DuPont Performance Polymers Delrin® 100PE BK602 Acetal (POM) (Unverified Data**)

Category	Polymer , Thermoplastic , Acetal (POM) , Acetal Homopolymer, Unreinforced
Manufacturer	DuPont Performance Polymers
Trade Name	Delrin®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Delrin® 100PE BK602 Acetal (POM) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

High Viscosity Acetal Homopolymer with Very Low Emissions Delrin 100PE BK602 (formerly DE20573) is a high viscosity acetal homopolymer an enhanced version of Delrin 100P with very low VOC emissions. It has a great combination of strength and toughnessInformation provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Density	1.19 g/cc	0.0430 lb/in³
	1.42 g/cc	0.0513 lb/in³	ISO 1183
Linear Mold Shrinkage, Flow	0.022 cm/cm	0.022 in/in	ISO 294-4 2577
Linear Mold Shrinkage, Transverse	0.018 cm/cm	0.018 in/in	ISO 294-4 2577
Melt Flow	2.2 g/10 min @Load 2.16 kg, Temperature 190 °C	2.2 g/10 min @Load 4.76 lb, Temperature 374 °F	cm³/10min; ISO 1133
	2.6 g/10 min @Load 2.16 kg, Temperature 190 °C	2.6 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	92	92	ISO 2039-2
Hardness, Rockwell R	120	120	ISO 2039-2
Tensile Strength, Yield	72.0 MPa	10400 psi	ISO 527-1/-2
Elongation at Break	32 %	32 %	Nominal; ISO 527-1/-2
Elongation at Yield	21 %	21 %	ISO 527-1/-2
Tensile Modulus	3.10 GPa	450 ksi	ISO 527-1/-2
Flexural Strength	80.0 MPa @Strain 3.50 %	11600 psi @Strain 3.50 %	ISO 178
Flexural Modulus	2.90 GPa	421 ksi	ISO 178
Charpy Impact Unnotched	35.0 J/cm²	167 ft-lb/in²	ISO 179/1eU
	30.0 J/cm² @Temperature -30.0 °C	143 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
Charpy Impact, Notched	1.10 J/cm²	5.23 ft-lb/in²	ISO 179/1eA
	1.00 J/cm² @Temperature -30.0 °C	4.76 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	110 µm/m-°C	61.1 µin/in-°F	ISO 11359-1/-2
	100 µm/m-°C @Temperature -40.0 - 23.0 °C	55.6 µin/in-°F @Temperature -40.0 - 73.4 °F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	110 µm/m-°C	61.1 µin/in-°F	ISO 11359-1/-2
	100 µm/m-°C @Temperature -40.0 - 23.0 °C	55.6 µin/in-°F @Temperature -40.0 - 73.4 °F	ISO 11359-1/-2
Melting Point	178 °C	352 °F	10°C/min; ISO 11357-1/-3
Deflection Temperature at 1.8 MPa (264 psi)	97.0 °C	207 °F	ISO 75-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+15 ohm-cm	>= 1.00e+15 ohm-cm	IEC 60093
Surface Resistance	5.00e+13 ohm	5.00e+13 ohm	IEC 60093
Dielectric Constant	3.9 @Frequency 100 Hz	3.9 @Frequency 100 Hz	IEC 60250
	3.9 @Frequency 1.00e+6 Hz	3.9 @Frequency 1.00e+6 Hz	IEC 60250
Dielectric Strength	44.0 kV/mm	1120 kV/in	IEC 60243-1
Dissipation Factor	0.00050 @Frequency 100 Hz	0.00050 @Frequency 100 Hz	IEC 60250
	0.0055 @Frequency 1.00e+6 Hz	0.0055 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Descriptive Properties	Value	Comments
Additives	Release agent
Delivery Form	Pellets
Emissions	<2 mg/kg	VDA 275
Part Marking Code	>POM<	ISO 11469
Processing	Injection Moulding
	Other Extrusion
	Profile Extrusion
	Sheet Extrusion
Regional Availability	Asia Pacific
	Europe
	Global
	Near East/Africa
	North America
	South and Central America
Resin Identification	POM	ISO 1043

Users viewing this material also viewed the following: