BASF Ultramid® B3ZG6 BK 30564 30% Glass Filled PA6-1 (Conditioned)

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 30% Glass Fiber Filled
Manufacturer	BASF
Trade Name	Ultramid®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultramid® B3ZG6 BK 30564 30% Glass Filled PA6-1 (Conditioned).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: Impact-modified and 30% glass fiber reinforced injection-molding grade for technical articles of very high stiffness and toughness, for instance, for vehicle airbag housings and suitcase shells.Information provided by BASF

Physical Properties	Metric	English	Comments
Density	1.33 g/cc	0.0480 lb/in³	ISO 1183
Water Absorption	5.9 - 6.5 %	5.9 - 6.5 %	Saturation; ISO 62
Moisture Absorption at Equilibrium	1.8 - 2.2 %	1.8 - 2.2 %	23°C; 50% RH; ISO 62
Viscosity Measurement	160	160	ISO 307
Linear Mold Shrinkage	0.0050 cm/cm	0.0050 in/in	restricted
Melt Flow	33.25 g/10 min @Load 5.00 kg, Temperature 275 °C	33.25 g/10 min @Load 11.0 lb, Temperature 527 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	100 MPa	14500 psi	50 mm/min; ISO 527-1/-2
Elongation at Yield	10 %	10 %	50 mm/min; ISO 527-1/-2
Modulus of Elasticity	5.30 GPa	769 ksi	ISO 527-1/-2
Flexural Strength	130 MPa	18900 psi	at max force; ISO 178
Flexural Modulus	4.70 GPa	682 ksi	ISO 178
Izod Impact, Notched (ISO)	32.0 kJ/m² @Temperature 23.0 °C	15.2 ft-lb/in² @Temperature 73.4 °F	ISO 180/A
Charpy Impact Unnotched	11.0 J/cm² @Temperature 23.0 °C	52.3 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	3.50 J/cm² @Temperature 23.0 °C	16.7 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA
Tensile Creep Modulus, 1000 hours	3000 MPa @Strain <=0.500 %	435000 psi @Strain <=0.500 %	ISO 899-1

Thermal Properties	Metric	English	Comments
Thermal Conductivity	0.350 W/m-K	2.43 BTU-in/hr-ft²-°F	DIN 52612
Melting Point	220 °C	428 °F	DIN 53765
Maximum Service Temperature, Air	180 °C	356 °F

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+10 ohm-cm	1.00e+10 ohm-cm	IEC 60093
Surface Resistance	1.00e+10 ohm	1.00e+10 ohm	IEC 60093
Dielectric Constant	6.8 @Frequency 1.00 Hz	6.8 @Frequency 1.00 Hz	IEC 60250
Dissipation Factor	0.20 @Frequency 1.00e+6 Hz	0.20 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	550 V	550 V	Test solution A; IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	270 - 290 °C	518 - 554 °F	Injection-molding/Extrusion
Mold Temperature	80.0 - 90.0 °C	176 - 194 °F	Injection-molding

Descriptive Properties	Value	Comments
Color	BK 30564
Commercial Status	Europe

Users viewing this material also viewed the following: