Polymer Property : Tensile Strength at Break = 150 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	150 MPa	21800 psi	ISO 527
Nilit FRIANYL B63 TF-GV 1530 Nylon 6 for injection molding, 15% PTFE lubricated, 30% glass fiber reinforced Nylon 6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Tensile Strength at Break	<= 150 MPa	<= 21800 psi	ISO/R527
Polykemi AB SCANAMID 66 A33^E F45 Nylon 66, Glass Fiber Reinforced, Elastomer Modified Information provided by Polykemi AB
Tensile Strength at Break	150 MPa	21800 psi	50 mm/min; ISO 527-1,2
Qualchem Danamid FGFH-30 Polyamide 6, 30% Glass Fiber Reinforced with glass fiber. Heat stabilized, for long-lasting use at 120-140°C.Information provided by Qualchem Zrt.
Tensile Strength at Break	150 MPa @Temperature 23.0 °C	21800 psi @Temperature 73.4 °F	ISO 527-2/5
PolyOne Bergamid™ B65 G30 black IG Polyamide 6 (Nylon 6) Information provided by PolyOne
Tensile Strength at Break	150 MPa	21800 psi	ASTM D638
LNP Thermocomp® LF-1004 Polyetheretherketone, Glass Fiber Reinforcement (discontinued **) Forms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are still active under new names..
Tensile Strength at Break	150 MPa	21800 psi	ISO 527
Nilit FRIANYL B63 HS-GV35 Nylon 6 for injection molding, 35% glass fiber reinforced Nylon 6 for injection molding, high impact modified.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Tensile Strength at Break	150 MPa	21800 psi	ASTM D683
Loxim 330 01V0 Nylon 6 Information provided by Loxim Industries
Tensile Strength at Break	150 MPa	21800 psi	ISO 527-1/-2
Lanxess DurethanÂ® DP 2131/20 H2.0 900051 Nylon 6, 20% Glass Fiber PA 6, injection molding grade, 20% glass fibers, better surface resistance to alcoholic calcium chloride-solution than BKV 20 H2.0, good heat-ageing resistance and weather resistance
Tensile Strength at Break	150 MPa	21800 psi	ISO 527 Type 1A
Solvay TECHNYLÂ® A 218 V35 PA66, 35% glass fiber, Conditioned Description: TECHNYLÂ® A 218 V35 is a polyamide 66, reinforced with 35% of glass fiber, heat stabilized, for injection molding. This product is available in natural and black colors.Benefits: The ..
Tensile Strength at Break	150 MPa	21800 psi	ISO R 527
Solvay TECHNYLÂ® C 218 V 50 PA6, 50% glass fiber, Eh 50 Description: TECHNYL C 218 V50 is a polyamide 6 reinforced with 50% of glass fiber with excellent thermal stabilityColors: it is supplied in natural color and black color.Available in: Latin America..
Tensile Strength at Break	150 MPa	21800 psi	ASTM D638
A. Schulman SCHULAMID® 66 GF30H 30% Glass Fiber Reinforced, Heat Stabilized Nylon 66 Information provided by A. Schulman.
Tensile Strength at Break	150 MPa	21800 psi	ISO 527-93
Wellman Wellamid® GF33-66/6 XE-NBK1 33% Glass Fiber Reinforced Nylon 66/6 Description: Glass Fiber Reinforced Nylon 66/6Information provided by Wellman.
Tensile Strength at Break	150 MPa	21800 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® BGZ-30/2 PA6-GF30 Product description: Grilon BGZ-30/2 is a heat stabilized and impact modified PA6 injection molding grade with 30% glass fibers. Grilon BGZ-30/2 has the following important properties: Good impact s..
Tensile Strength at Break	150 MPa	21800 psi	5 mm/min; ISO 527
CP-Polymer-Technik Wellamid® 6000/51 GV 30 HWCP 30% Glass Fiber Nylon 6, Low Temperature Impact Modified, Heat Stabilized, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG
Tensile Strength at Break	150 MPa	21800 psi	5 mm/min; ISO 527
CP-Polymer-Technik Wellamid® 6600 GV 35 HWCP 35% Glass Fiber Nylon 66, Heat Stabilized, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG
Tensile Strength at Break	150 MPa	21800 psi	conditioned; ISO 527-1/-2
EMS-Grivory Grivory® TSG-50/4 W PA666-GF50 Product description: Grilon TSG-50/4 W is a high heat stabilized, normal viscosity PA66 + PA6 injection molding grade with 50% glass fibers, modified for parts with high thermal demands. Grilon TSG-..
Tensile Strength at Break	150 MPa	21800 psi	5 mm/min; ISO 527
Eurostar Starflam RF0077P PA66/6, 35% Glass Filled, Injection Molded Starflam RF0077P is a Halogen Free and Red Phosphorous Free, Flame Retardant, Glass Fiber Reinforced, Polyamide 66/6 Injection Molding Resin (also known as RF1007Z270EM)Information provided by Polym..
Tensile Strength at Break	150 MPa	21800 psi	ISO 527
Eurotec® Tecomid® NB40 GR20 NL PA 6 20% glass fiber reinforced Excellent stiffness/toughness balanceHigh mechanical strengthVery good thermal stabilityExcellent flammability characteristicsGood electrical propertiesHigh wear resistance and low frictionVery good..
Tensile Strength at Break	150 MPa	21800 psi	ISO 527
Eurotec® Tecomid® NB40 GR30 NL MB PA6, 30% glass fiber reinforced, impact modified, heat stabilized, natural Information provided by Eurotec®
Tensile Strength at Break	150 MPa	21800 psi	5 mm/min; ISO 527
Eurostar Starflam AFR450B1 PA66, Glass Fiber Reinforced, Flame Retardant, Injection Molding Starflam AFR450B1 is a Flame Retardant, Glass Fiber Reinforced Polyamide 66, Injection Molding ResinInformation provided by Eurostar.
Tensile Strength at Break	150 MPa	21800 psi	5 mm/min; ISO 527
Eurostar Starflam PF0069 PA6, Glass Fiber Filled, Flame Retardant, Injection Molded Starflam PF0069 is a Flame Retardant, Glass Fiber Reinforced, Polyamide 6 Injection Molding ResinInformation provided by Eurostar.
Tensile Strength at Break	150 MPa	21800 psi	ISO 527-2
Ascend Performance Materials Vydyne® R533T Nylon 66, Translucent, 33% Glass Filled, Conditioned (2.5% Moisture) The Vydyne® R533T is a translucent 33% glass reinforced heat stabilized Nylon 66 product specifically designed for use in power steering reservoirs and other applications where chemical resistance,..
Tensile Strength at Break	150 MPa	21800 psi	ISO 527-1/-2
BASF Ultramid® S3EG6 Balance 30% Glass Filled PA 610 (Dry) Description: BASF supplies polyamide 610 for processing by injection molding under the trade name Ultramid® Balance which is produced by polycondensation of hexamethylene diamine and sebacic acid. ..
Tensile Strength at Break	150 MPa	21800 psi	5 [mm/min]; ISO 527-1/2
Akro-Plastic Akromid® B3 GF 20 (2470) PA 6 Dry, 20% Glass Filled AKROMID® B (Polyamide 6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperatur..
Tensile Strength at Break	150 MPa	21800 psi	ISO 527-1/-2
DSM Stanyl® TS250F4D Nylon 46-40% Glass Reinforced (Asian Grade) (Dry) Stanyl is a high performance polyamide providing good performance and value across a broad range of automotive and electronic applications. Stanyl offers:Highest mechanical properties at high tempe..
Tensile Strength at Break	150 MPa	21800 psi	ASTM D638
LNP Thermocomp® QF-1006 Polyamide 6/10 Copolymer, Glass Fiber Reinforcement (discontinued **) Forms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are still active under new names..
Tensile Strength at Break	150 MPa	21800 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics LNP THERMOCOMP 9X11427 LNP* THERMOCOMP* 9X11427 is a compound based on Miscellanbeous resin containing 40% specialty glass filled TP alloy. Added features of this grade include: Ultra-Stiff Toughness, Improved Impact, G..
Tensile Strength at Break	150 MPa @Temperature 23.0 °C	21800 psi @Temperature 73.4 °F	ISO 527
DuPont Performance Polymers Rynite® 530 BK503 PET (Unverified Data**) Rynite® 530 BK503 is a 30% glass reinforced modified polyethylene terephthalate with outstanding balance of strength, stiffness, and toughness, excellent electrical properties, surface appearance, ..