DuPont Performance Polymers Zytel® 103FHS NC010 Nylon 66 (Unverified Data**)

Category	Polymer , Thermoplastic , Nylon , Nylon 66
Manufacturer	DuPont Performance Polymers
Trade Name	Zytel®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Zytel® 103FHS NC010 Nylon 66 (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Unreinforced Heat Stabilized Polyamide 66 Zytel 103FHS NC010 is a heat stabilized internally lubricated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivity.Information provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Density	1.01 g/cc	0.0365 lb/in³
	1.14 g/cc	0.0412 lb/in³	DAM; ISO 1183
Water Absorption	8.5 % @Thickness 2.00 mm	8.5 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Moisture Absorption	2.60 % @Thickness 2.00 mm	2.60 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Viscosity	42210 cP @Shear Rate 5000 1/s, Temperature 295 °C	42210 cP @Shear Rate 5000 1/s, Temperature 563 °F	ISO 11403-1 -2
	86460 cP @Shear Rate 500 1/s, Temperature 295 °C	86460 cP @Shear Rate 500 1/s, Temperature 563 °F	ISO 11403-1 -2
Viscosity Test	145 cm³/g	145 cm³/g	DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow	0.014 cm/cm	0.014 in/in	DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse	0.013 cm/cm	0.013 in/in	DAM; ISO 294-4 2577

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	55.0 MPa	7980 psi	50%RH; ISO 527-1/-2
	85.0 MPa	12300 psi	DAM; ISO 527-1/-2
Elongation at Break	20 %	20 %	DAM; Nominal; ISO 527-1/-2
	>= 50 %	>= 50 %	50%RH; Nominal; ISO 527-1/-2
Elongation at Yield	4.5 %	4.5 %	DAM; ISO 527-1/-2
	4.5 %	4.5 %	DAM; ISO 527-3
	25 %	25 %	50%RH; ISO 527-1/-2
Tensile Modulus	1.40 GPa	203 ksi	50%RH; ISO 527-1/-2
	3.10 GPa	450 ksi	DAM; ISO 527-1/-2
	0.168 GPa @Temperature 250 °C	24.4 ksi @Temperature 482 °F	DAM; ISO 11403-1 -2
	0.3845 GPa @Temperature 170 °C	55.77 ksi @Temperature 338 °F	DAM; Dynamic; ISO 11403-1 -2
	0.445 GPa @Temperature 170 °C	64.6 ksi @Temperature 338 °F	DAM; ISO 11403-1 -2
	0.552 GPa @Temperature 110 °C	80.1 ksi @Temperature 230 °F	DAM; Dynamic; ISO 11403-1 -2
	0.688 GPa @Temperature 90.0 °C	99.8 ksi @Temperature 194 °F	DAM; ISO 11403-1 -2
	2.40 GPa @Temperature 50.0 °C	348 ksi @Temperature 122 °F	DAM; ISO 11403-1 -2
	3.095 GPa @Temperature 30.0 °C	448.9 ksi @Temperature 86.0 °F	DAM; Dynamic; ISO 11403-1 -2
	3.10 GPa @Temperature 20.0 °C	450 ksi @Temperature 68.0 °F	DAM; ISO 11403-1 -2
	3.256 GPa @Temperature -20.0 °C	472.2 ksi @Temperature -4.00 °F	DAM; Dynamic; ISO 11403-1 -2
	3.29 GPa @Temperature -10.0 °C	477 ksi @Temperature 14.0 °F	DAM; ISO 11403-1 -2
	3.5348 GPa @Temperature -50.0 °C	512.68 ksi @Temperature -58.0 °F	DAM; ISO 11403-1 -2
	3.628 GPa @Temperature -70.0 °C	526.2 ksi @Temperature -94.0 °F	DAM; Dynamic; ISO 11403-1 -2
	3.871 GPa @Temperature -100 °C	561.4 ksi @Temperature -148 °F	DAM; Dynamic; ISO 11403-1 -2
Flexural Modulus	1.30 GPa	189 ksi	50%RH; ISO 178
	2.80 GPa	406 ksi	DAM; ISO 178
Izod Impact, Notched (ISO)	5.50 kJ/m²	2.62 ft-lb/in²	DAM; ISO 180/1A
	11.0 kJ/m²	5.23 ft-lb/in²	50%RH; ISO 180/1A
	5.00 kJ/m² @Temperature -30.0 °C	2.38 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 180/1A
	5.50 kJ/m² @Temperature -40.0 °C	2.62 ft-lb/in² @Temperature -40.0 °F	DAM; ISO 180/1A
	6.00 kJ/m² @Temperature -30.0 °C	2.86 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 180/1A
Izod Impact, Unnotched (ISO)	300 kJ/m²	143 ft-lb/in²	DAM; ISO 180/1U
	NB	NB	50%RH; ISO 180/1U
	300 kJ/m² @Temperature -30.0 °C	143 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 180/1U
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	50%RH; ISO 180/1U
Charpy Impact Unnotched	NB	NB	DAM; ISO 179/1eU
	NB	NB	50%RH; ISO 179/1eU
	35.0 J/cm² @Temperature -30.0 °C	167 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eU
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	50%RH; ISO 179/1eU
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	DAM; ISO 179/1eA
	1.10 J/cm²	5.23 ft-lb/in²	50%RH; ISO 179/1eA
	0.300 J/cm² @Temperature -30.0 °C	1.43 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 179/1eA
	0.450 J/cm² @Temperature -30.0 °C	2.14 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	100 µm/m-°C	55.6 µin/in-°F	DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow	110 µm/m-°C	61.1 µin/in-°F	DAM; ISO 11359-1/-2
Specific Heat Capacity	2.79 J/g-°C	0.667 BTU/lb-°F
Thermal Conductivity	0.160 W/m-K	1.11 BTU-in/hr-ft²-°F	of melt
Melting Point	262 °C	504 °F	DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	200 °C	392 °F	DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	70.0 °C	158 °F	DAM; ISO 75-1/-2
Glass Transition Temp, Tg	60.0 °C	140 °F	DAM; 10°C/min; ISO 11357-1/-2
Flammability, UL94	V-2 @Thickness 1.50 mm	V-2 @Thickness 0.0591 in	DAM; IEC 60695-11-10
	V-2 @Thickness 0.700 mm	V-2 @Thickness 0.0276 in	DAM; IEC 60695-11-10
Oxygen Index	28 %	28 %	DAM; ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+11 ohm-cm	1.00e+11 ohm-cm	50%RH; IEC 60093
	1.00e+14 ohm-cm	1.00e+14 ohm-cm	DAM; IEC 60093
Dielectric Constant	3.2 @Frequency 1.00e+6 Hz	3.2 @Frequency 1.00e+6 Hz	DAM; ASTM D150
	3.4 @Frequency 100 Hz	3.4 @Frequency 100 Hz	DAM; ASTM D150
	3.4 @Frequency 1000 Hz	3.4 @Frequency 1000 Hz	DAM; ASTM D150
Dissipation Factor	0.010 @Frequency 100 Hz	0.010 @Frequency 100 Hz	DAM; ASTM D150
	0.010 @Frequency 1000 Hz	0.010 @Frequency 1000 Hz	DAM; ASTM D150
	0.020 @Frequency 1.00e+6 Hz	0.020 @Frequency 1.00e+6 Hz	DAM; ASTM D150
Comparative Tracking Index	600 V	600 V	DAM; IEC 60112
	>= 600 V @Thickness 3.00 mm	>= 600 V @Thickness 0.118 in	DAM; UL 746A

Descriptive Properties	Value	Comments
Additives	Lubricants
	Release agent
Delivery Form	Pellets
Eff. thermal diffusivity	5.00E-08 m²/s
Part Marking Code	>PA66<	ISO 11469
Processing	Injection Moulding
Regional Availability	Asia Pacific
	Europe
	Global
	Near East/Africa
	North America
	South and Central America
Resin Identification	PA66

Users viewing this material also viewed the following: