Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

BASF Ultramid® A3EG7 35% Glass Filled PA66 (Conditioned)

Category Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 40% Glass Fiber Filled
Manufacturer BASF
Trade Name Ultramid®
Port Ningbo port, China
Download PDF BASF Ultramid® A3EG7 35% Glass Filled PA66 (Conditioned).pdf
Price EMAIL US  sales@lookpolymers.com
Material Notes:
Ultramid A3EG6 is a 35% glass fiber reinforced injection molding PA66 grade for machinery components and housings of high stiffness and dimensional stability.
Mechanical Properties Metric English Comments
Density 1.41 g/cc
0.0509 lb/in³
ISO 1183
Water Absorption 4.7 - 5.3 %
4.7 - 5.3 %
ISO 62
Moisture Absorption at Equilibrium 1.4 - 1.8 %
1.4 - 1.8 %
(23°C/50% R.H.); ISO 62
Viscosity Test 145 cm³/g
145 cm³/g
Viscosity number
Linear Mold Shrinkage 0.0050 cm/cm
0.0050 in/in
ISO 307
Melt Flow 49.3 g/10 min
<br>@Load 5.00 kg,<br> Temperature 275 °C
 49.3 g/10 min
<br>@Load 11.0 lb,<br> Temperature 527 °F
 ISO 1133
Thermal Properties Metric English Comments
Tensile Strength, Yield 150 MPa
21800 psi
50mm/min; ISO 527
Elongation at Yield 5.0 %
5.0 %
50mm/min; ISO 527
Modulus of Elasticity 8.50 GPa
1230 ksi
ISO 527
Flexural Strength 240 MPa
34800 psi
ISO178
Flexural Modulus 8.00 GPa
1160 ksi
ISO 178
Izod Impact, Notched (ISO) 18.0 kJ/m²
8.57 ft-lb/in²
ISO 180/A
Charpy Impact Unnotched 10.5 J/cm²
50.0 ft-lb/in²
ISO 179/1eU
Charpy Impact, Notched 2.20 J/cm²
10.5 ft-lb/in²
ISO 179/1eA
Tensile Creep Modulus, 1000 hours 6650 MPa
965000 psi
ISO 899
Optical Properties Metric English Comments
Specific Heat Capacity 1.50 J/g-°C
0.359 BTU/lb-°F
Thermal Conductivity 0.350 W/m-K
2.43 BTU-in/hr-ft²-°F
DIN 52612
Melting Point 260 °C
500 °F
DIN 53765
Maximum Service Temperature, Air 135 °C
275 °F
for 50% loss of tensile strength after 20,000 hr
165 °C
329 °F
for 50% loss of tensile strength after 5,000 hr
240 °C
464 °F
Electrical Properties Metric English Comments
Melt Temperature 280 - 300 °C
536 °F
Injection-molding/Extrusion
Mold Temperature 80.0 - 90.0 °C
176 °F
Injection-molding
Compliance Properties Metric English Comments
Color Natural
Commercial Status North America and Europe
Form Pellets
Impact Modified No
NSF Std. 61 Yes
Primary Processing Technique Injection Molding
Processing Injection Molding
Special characteristic Heat stabilized or stable to heat
Chemical Resistance Properties Metric English Comments
Volume Resistivity 1.00e+10 ohm-cm
1.00e+10 ohm-cm
IEC 60093
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
Dielectric Constant 5.7
<br>@Frequency 1.00e+6 Hz
 5.7
<br>@Frequency 1.00e+6 Hz
 IEC 60250
Dissipation Factor 0.15
<br>@Frequency 1.00e+6 Hz
 0.15
<br>@Frequency 1.00e+6 Hz
 IEC 60250
Comparative Tracking Index 550 V
550 V
Test Solution A; IEC 60112
Users viewing this material also viewed:
Copyright © lookpolymers.com All Rights Reserved