- HOME
- POLYMER SEARCH
- Polymer Property : Charpy Impact, Notched = 0.500 J/cm²
Polymer Property : Charpy Impact, Notched = 0.500 J/cm² Product List
Mechanical PropertiesTips: 30 items are displayed at most.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Charpy Impact, Notched |
0.500
J/cm² @Temperature 23.0 °C |
2.38
ft-lb/in² @Temperature 73.4 °F |
|
|
Plastcom SLOVALEN PH 51 N PP, basic type
FeaturesModified homopolymer PP for injection moulding. General use in all industry branches - packing material, garden flowerpots, toys, furniture industry, hinges, fasteners, clamps, office chairs..
|
|||
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | Edgew 80*10*3 sp=62mm; ISO 179/1eA |
|
SABIC Innovative Plastics Lexan® ML7686 PC (Europe-Africa-Middle East)
Transparent Polycarbonate in limited colors. Excellent processability, super high flow. UL rated V-2 at 1.5mm.
|
|||
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | Edgew 80*10*3 sp=62mm; ISO 179/1eA |
|
SABIC Innovative Plastics Lexan® ML7686E PC (Europe-Africa-Middle East)
Transparent Polycarbonate in natural color. Excellent processability, super high flow. UL compliant 94V-2 at 1.5mm.
|
|||
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | ISO 179 |
|
Nilit Polynil® P50FL Externally Lubricated, Lightly Nucleated Nylon 66
Description: Polynil P50FL is a general purpose injection molding grade that is widely used for gears, bearings, fasteners, clips.Key characteristics: Excellent flowGood toughnessGood overall mechan..
|
|||
| Charpy Impact, Notched |
0.500
J/cm² @Temperature -40.0 °C |
2.38
ft-lb/in² @Temperature -40.0 °F |
DIN 53453 |
|
Nilit FRIANYL B63 CV30 Nylon 6.6 for injection molding, 30% carbon fiber reinforced
Nylon 6.6 for injection molding, good conductive and electrostatic properties.Information provided by Frisetta Polymer, which merged into Nilit Plastics
|
|||
| Charpy Impact, Notched |
0.500
J/cm² @Temperature -30.0 °C |
2.38
ft-lb/in² @Temperature -22.0 °F |
Edgew 80*10*3 sp=62mm; ISO 179/1eA |
|
SABIC Innovative Plastics Lexan® DMX1132 PC Copolymer (Asia Pacific)
Lexan* DMX1132 is a high flow polycarbonate copolymer resin with improved ammonia resistance over regular polycarbonate resin.
|
|||
| Charpy Impact, Notched | 0.500 - 0.700 J/cm² | 2.38 - 3.33 ft-lb/in² | Injection; ISO 179/1eA |
|
Raschig Group RESINOL® 87120 EPF Phenolic
Glass-fiber reinforced phenolic molding compound. Excellent heat resistance, low mould shrinkage and post-shrinkage, good chemical resistance and very good mechanical properties. This product meets ..
|
|||
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | |
|
Akro-Plastic Akromid® A28 1 S3 PA, Dry-Impact Resistant
(discontinued **)
The product types are mainly used in the automobile industry sector, but also for the domestic industry, the building industry and the leisure time-and sporting goods industry, AKROMID has become a ..
|
|||
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | |
|
LATI Latigray 82-04 CX/90 PA 12
Radiopaque compound based on Polyamide 12 (PA12). Special mineral filler. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industria..
|
|||
| Charpy Impact, Notched |
0.500
J/cm² @Temperature -30.0 °C |
2.38
ft-lb/in² @Temperature -22.0 °F |
Edgew 80*10*4 sp=62mm; ISO 179/1eA |
|
SABIC Innovative Plastics NORYL V0150B PPE+HIPS (Asia Pacific)
Noryl* V0150B is an unfilled, injection moldable modified polyphenylene ether resin.. Designed for high heat resistance and thin wall FR performance, this resin delivers a UL94 V0 rating at 1.5 mm a..
|
|||
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | Edgew 80*10*4 sp=62mm; ISO 179/1eA |
|
SABIC Innovative Plastics ULTEM HU1110 PEI (Asia Pacific)
Enhanced flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), food contac..
|
|||
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | Edgew 80*10*4 sp=62mm; ISO 179/1eA |
|
SABIC Innovative Plastics Valox® VX3101N PBT (Europe-Africa-Middle East)
VALOX VX3101N is an unreinforced PBT injection moulding resin, with excellent flow properties, good hydrolitical stability and chemical resistance.
|
|||
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | ISO 179 |
|
SIDPEC EGYPTENE® HD 5218 EA HDPE Injection Molding
Applications:House waresThin-walled food containersPET bottle base cupInformation provided by Interchim s.r.l., official distributor of Sidi Kerir Petrochemicals Co. (SIDPEC) Products
|
|||
| Charpy Impact, Notched |
0.500
J/cm² @Temperature 23.0 °C |
2.38
ft-lb/in² @Temperature 73.4 °F |
V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA |
|
SABIC Innovative Plastics Noryl FXN2090H PPE+HIPS
Noryl* FXN2090H resin is an unfilled, injection moldable grade. Designed for exceptionally high gloss and improved pencil hardness vs. standard Noryl grades, FXN2090H resin uses non-halogenated FR a..
|
|||
| Charpy Impact, Notched |
0.500
J/cm² @Temperature -20.0 °C |
2.38
ft-lb/in² @Temperature -4.00 °F |
ISO 179 |
|
Total PPC 7650 Polypropylene, Heterophasic Copolymer
ATOFINA Propylene 7650 is a nucleated and antistatic heterophasic copolymer. PPC 7642 is characterized by a medium fluidity offering a combination of ease of processing and excellent impact propert..
|
|||
| Charpy Impact, Notched |
0.500
J/cm² @Temperature 30.0 °C |
2.38
ft-lb/in² @Temperature 86.0 °F |
dry; ISO 179/1eU |
|
EMS-Grivory Grivory® HT2V-15H PA6T/66-GF15
Product description: Grivory HT2V-15H is a 15 % glass fiber reinforced engineering thermoplastic material based on a semi-crystalline, partially aromatic copolyamide. Polymer designation acc. to ISO..
|
|||
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | dry; ISO 179/1eA |
|
EMS-Grivory Grivory® TSS/4 PA666
Product description: Grilon TSS/4 is an unreinforced, heat stabilized, normal viscosity PA66 + PA6 injection molding grade. Grilon TSS/4 has the following important properties: Good flow behaviorEas..
|
|||
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | dry; ISO 179/1eA |
|
EMS-Grivory Grivory® XE 4185 black 9453 PA*
Product description: Grivory XE 4185 is a non-reinforced heat stabilized engineering thermoplastic material based on a semicrystalline, partially aromatic copolyamide. ISO polymer designation: PA 10..
|
|||
| Charpy Impact, Notched |
0.500
J/cm² @Temperature -30.0 °C |
2.38
ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eA |
|
DuPont Performance Polymers Delrin® 510GR NC000 Acetal (POM)
(Unverified Data**)
10% Glass Reinforced Medium Viscosity Acetal Homopolymer Delrin 510GR is a 10% glass reinforced acetal homopolymer for injection molding. It has high strength stiffness and high deflection temperatu..
|
|||
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | 1eA; ISO 179 |
|
Azoty Tarnow™ TARNOFORM 300 TF2 POM
Tribological modified grade with addition of 10% PTFE, which causes decreased coefficient of friction and wear.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A.
|
|||
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | 1eA; ISO 179 |
|
Azoty Tarnow™ TARNOFORM 500 POM
Easy flowing grade for injection molding of thin-walled parts or in case of long flow path.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A.
|
|||
| Charpy Impact, Notched |
0.500
J/cm² @Temperature -30.0 °C |
2.38
ft-lb/in² @Temperature -22.0 °F |
ISO 179 |
|
BASF Ultramid® 7423-2 NF3001 13% Glass Filled PA66 (Dry)
Ultramid 7423-2 NF3001 is an impact modified, 13% glass reinforced, heat stabilized injection molding PA6/6.
|
|||
| Charpy Impact, Notched |
0.500
J/cm² @Temperature 23.0 °C |
2.38
ft-lb/in² @Temperature 73.4 °F |
STN EN ISO 179 |
|
Plastcom SLOVALEN PH 91 N Polypropylene Homopolymer
FeaturesModified homopolymer PP for injection moulding. General use in all industry branches - packing material, garden flower-pots, toys, furniture industry, hinges, fasteners, clamps, office chai..
|
|||
| Charpy Impact, Notched |
0.500
J/cm² @Temperature -30.0 °C |
2.38
ft-lb/in² @Temperature -22.0 °F |
Edgew 80*10*4 sp=62mm; ISO 179/1eA |
|
SABIC Innovative Plastics NORYL PX2060 PPE+PS (Europe-Africa-Middle East)
Noryl* PX2060 is an unfilled, injection moldable modified polyphenylene ether resin. Designed for good dimensional stability and high flow , this resin also uses non-chlorinated, non-brominated FR ..
|
|||
| Charpy Impact, Notched |
0.500
J/cm² @Temperature 23.0 °C |
2.38
ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
|
DuPont Performance Polymers Sorona® 3301 BK001 Polytrimethylene Terephthalate (PTT)
(Unverified Data**)&l
Sorona® 3301 BK001 is an unreinforced black polytrimethylene terephthalate resin containing 35% renewably sourced ingredients by weight with superior surface appearance in ambient temperature condi..
|
|||
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | ISO 179/IeA |
|
Addiplast Addilene H 552 Y7 Polypropylene Homopolymer
Good surface appearance, high temperature resistanceInformation provided by Addiplast.
|
|||
| Charpy Impact, Notched |
0.500
J/cm² @Temperature 23.0 °C |
2.38
ft-lb/in² @Temperature 73.4 °F |
V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA |
|
SABIC Innovative Plastics Valox® VX4915 ASA+PBT (Europe-Africa-Middle East)
15% Glass reinforced nucleated PBT/ASA with excellent mechanical properties high dimensional stability, and low density.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
|
|||
Copyright © lookpolymers.com All Rights Reserved