- HOME
- POLYMER SEARCH
- Thermoplastic
- ABS Polymer
- Ecomass® 720ZD88 Tungsten Filled ABS
Ecomass® 720ZD88 Tungsten Filled ABS
| Category | Polymer , Thermoplastic , ABS Polymer |
| Manufacturer | Ecomass Technologies |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Ecomass® 720ZD88 Tungsten Filled ABS.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
High Specific GravityTungsten Powder Filled ABSGood ToughnessPlateableInformation provided by Technical Polymers
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 6.00 g/cc | 6.00 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.0020 cm/cm | 0.0020 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 17.2 MPa | 2500 psi | ASTM D638 |
| Elongation at Break | 1.1 % | 1.1 % | ASTM D638 |
| Flexural Modulus | 8.62 GPa | 1250 ksi | ASTM D790 |
| Izod Impact, Notched | 0.534 J/cm | 1.00 ft-lb/in | ASTM D256 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 204 - 249 °C | 400 - 480 °F | |
| Mold Temperature | 26.7 - 48.9 °C | 80.0 - 120 °F | |
| Drying Temperature | 71.1 - 82.2 °C | 160 - 180 °F | |
| Dry Time | 2 - 4 hour | 2 - 4 hour |
Users viewing this material also viewed the following:
- Omni Plastics OmniTech™ PA6/6 GR15 MS2 Wear-and-Friction Molybdenum Disulfide filled Nylon
- Radici Radilon® S 38M (cond.) Nylon 6
- Techmer ES Luriblend® HDPE TL10
- Total PPH 3825 Polypropylene, Injection Molding Grade
- ChevronTexaco Texcool® EXL 304
- Arlon R3792-920-10R##-P0 Silicone Rubber
- DSM Stanyl® TS200B3 PA46-CF15
Copyright © lookpolymers.com All Rights Reserved