- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6/66
- Nylon 66/6, 40% Glass Fiber Reinforced
- EMS-Grivory Grivory® TSG-50 FA PA666-GF50
EMS-Grivory Grivory® TSG-50 FA PA666-GF50
| Category | Polymer , Thermoplastic , Nylon , Nylon 6/66 , Nylon 66/6, 40% Glass Fiber Reinforced |
| Manufacturer | EMS-Grivory (EMS-CHEMIE) |
| Trade Name | Grivory® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | EMS-Grivory Grivory® TSG-50 FA PA666-GF50.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by EMS Grivory
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.56 g/cc | 0.0564 lb/in³ | ISO 1183 |
| Water Absorption | 6.0 % | 6.0 % | ISO 62 |
| Moisture Absorption | 1.50 % | 1.50 % | ISO 62 |
| Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4, 2577 |
| Linear Mold Shrinkage, Transverse | 0.0030 cm/cm | 0.0030 in/in | ISO 294-4, 2577 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Ball Indentation Hardness | 160 MPa | 23200 psi | conditioned; ISO 2039-1 |
| 270 MPa | 39200 psi | dry; ISO 2039-1 | |
| Tensile Strength at Break | 150 MPa | 21800 psi | conditioned; ISO 527-1/-2 |
| 240 MPa | 34800 psi | dry; ISO 527-1/-2 | |
| Tensile Strength, Yield | 150 MPa | 21800 psi | conditioned; ISO 527-1/-2 |
| Elongation at Break | 3.0 % | 3.0 % | dry; ISO 527-1/-2 |
| 5.0 % | 5.0 % | conditioned; ISO 527-1/-2 | |
| Elongation at Yield | 5.0 % | 5.0 % | conditioned; ISO 527-1/-2 |
| Tensile Modulus | 10.0 GPa | 1450 ksi | conditioned; ISO 527-1/-2 |
| 16.5 GPa | 2390 ksi | dry; ISO 527-1/-2 | |
| Charpy Impact Unnotched | 9.00 J/cm² | 42.8 ft-lb/in² | dry; ISO 179/1eU |
| 10.0 J/cm² | 47.6 ft-lb/in² | conditioned; ISO 179/1eU | |
| 8.00 J/cm² @Temperature 30.0 °C |
38.1 ft-lb/in² @Temperature 86.0 °F |
dry; ISO 179/1eU | |
| 9.00 J/cm² @Temperature 30.0 °C |
42.8 ft-lb/in² @Temperature 86.0 °F |
conditioned; ISO 179/1eU | |
| Charpy Impact, Notched | 1.50 J/cm² | 7.14 ft-lb/in² | dry; ISO 179/1eA |
| 2.00 J/cm² | 9.52 ft-lb/in² | conditioned; ISO 179/1eA | |
| 1.10 J/cm² @Temperature 30.0 °C |
5.23 ft-lb/in² @Temperature 86.0 °F |
dry; ISO 179/1eU | |
| 1.20 J/cm² @Temperature 30.0 °C |
5.71 ft-lb/in² @Temperature 86.0 °F |
conditioned; ISO 179/1eU |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 15.0 µm/m-°C | 8.33 µin/in-°F | ISO 11359-1/-2 |
| CTE, linear, Transverse to Flow | 100 µm/m-°C | 55.6 µin/in-°F | ISO 11359-1/-2 |
| Melting Point | 260 °C | 500 °F | 10°C/min; ISO 11357-1/-3 |
| Maximum Service Temperature, Air | 90.0 - 120 °C | 194 - 248 °F | long term; EMS |
| 180 °C | 356 °F | short term; EMS | |
| Deflection Temperature at 1.8 MPa (264 psi) | 220 °C | 428 °F | ISO 75-1/-2 |
| Deflection Temperature at 8.0 MPa | 165 °C | 329 °F | ISO 75-1/-2 |
| Flammability, UL94 | HB | HB | IEC 60695-11-10 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | conditioned; IEC 60093 |
| 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | dry; IEC 60093 | |
| Surface Resistance | 1.00e+10 ohm | 1.00e+10 ohm | IEC 60093 |
| Dielectric Strength | 31.0 kV/mm | 787 kV/in | dry; IEC 60243-1 |
| 31.0 kV/mm | 787 kV/in | conditioned; IEC 60243-1 | |
| Comparative Tracking Index | 600 V | 600 V | dry; IEC 60112 |
| 600 V | 600 V | conditioned; IEC 60112 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Food contact | EU Requirements | |
| FDA | ||
| Form | Granules | |
| Industry & Consumer goods | Housewares | |
| Sports & Leisure | ||
| Packaging | Medical packaging | |
| Processing | Injection Molding |
Users viewing this material also viewed the following:
- Premix Thermoplastics PRE-ELEC® ESD 6010 Dissipative Masterbatch, IDP Additive
- Reltek BONDiT™ HM-502 Coating, Sealant, Adhesive System
- Michelman® Michem® Lube 188F Anionic carnauba/paraffin wax emulsion
- A. Schulman POLYFORT™ PP 3720
- Hexcel® HexWeb® HRH-10 - 1/8- 8.0 Aramid Fiber/Phenolic Resin Honeycomb
- ConocoPhillips Syncon® 220 Synthetic EP Gear Oil, AGMA No. 5EP
- Covestro Bayfill® EA 4004 Polyurethane Energy-Absorbing Semi-Rigid Foam, Rigid Grade, MDI-based 2-Component Liquid System
- ChevronTexaco ISO 100 Utility Oil LVI
- Cast Nylons Nycast® RX Solid Lubricant Filled Red Cast Nylon 6
- Wellman Wellamid® 22LH-WBK Unfilled Nylon 66
Copyright © lookpolymers.com All Rights Reserved