- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, Unreinforced
- Kolon KOPA® KN170SA General Purpose Nylon 6
Kolon KOPA® KN170SA General Purpose Nylon 6
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced |
| Manufacturer | Kolon |
| Trade Name | Kopa® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kolon KOPA® KN170SA General Purpose Nylon 6.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
KOPA® is a thermoplastic resin with excellent mechanical, thermal and electrical properties and is widely used in automobile and industrial parts.Good mechanical properties, outstanding self-lubrication and abrasion resistance, excellent chemical resistance, wide usage temperature, good impact absorbing characteristicsInformation provided by US distributor, API-Kolon.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.14 g/cc | 0.0412 lb/in³ | DIN 53479; ASTM D792 |
| Water Absorption | 1.8 % | 1.8 % | DIN 53475; ASTM D570 |
| Linear Mold Shrinkage | 0.018 - 0.019 cm/cm | 0.018 - 0.019 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 115 | 115 | DIN 53505; ASTM D785 |
| Tensile Strength, Ultimate | 70.6 MPa | 10200 psi | DIN 53455; ASTM D638 |
| Elongation at Break | 250 % | 250 % | DIN 53455; ASTM D638 |
| Flexural Yield Strength | 49.0 MPa | 7110 psi | DIN 53455; ASTM D790 |
| Flexural Modulus | 0.883 GPa | 128 ksi | DIN 53452; ASTM D790 |
| Izod Impact, Notched | 1.96 J/cm | 3.67 ft-lb/in | DIN 53453; ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 80.0 µm/m-°C @Temperature 20.0 °C |
44.4 µin/in-°F @Temperature 68.0 °F |
DIN 53752; ASTM D696 |
| Melting Point | 220 °C | 428 °F | DIN 53736; ASTM D789 |
| Deflection Temperature at 0.46 MPa (66 psi) | 180 °C | 356 °F | DIN 53461; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 65.0 °C | 149 °F | DIN 53461; ASTM D648 |
| Flammability, UL94 | HB | HB |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 3.4 @Frequency 1e+6 Hz |
3.4 @Frequency 1e+6 Hz |
ASTM D150/DIN 53483 |
| Dielectric Strength | 20.0 kV/mm | 508 kV/in | ASTM D149/DIN 53481 |
| Arc Resistance | 120 sec | 120 sec | ASTM D495 |
Users viewing this material also viewed the following:
- Huntsman CY 179 MA Multifunctional Resin
- LG Chemical SEETEC PB150 HDPE
- Lucent Polymers TPO-30T Thermoplastic Polyolefin, 30% Mineral Filled
- Saint-Gobain CHR® 2819-3(R) Acrylic Adhesive Zone Tape
- Zircar Zirconia ALF-100 Alumina Felt Insulation
- Epoxy Technology EPO-TEK® 337H Graphite-Filled, High Temperature Epoxy
- CMW® ELKONITE® 30S Silver Tungsten contact material ASTM B631
- CENTROPLAST CENTROPEEK Polyetheretherketone
- 3M Scotch-Weld™ 847-L Nitrile High Performance Rubber & Gasket Adhesive
Copyright © lookpolymers.com All Rights Reserved