POLYMER SEARCH

BASF Ultrason E 2010 PES

Category	Polymer , Thermoplastic , Polyethersulfone (PES)
Manufacturer	BASF
Trade Name	Ultrason E
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultrason E 2010 PES.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Ultrason E 2010 is an unreinforced, medium viscosity standard injection molding PES grade. It flows readily and offers outstanding heat resistance and dimensional stability. It conforms to FDA requirements of 21 CFR 177.2440.

Physical Properties	Metric	English	Comments
Density	1.37 g/cc	0.0495 lb/in³	ISO 1183
Water Absorption	2.2 %	2.2 %	ISO 62
Moisture Absorption at Equilibrium	0.80 %	0.80 %	23°C/50% R.H.; ISO 62
Viscosity Test	56 cm³/g	56 cm³/g	Viscosity number
Linear Mold Shrinkage, Flow	0.0082 cm/cm	0.0082 in/in	ISO 294
Linear Mold Shrinkage, Transverse	0.0086 cm/cm	0.0086 in/in	ISO 294
Melt Flow	70 g/10 min @Load 10.0 kg, Temperature 360 °C	70 g/10 min @Load 22.0 lb, Temperature 680 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	154 MPa	22300 psi	ISO 2039-1
Tensile Strength at Break	90.0 MPa	13100 psi	5mm/min; ISO 527-2
Tensile Strength, Yield	90.0 MPa	13100 psi	50mm/min; ISO 527-2
Elongation at Break	6.7 %	6.7 %	5mm/min; ISO 527-2
Elongation at Yield	6.7 %	6.7 %	50mm/min; ISO 527-2
Modulus of Elasticity	2.50 GPa @Temperature 60.0 °C	363 ksi @Temperature 140 °F	ISO 527
Tensile Modulus	2.70 GPa	392 ksi	ISO 527-2
Flexural Strength	131 MPa	19000 psi	ISO Data
Flexural Modulus	2.60 GPa	377 ksi	ASTM Test
	2.86 GPa	415 ksi	ISO Data
Fatigue Strength	5.00 MPa @# of Cycles 1.00e+7 , Temperature 180 °C	725 psi @# of Cycles 1.00e+7 , Temperature 356 °F
	7.00 MPa @# of Cycles 1.00e+6 , Temperature 180 °C	1020 psi @# of Cycles 1.00e+6 , Temperature 356 °F
	9.00 MPa @# of Cycles 100000 , Temperature 180 °C	1310 psi @# of Cycles 100000 , Temperature 356 °F
	12.0 MPa @# of Cycles 10000 , Temperature 180 °C	1740 psi @# of Cycles 10000 , Temperature 356 °F
	22.0 MPa @# of Cycles 1.00e+7	3190 psi @# of Cycles 1.00e+7
	25.0 MPa @# of Cycles 100000	3630 psi @# of Cycles 100000
	35.0 MPa @# of Cycles 100000	5080 psi @# of Cycles 100000
	55.0 MPa @# of Cycles 10000	7980 psi @# of Cycles 10000
Shear Modulus	0.200 GPa @Temperature 225 °C	29.0 ksi @Temperature 437 °F	ISO 6721
	0.900 GPa @Temperature 200 °C	131 ksi @Temperature 392 °F	ISO 6721
	0.950 GPa @Temperature 100 °C	138 ksi @Temperature 212 °F	ISO 6721
	1.00 GPa @Temperature 50.0 °C	145 ksi @Temperature 122 °F	ISO 6721
Izod Impact, Notched (ISO)	6.50 kJ/m²	3.09 ft-lb/in²	ISO 180/A
	7.00 kJ/m² @Temperature -30.0 °C	3.33 ft-lb/in² @Temperature -22.0 °F	ISO 180/A
Charpy Impact Unnotched	NB	NB	ISO 179/1eU
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ISO 179/1eU
Charpy Impact, Notched	0.650 J/cm²	3.09 ft-lb/in²	ISO 179/1eA
	0.700 J/cm² @Temperature -30.0 °C	3.33 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
Tensile Creep Modulus, 1000 hours	2700 MPa	392000 psi	elongation <0.5%, 23°C; ISO 899

Thermal Properties	Metric	English	Comments
CTE, linear	50.0 µm/m-°C @Temperature -26.0 °C	27.8 µin/in-°F @Temperature -14.8 °F	DIN 53752
	54.0 µm/m-°C @Temperature 75.0 °C	30.0 µin/in-°F @Temperature 167 °F	DIN 53752
	60.0 µm/m-°C @Temperature 175 °C	33.3 µin/in-°F @Temperature 347 °F	DIN 53752
CTE, linear, Parallel to Flow	52.0 µm/m-°C	28.9 µin/in-°F	ISO 11359-1/-2
	59.0 µm/m-°C	32.8 µin/in-°F	ISO 11359-1/-2
Specific Heat Capacity	1.00 J/g-°C	0.239 BTU/lb-°F
Thermal Conductivity	0.190 W/m-K	1.32 BTU-in/hr-ft²-°F	DIN 52612-1
Maximum Service Temperature, Air	220 °C	428 °F
Deflection Temperature at 0.46 MPa (66 psi)	218 °C	424 °F	ISO 75-2
Deflection Temperature at 1.8 MPa (264 psi)	205 °C	401 °F	ISO 75-2
Glass Transition Temp, Tg	225 °C	437 °F	ISO 11357-1/-3
UL RTI, Electrical	190 °C	374 °F	50% decrease of tensile strength after 20000h; 746B
Flammability, UL94	V-0 @Thickness 3.20 mm	V-0 @Thickness 0.126 in
	V-0 @Thickness 1.60 mm	V-0 @Thickness 0.0630 in
	5VA @Thickness >=3.00 mm	5VA @Thickness >=0.118 in
Oxygen Index	38 %	38 %	ISO 4589-1/-2
Glow Wire Test	825 °C	1520 °F	Ignition Temperature; IEC 60695-2-13
	960 °C	1760 °F	Flammability Index; IEC 60695-2-12

Optical Properties	Metric	English	Comments
Refractive Index	1.65	1.65
Transmission, Visible	88 % @Thickness 50.8 mm	88 % @Thickness 2.00 in	ASTM D 1003
	30 % @Wavelength 350 nm	30 % @Wavelength 350 nm
	72 % @Wavelength 400 nm	72 % @Wavelength 400 nm
	81 % @Wavelength 500 nm	81 % @Wavelength 500 nm
	85 % @Wavelength 600 nm	85 % @Wavelength 600 nm
UV Transmittance	2.0 % @Wavelength 300 nm	2.0 % @Wavelength 300 nm
	15 % @Wavelength 200 nm	15 % @Wavelength 200 nm

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+14 ohm	>= 1.00e+14 ohm	IEC 60093
Dielectric Constant	3.8 @Frequency 1.00e+6 Hz	3.8 @Frequency 1.00e+6 Hz	IEC 60250
	3.9 @Frequency 100 Hz	3.9 @Frequency 100 Hz	IEC 60250
Dielectric Strength	37.0 kV/mm	940 kV/in	IEC 60243-1
Dissipation Factor	0.0017 @Frequency 100 Hz	0.0017 @Frequency 100 Hz	IEC 60250
	0.014 @Frequency 1.00e+6 Hz	0.014 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	125 V	125 V	Test Liquid A & B; IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	340 - 390 °C	644 - 734 °F	Injection molding
Mold Temperature	140 - 180 °C	284 - 356 °F	Injection molding

Descriptive Properties	Value	Comments
Color	Natural and colored
Commercial Status	North America and Europe

Users viewing this material also viewed the following: