- HOME
- POLYMER SEARCH
- Thermoplastic
- ABS Polymer
- Acrylonitrile Butadiene Styrene (ABS), Molded
- Ineos ABS Lustran® Elite HH 1891
Ineos ABS Lustran® Elite HH 1891
| Category | Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Molded |
| Manufacturer | Ineos ABS |
| Trade Name | Lustran® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Ineos ABS Lustran® Elite HH 1891.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Key Features:UnfilledHeat stabilized or stable to heatSuitable processing methods:Injection molding
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.05 g/cc | 0.0379 lb/in³ | |
| Melt Flow | 7.2 g/10 min @Load 10.0 kg, Temperature 220 °C |
7.2 g/10 min @Load 22.0 lb, Temperature 428 °F |
cm³/10 min. |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 42.9 MPa | 6220 psi | |
| Elongation at Break | 35 % | 35 % | Nominal |
| Elongation at Yield | 4.0 % | 4.0 % | |
| Tensile Modulus | 2.05 GPa | 297 ksi | |
| Charpy Impact, Notched | 2.00 J/cm² | 9.52 ft-lb/in² | |
| 0.590 J/cm² @Temperature -30.0 °C |
2.81 ft-lb/in² @Temperature -22.0 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 79.0 µm/m-°C @Temperature 20.0 °C |
43.9 µin/in-°F @Temperature 68.0 °F |
|
| Deflection Temperature at 0.46 MPa (66 psi) | 101 °C | 214 °F | |
| Deflection Temperature at 1.8 MPa (264 psi) | 86.0 °C | 187 °F | |
| Vicat Softening Point | 106 °C | 223 °F | 50°C/h 50N |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 250 °C | 482 °F | Injection Molding |
| Mold Temperature | 60.0 °C | 140 °F | Injection Molding |
| Injection Velocity | 200 mm/sec | 7.87 in/sec | |
| Injection Pressure | 55.0 MPa | 7980 psi |
Users viewing this material also viewed the following:
- Kolon KOPA® KN333G45 G/F Reinforced Nylon 66
- Samsung Cheil Industries Infino® HP-1000XA PC/ABS, Unreinforced
- Wellman Wellamid® GF1398-BK1 Nylon 66, 30% Glass Fiber Reinforced
- ThyssenKrupp SECURE 400 Structural Steel
- A. Schulman POLYBATCH™ UVK-90 UV Stabilizer Concentrate Based In Polyethylene
- TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 1.0 PHR MBT
- ChevronTexaco Superla® 5 White Oil
- BLUESTAR 403G-MG30 PBT, 30% Glass Filled
- SABIC Innovative Plastics LNP Thermotuf PF003IX1 PA 6 (Europe-Africa-Middle East)
Copyright © lookpolymers.com All Rights Reserved