- HOME
- POLYMER SEARCH
- Thermoplastic
- Polycarbonate (PC)
- Polycarbonate, Impact Modified
- Kingfa PC-S923 Modified PC
Kingfa PC-S923 Modified PC
| Category | Polymer , Thermoplastic , Polycarbonate (PC) , Polycarbonate, Impact Modified |
| Manufacturer | Kingfa Sci. & Tech. Co. |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kingfa PC-S923 Modified PC.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Features:Excellent balance propertiesGood weather resistanceHigh impact strengthGood electro-plating propertiesGood processing propertiesApplications:Injection moldingAutomobile instrument panelElectrical and electronic partsComputer and accessoriesHousehold appliance thin wall partsInformation Provided by Kingfa Sci. & Tech. Co., Ltd.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.19 g/cc @Temperature 23.0 °C |
1.19 g/cc @Temperature 73.4 °F |
ASTM D792 |
| Linear Mold Shrinkage | 0.0050 - 0.0070 cm/cm @Temperature 23.0 °C |
0.0050 - 0.0070 in/in @Temperature 73.4 °F |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 118 | 118 | ASTM D785 |
| Tensile Strength at Break | 61.0 MPa | 8850 psi | 50mm/min; ASTM D638 |
| Elongation at Break | >= 90 % | >= 90 % | 50mm/min; ASTM D638 |
| Flexural Strength | 85.0 MPa | 12300 psi | 2mm/min; ASTM D790 |
| Flexural Modulus | 2.40 GPa | 348 ksi | 2mm/min; ASTM D790 |
| Izod Impact, Notched | 6.10 J/cm @Thickness 3.20 mm, Temperature 23.0 °C |
11.4 ft-lb/in @Thickness 0.126 in, Temperature 73.4 °F |
ASTM D256 |
| Izod Impact, Unnotched | NB @Thickness 3.20 mm, Temperature 23.0 °C |
NB @Thickness 0.126 in, Temperature 73.4 °F |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 132 °C @Thickness 6.40 mm |
270 °F @Thickness 0.252 in |
ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 128 °C @Thickness 6.40 mm |
262 °F @Thickness 0.252 in |
ASTM D648 |
| Flammability, UL94 | V-2 @Thickness 1.60 mm |
V-2 @Thickness 0.0630 in |
|
| V-2 @Thickness 3.20 mm |
V-2 @Thickness 0.126 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D257 |
| Surface Resistance | 1.00e+15 ohm | 1.00e+15 ohm | ASTM D257 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | <= 300 °C | <= 572 °F | |
| Rear Barrel Temperature | 230 - 270 °C | 446 - 518 °F | Start Point: 250°C |
| Middle Barrel Temperature | 235 - 280 °C | 455 - 536 °F | Start Point: 260°C |
| Front Barrel Temperature | 240 - 290 °C | 464 - 554 °F | Start Point: 270°C |
| Melt Temperature | 240 - 280 °C | 464 - 536 °F | Start Point: 250°C |
| Mold Temperature | 60.0 - 80.0 °C | 140 - 176 °F | Start Point: 70°C |
| Drying Temperature | 110 °C @Time 14400 - 21600 sec |
230 °F @Time 4.00 - 6.00 hour |
Pre-dry |
| Back Pressure | 0.300 - 1.00 MPa | 43.5 - 145 psi |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Injection Speed | 60-90% | |
| Weather Resistance (delta E) | ASTM D4459; 300hr xenon lamp |
Users viewing this material also viewed the following:
- Techmer ES HiFill® PA6 GF40 L 40% Milled Glass
- Silberline Aquasil® "BP" 205
- Hexcel® HexPly® EF02 Epoxy Curing System after THR 120 EF01 S50 37% Curing Cycle
- A. Schulman POLYBATCH™ Blue LL40434 Concentrate Based In LLDPE
- Zeon Chemicals Nipol® 1072x28 Carboxylated Nitrile Elastomer
- Zircar Refractory Composites ASPA-2 Alumina-Silica Fiber Paper
- American Elements Carbon Nanoparticles
- ExxonMobil PP5032E3 Polypropylene Copolymer
- Arlon Thermabond® 48991A015 0.015" (0.381 mm) Uncured Silicone Rubber with Fiberglass Substrate
Copyright © lookpolymers.com All Rights Reserved