Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
SABIC Innovative Plastics Lexan® 955A PC (Asia Pacific) Lexan* 955A Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating. Lexan 955A resin is available in tran.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
Polymer Resources PC-IM1 Polycarbonate, Impact Modified, Low Flow Polycarbonate, Impact Modified, Low FlowProcess: Molding or ExtrusionNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided .. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
SABIC Innovative Plastics Lexan® HPS4 PC Medium flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI).EtO, steam, e-beam, and gamma sterilizable... |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
SABIC Innovative Plastics Lexan® HPX8REU PC Copolymer (Europe-Africa-Middle East) Very high flow specialty polycarbonate with outstanding processability and ductility. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 o.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
SABIC Innovative Plastics Lexan® LUX7636C PC COPOLYMER (Europe-Africa-Middle East) Lexan* LUX7636C Polycarbonate (PC) resin is a non-filled, extrudable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating at 1.0 mm / 5VA rating at 3.0mm and is U.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
SABIC Innovative Plastics Lexan® ML7664 PC Copolymer (Asia Pacific) Lexan* ML7664 polycarbonate (PC) siloxane resin, is a product targeting (profile) extrusion applications requiring extreme low temperature ductility. Lexan* ML7664 resin is a non-FR product availabl.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
SABIC Innovative Plastics Lexan® 945A PC Lexan* 945A Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating and is available in transparent and ti.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D 792 |
SABIC Innovative Plastics Lexan® EXL1112T PC Copolymer (Europe-Africa-Middle East) Lexan* EXL1112T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding (IM) grade. This resin offers good low temperature (-20 C) ductility in combination with high flow char.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 20 PHR Atomite Whiting Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ISO 1183 |
Lehmann & Voss LUVOTECH® GS 46 Polyamide 46, lubricant modified, heat stabilized Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Emergency running property.Isotropic shrinkage characteristics.Highly dimensionally stable at e.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | DIN 53479 |
Isoflon PMMA Polymethyl-methacrylate Products with good mechanical performances under friction and good dimensional stability, notably in moist environmentsVery rigid, hardHigh machining precisionInformation provided by Isoflon. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | |
Silberline SilBerCote® 1703-20Z SilBerCote® Z polymer treated aluminum pigments are resistant to acid and alkali staining, while providing enhanced electrical charge resistance in finished coatings. Product is typically formula.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | 23°C; ASTM D792 |
Teknor Apex Flexalloy® 3501-75-NT Polyvinyl Chloride Elastomer Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTM Features: Ultra High MW, Ethylene Oxide SterilizableForms-PelletsProcessing-Extrusion, Injection MoldingAppe.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
SABIC Innovative Plastics XYLEX X7519HP PC+POLYESTER Good Chemical Resistance, XYLEX grade with good dishwasher performance, USA/Europe Food Contact Comment: While molding of thicker parts, cooling speed has an influence of transparency. Thicker parts.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
SABIC Innovative Plastics XYLEX X7519HP PC+POLYESTER (Asia Pacific) Good Chemical Resistance, XYLEX grade with good dishwasher performance, USA/Europe Food Contact Comment: While molding of thicker parts, cooling speed has an influence of transparency. Thicker parts.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
Sumitomo Chemical Sumipex® LG35 Acrylic Resin, High Flow Product CharacteristicsHigh FlowImproved Cycle TimeInformation provided by Calsak Corporation |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
Sumitomo Chemical Sumipex® MH Acrylic Resin, Heat Resistant Product CharacteristicsExtrusion GradeHeat ResistantInformation provided by Calsak Corporation |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
Teknor Apex Telcar® TL-89-P808A Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets .. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
A. Schulman POLYPUR™ FPU 1117 Thermoplastic Polyurethane Compound Information provided by A. Schulman. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | DIN 53479 |
Lubrizol ESTANE® 58271 Ester Based Thermoplastic Polyurethane (European Grade) Description: Estane® thermoplastic polyurethanes (TPUs) include elastomeric materials that bridge the gap between flexible rubber and rigid plastics. These materials offer toughness and durability .. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
Eastman DuraStar MN631 Polymer, Natural Durastar Polymer MN631 contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing char.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | |
Momentive Performance Materials TUFEL™ II 94606 Low Volatile Extrusion Heat Cured Rubber Heat cured rubber is a high consistency product that can be molded, extruded or calendered using conventional rubber processing equipment to meet a wide range of cost, durability and performance sta.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
Eastman Tenite 550E3V45510 Butyrate Water Clear, Trsp
(discontinued **) Tenite cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite cellulosi.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | DIN 53479 |
Lubrizol ESTANE® 58244 Ether Based Thermoplastic Polyurethane (European Grade) Description: Estane® thermoplastic polyurethanes (TPUs) include elastomeric materials that bridge the gap between flexible rubber and rigid plastics. These materials offer toughness and durability .. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
PolyOne Lubri-Tech™ MP-10GF/10T Modified Polyphenylene Oxide (mPPO), Glass Filled, PTFE Lubricated
(discontin Description/Features:Glass Fiber ReinforcedPTFE LubricatedUL 94 HB (HEM TEST)PolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ISO 2781 |
Lubrizol Advanced Materials Pearlstick® 45-50/29 Linear Thermoplastic Polyurethane Elastomer Pearlstick 45-50/29 is an elastic, linear, aromatic polyurethane with an extremely high crystallization rate and a medium-low thermoplasticity level, available as pellets.Solubility: Pearlstick 45-.. |
|||
Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
Samsung Cheil Industries Infino® CF-1030 PC, Unreinforced High Impact Information provided by Samsung Cheil Industries. |