Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Ineos ABS Centrex® 401 AES Extrusion  (discontinued **)

Category Polymer , Thermoplastic , AES Polymer , AES, Extruded
Manufacturer
Trade Name
Port Shanghai port,China
Trade Terms EXW, FOB, CFR, CIF
Payment Terms L/C, T/T, PayPal
Download PDF Ineos ABS Centrex® 401 AES Extrusion  (discontinued **).pdf
Price EMAIL US    sales@lookpolymers.com
Material Notes:
Properties tested in transverse direction (worst case) on 125-mil (3.2 mm) extruded sheets specimens with
Physical Properties Metric English Comments
Density 1.01 g/cc
0.0365 lb/in³
ASTM D792
Melt Flow 5.6 g/10 min
<br>@Load 10.0 kg,<br> Temperature 230 °C
 5.6 g/10 min
<br>@Load 22.0 lb,<br> Temperature 446 °F
 ASTM D1238
Mechanical Properties Metric English Comments
Hardness, Rockwell R 91
91
ASTM D785
Tensile Strength, Ultimate 24.0 MPa
3480 psi
ASTM D638
Tensile Strength, Yield 29.0 MPa
4210 psi
ASTM D638
Tensile Modulus 1.70 GPa
247 ksi
ASTM D638
Flexural Yield Strength 42.1 MPa
6110 psi
ASTM D790
Flexural Modulus 1.50 GPa
218 ksi
ASTM D790
Izod Impact, Notched 0.910 J/cm
<br>@Temperature -40.0 °C
 1.70 ft-lb/in
<br>@Temperature -40.0 °F
 ASTM D256
5.90 J/cm
<br>@Thickness 3.17 mm
 11.1 ft-lb/in
<br>@Thickness 0.125 in
 ASTM D256
Impact Test 35.0 J
<br>@Thickness 3.20 mm
 25.8 ft-lb
<br>@Thickness 0.126 in
 Instrumented Impact, Total Energy; 3.2 mm thick, 7.6 mph, 3 in. clamp, 0.5 in. dart; ASTM D3763
Thermal Properties Metric English Comments
CTE, linear 79.0 µm/m-°C
<br>@Temperature 20.0 °C
 43.9 µin/in-°F
<br>@Temperature 68.0 °F
 ASTM D696
Deflection Temperature at 1.8 MPa (264 psi) 79.0 °C
<br>@Thickness 3.17 mm
 174 °F
<br>@Thickness 0.125 in
 Unannealed; ASTM D648
UL RTI, Electrical 50.0 °C
<br>@Thickness 1.60 mm
 122 °F
<br>@Thickness 0.0630 in
 UL746B
UL RTI, Mechanical with Impact 50.0 °C
<br>@Thickness 1.60 mm
 122 °F
<br>@Thickness 0.0630 in
 UL746B
UL RTI, Mechanical without Impact 50.0 °C
<br>@Thickness 1.60 mm
 122 °F
<br>@Thickness 0.0630 in
 UL746B
Flammability, UL94 HB
<br>@Thickness 1.43 mm
 HB
<br>@Thickness 0.0563 in
HB
<br>@Thickness 1.43 mm
 HB
<br>@Thickness 0.0563 in
Optical Properties Metric English Comments
Gloss 45 %
45 %
60°; Formed; ASTM D523
75 %
75 %
60°; Sheet; ASTM D523
Transmission, Visible 0.00 %
0.00 %
Opaque only
Electrical Properties Metric English Comments
Arc Resistance 60 - 120 sec
<br>@Thickness 3.35 mm
 60 - 120 sec
<br>@Thickness 0.132 in
 UL Rating PLC 6 (60-120 sec)
Comparative Tracking Index >= 600 V
<br>@Thickness 3.35 mm
 >= 600 V
<br>@Thickness 0.132 in
 UL Rating PLC 0 (&gt;600 V)
Hot Wire Ignition, HWI 15 - 30 sec
<br>@Thickness 3.35 mm
 15 - 30 sec
<br>@Thickness 0.132 in
 UL Rating PLC 3 (15-30 sec)
High Amp Arc Ignition, HAI >= 120 arcs
<br>@Thickness 1.43 mm
 >= 120 arcs
<br>@Thickness 0.0563 in
 UL Rating PLC 0 (&gt;120 arcs)
High Voltage Arc-Tracking Rate, HVTR 10.0 - 25.4 mm/min
<br>@Thickness 1.43 mm
 0.394 - 1.00 in/min
<br>@Thickness 0.0563 in
 UL Rating PLC 1 (10-25.4 mm/min.)
Processing Properties Metric English Comments
Melt Temperature 204 - 243 °C
399 - 469 °F
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved