POLYMER SEARCH

EMS-Grivory Grivory® TSM-40/4 PA666-MD40

Category	Polymer , Thermoplastic , Nylon , Nylon 6/66 , Nylon 66/6, Mineral Reinforced
Manufacturer	EMS-Grivory (EMS-CHEMIE)
Trade Name	Grivory®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	EMS-Grivory Grivory® TSM-40/4 PA666-MD40.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Product description: Grilon TSM-40/4 is a special heat stabilized, normal viscosity PA66 + PA6 injection molding grade with 40% mineral filler. Grilon TSM-40/4 has the following important properties: Excellent flow behaviorGood surface finishLow warpageEasy processing Application examples are injection molding parts which demand a good surface finish such as engine covers, fuel tank flaps, and wheel caps.Information provided by EMS Grivory

Physical Properties	Metric	English	Comments
Density	1.46 g/cc	0.0527 lb/in³	ISO 1183
Water Absorption	6.0 %	6.0 %	ISO 62
Moisture Absorption	2.00 %	2.00 %	ISO 62
Linear Mold Shrinkage, Flow	0.011 cm/cm	0.011 in/in	ISO 294-4, 2577
Linear Mold Shrinkage, Transverse	0.011 cm/cm	0.011 in/in	ISO 294-4, 2577

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	65.0 MPa	9430 psi	conditioned; ISO 527-1/-2
	90.0 MPa	13100 psi	dry; ISO 527-1/-2
Elongation at Break	7.0 %	7.0 %	dry; ISO 527-1/-2
	22 %	22 %	conditioned; ISO 527-1/-2
Tensile Modulus	3.80 GPa	551 ksi	conditioned; ISO 527-1/-2
	6.00 GPa	870 ksi	dry; ISO 527-1/-2
Charpy Impact Unnotched	8.00 J/cm²	38.1 ft-lb/in²	dry; ISO 179/1eU
	15.0 J/cm²	71.4 ft-lb/in²	conditioned; ISO 179/1eU
Charpy Impact, Notched	0.400 J/cm²	1.90 ft-lb/in²	dry; ISO 179/1eA
	0.500 J/cm²	2.38 ft-lb/in²	conditioned; ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	70.0 µm/m-°C	38.9 µin/in-°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	70.0 µm/m-°C	38.9 µin/in-°F	ISO 11359-1/-2
Melting Point	260 °C	500 °F	10°C/min; ISO 11357-1/-3
Maximum Service Temperature, Air	100 - 120 °C	212 - 248 °F	long term; EMS
	180 °C	356 °F	short term; EMS
Deflection Temperature at 1.8 MPa (264 psi)	110 °C	230 °F	ISO 75-1/-2
Flammability, UL94	HB	HB	IEC 60695-11-10

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+12 ohm-cm	1.00e+12 ohm-cm	conditioned; IEC 60093
	1.00e+13 ohm-cm	1.00e+13 ohm-cm	dry; IEC 60093
Surface Resistance	1.00e+11 ohm	1.00e+11 ohm	IEC 60093

Descriptive Properties	Value	Comments
Form	Granules
Processing	Injection Molding

Users viewing this material also viewed the following: