Chesterton ARC MX5 Rapid Curing Fine Particle Wear Compound

Description: An advanced ceramic reinforced composite for the emergency repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is applied at a thickness of 3 mm (1/8”) or more. Non-shrinking. 100% Solids. ARC MX5 is formulated with a high concentration of small ceramic beads and particles for extremely abrasive environments where metal loss is often repaired by more conventional and costly weld overlay. ARC MX5 can be used either to rebuild eroded metal surfaces or to provide a wear resistant, sacrificial surface which frequently outperforms the original metal, rubber liners, ceramic tiles or weld overlay. ARC MX5 is chosen over other ARC Composites for abrasion when a rapid cure, emergency repair is needed.Benefits:Excellent wear characteristics of ARC MX5 extend equipment operating cycles.Tough resin structures resist thermal-mechanical shockOutstanding adhesion results in reliable performance with no undercuttingEase of application reduces labor and downtime costsRapid cure allow return to service in 1 hour or less.Easily shaped and formed to any metal surface. Suggested Uses:Pneumatic ConveyorsChipper and Chip BinsHydro PulpersTurbo SeparatorsNi-Hard Slurry PumpsFly Ash SeparatorsWood Chip Transport FansScrew ConveyorsExhaust FansCyclones, HoppersWear PlatesPipe ElbowsPulverized Fuel LinesPulverizers Information provided by Chesterton