BASF Ultramid® B3ZG8 BK 20560 40% Glass Filled PA6-1 (Conditioned)

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 40% Glass Fiber Filled
Manufacturer	BASF
Trade Name	Ultramid®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultramid® B3ZG8 BK 20560 40% Glass Filled PA6-1 (Conditioned).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Description: Impact-modified and 40% glass-fiber reinforced injection-molding grade for technical articles of very high stiffness and toughness, for instance, for vehicle airbag housings and suitcase shell.Information provided by BASF

Physical Properties	Metric	English	Comments
Density	1.40 g/cc	0.0506 lb/in³	ISO 1183
Water Absorption	4.7 - 5.3 %	4.7 - 5.3 %	Saturation; ISO 62
Moisture Absorption at Equilibrium	1.4 - 1.8 %	1.4 - 1.8 %	23°C; 50% RH; ISO 62
Viscosity Measurement	160	160	ISO 307
Linear Mold Shrinkage	0.0035 cm/cm	0.0035 in/in	restricted
Melt Flow	12.6 g/10 min @Load 5.00 kg, Temperature 275 °C	12.6 g/10 min @Load 11.0 lb, Temperature 527 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	84.0 MPa @Load 36.5 kg, Time 30.0 sec	12200 psi @Load 80.5 lb, Time 0.00833 hour	ISO 2039-1
Tensile Strength, Yield	115 MPa	16700 psi	50 mm/min; ISO 527-1/-2
Elongation at Yield	9.5 %	9.5 %	50 mm/min; ISO 527-1/-2
Modulus of Elasticity	6.70 GPa	972 ksi	ISO 527-1/-2
Flexural Strength	155 MPa	22500 psi	at max force; ISO 178
Flexural Modulus	6.70 GPa	972 ksi	ISO 178
Charpy Impact Unnotched	13.0 J/cm² @Temperature 23.0 °C	61.9 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	4.00 J/cm² @Temperature 23.0 °C	19.0 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA

Thermal Properties	Metric	English	Comments
Thermal Conductivity	0.360 W/m-K	2.50 BTU-in/hr-ft²-°F	DIN 52612
Melting Point	220 °C	428 °F	DIN 53765
Maximum Service Temperature, Air	180 °C	356 °F
Decomposition Temperature	>= 300 °C	>= 572 °F

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+10 ohm-cm	1.00e+10 ohm-cm	IEC 60093
Surface Resistance	1.00e+10 ohm	1.00e+10 ohm	IEC 60093
Dielectric Constant	5.3 @Frequency 1.00 Hz	5.3 @Frequency 1.00 Hz	IEC 60250
Dissipation Factor	0.13 @Frequency 1.00e+6 Hz	0.13 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	550 V	550 V	Test solution A; IEC 60112

Processing Properties	Metric	English	Comments
Processing Temperature	80.0 °C	176 °F	Hopper Throat
Zone 1	260 °C	500 °F	Feed Zone
Zone 2	270 °C	518 °F	Compression
Zone 3	280 °C	536 °F	Metering-zone
Zone 4	280 °C	536 °F	Nozzle
Melt Temperature	270 - 290 °C	518 - 554 °F	Injection-molding/Extrusion
	280 °C	536 °F	Optimal
Mold Temperature	80.0 °C	176 °F	Optimal
	80.0 - 90.0 °C	176 - 194 °F	Injection-molding
Drying Temperature	80.0 °C	176 °F
Dry Time	4 hour	4 hour
Moisture Content	0.030 - 0.060 %	0.030 - 0.060 %	Optimal
	<= 0.15 %	<= 0.15 %

Descriptive Properties	Value	Comments
Color	BK 20560
Commercial Status	Europe
Ignition Temperature	>400°C	ASTM D129
Peripheral screw speed	< 0.3 m/s

Users viewing this material also viewed the following: