 @Frequency 100 Hz	11 @Frequency 100 Hz	Conditioned; IEC 60250
Dielectric Strength	35.0 kV/mm	889 kV/in	IEC 60243-1
	35.0 kV/mm	889 kV/in	Conditioned; IEC 60243-1
Dissipation Factor	0.0070 @Frequency 100 Hz	0.0070 @Frequency 100 Hz	IEC 60250
	0.015 @Frequency 1.00e+6 Hz	0.015 @Frequency 1.00e+6 Hz	IEC 60250
	0.090 @Frequency 1.00e+6 Hz	0.090 @Frequency 1.00e+6 Hz	Conditioned; IEC 60250
	0.175 @Frequency 100 Hz	0.175 @Frequency 100 Hz	Conditioned; IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Descriptive Properties	Value	Comments
Additives	Release agent
Features	High impact or high impact modified
Form	Pellets
ISO Shortname	ISO 1874-PA 6,MPR,-020N
Processing	Injection molding
Region	Asia Pacific
	Europe
	Near East/Africa
	North America
	South and Central America

Users viewing this material also viewed the following: