- HOME
- POLYMER SEARCH
- Thermoplastic
- ASA Polymer
- Acrylonitrile/Styrene/Acrylate (ASA), Unreinforced, Molded
- Diamond Polymers ASA S-170 Lt Grey 50283UV f1 ASA Weatherable Polymers Injection Molding Grade, High Impact
Diamond Polymers ASA S-170 Lt Grey 50283UV f1 ASA Weatherable Polymers Injection Molding Grade, High Impact
| Category | Polymer , Thermoplastic , ASA Polymer , Acrylonitrile/Styrene/Acrylate (ASA), Unreinforced, Molded |
| Manufacturer | Diamond and Network Polymers |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Diamond Polymers ASA S-170 Lt Grey 50283UV f1 ASA Weatherable Polymers Injection Molding Grade, High Impact.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.09 g/cc | 1.09 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.0040 - 0.0080 cm/cm | 0.0040 - 0.0080 in/in | ASTM D955 |
| Melt Flow | 9.0 g/10 min @Load 10.0 kg, Temperature 220 °C |
9.0 g/10 min @Load 22.0 lb, Temperature 428 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 93 | 93 | ASTM D785 |
| Tensile Strength, Yield | 40.0 MPa | 5800 psi | chs 2.0 in/min; ASTM D638 |
| Flexural Modulus | 2.136 GPa | 309.8 ksi | tangent; chs 0.05 in/min; ASTM D790 |
| Izod Impact, Notched | 3.204 J/cm @Thickness 3.17 mm, Temperature 23.0 °C |
6.002 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 104 °C @Load 1.00 kg, Thickness 3.17 mm |
219 °F @Load 2.20 lb, Thickness 0.125 in |
ASTM D1525 |
| Flammability, UL94 | HB @Thickness 1.59 mm |
HB @Thickness 0.0625 in |
Users viewing this material also viewed the following:
- MV Labs IN100 In(C2H3O2)3·xH2O Indium(III) acetate hydrate
- Parker Chomerics CHO-THERM® 1646 Non-Insulating Interface Material
- Nilit FRIANYL C73 GV15 Nylon 6.6/6 for injection molding, 15% glass fiber reinforced
- Fluorseals PTFE 25% glass filled
- Momentive Performance Materials TSE322B Black Adhesive Sealant, Non-Corrosive Flowable
- Taiwan Sheen Soon Sheenthane® A7810H TPU for Ink
- SABIC Innovative Plastics LNP THERMOTUF VF006U Super Tough Nylon
- ExxonMobil Mobil Vaculine 146
- Beijing Chemical Industry KAIFA® GL5200 ABS Extrusion Grade
Copyright © lookpolymers.com All Rights Reserved