Electrical Properties | Metric | English | Comments |
---|---|---|---|
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Quadrant EPP Fluorosint® 500 PTFE + mica, compression moulded (ISO Data) Reinforced with a proprietary synthetic mica, this material exhibits, in addition to its inherent outstanding chemical and hydrolysis resistance, very good mechanical and tribological properties Hig.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond HH131 High Temperature Threadlocker Permabond® HH131 is a very high temperature resistant, high strength anaerobic threadlocker and sealant. This material cures in the absence of air between tight fitting metal parts. It is used for .. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond HH167 Anaerobic Retainer Permabond® HH167 is a high viscosity gap filling silver paste, which can be used for repairing metal machinery parts. It is ideal for repairing worn shafts, broken threads, damaged keyways and spli.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond HH190 Anaerobic Gasketmaker Permabond® HH190 Gasketmaker is an anaerobic curing flange sealant that can replace, or be used as a dressing for, conventional pre-cut gaskets. Since HH190 is a flowable paste, it conforms to the .. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond HL138 Anaerobic Retaining Compound Permabond® HL138 is a single component liquid that cures only when in contact with metal parts and oxygen is excluded. The liquid adhesive fills the “air space” between parts and upon cure which .. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond HM118 Anaerobic Threadlocker Permabond® HM118 Threadlocker is an excellent general-purpose threadlocker and sealant. It is used for locking bolts, nuts and screws that require permanent assembly. Cure is fast and reliable on s.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond HM128 Anaerobic Threadlocker Permabond® HM128 Threadlocker is a high strength adhesive for permanent assembly. It is typically used for preventing vibration loosening of bolts, studs and cap screws. Full cure to a cross-linked.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond HM160 Anaerobic Retaining Compound Permabond® HM160 is a medium viscosity liquid adhesive that cures when confined between metal parts to form a tough, hard plastic. In the uncured, liquid state, the adhesive wets the metal surfaces.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond HM161 Anaerobic Retaining Compound Permabond® HM161 is a single component liquid that cures only when in contact with metal parts and oxygen is excluded. The liquid adhesive fills the “air space’ between parts and upon cure unitiz.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond LM113 Anaerobic Threadlocker Permabond® LM113 Threadlocker is a medium viscosity product for locking small threaded fasteners, such as screws and bolts or hydraulic fittings that might require disassembly. Due to its thixotrop.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond MH196 Anaerobic Gasketmaker Permabond® MH196 is an anaerobic material designed for making “formed in situ” gaskets between metal surfaces. It is capable of replacing a wide range of conventional gaskets, thereby offering po.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond MH199 Anaerobic Gasketmaker Permabond® MH199 is an anaerobic material designed for making “formed in situ” gaskets between metal surfaces. It is capable of replacing a wide range of conventional gaskets, thereby offering po.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | 200°C for 1,000 hrs |
Fujipoly Industries Sarcon® 30Q Thin-Film QR Sarcon QR is Fujipolys originally developed High Heat Conductive/Low Hardness Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Information prov.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | 60°C for 500 hrs with 95% RH |
Fujipoly Industries Sarcon® 30Q Thin-Film QR Sarcon QR is Fujipolys originally developed High Heat Conductive/Low Hardness Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Information prov.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | ASTM D149; at 1 mil |
Westlake Plastics HTP 800 Clear PVC HTP 800 is a clear PVC based material for use as windows and doors in cleanroom equipment. Notable properties include light transmission, chemical resistance, and flame resistance. Information prov.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | Short Time; ASTM D149 |
Plenco 4311 Phenolic, Granular, Injection Molded PLENCO 04311 is a heat resistant, mineral filled phenolic molding compound offering excellent processability, mechanical strength, and improved cold powder pourability characteristics. UL recognized.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | Short Time; ASTM D149 |
Plenco 4548 Phenolic, Granular, Injection Molded PLENCO 04548 is a heat resistant mineral filled phenolic molding compound, offering fast cure rates and hot rigidity. Type ASTM 5948 CFG, and UL recognized under component file E40654. 04548 is avai.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | ASTM D149 |
Toyobo TS201 HS PPS, Glass Fiber/Mineral Reinforced Key Feature: High stiffness, high toughnessHigh performance injection-molding resin created from crystalline polyphenylene sulfide, using a special formulation technology developed by Toyobo. Excel.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | ASTM D149 |
Toyobo TS201 PPS, Glass Fiber/Mineral Reinforced Key Feature: Standard high stiffness - used for metal replacementHigh performance injection-molding resin created from crystalline polyphenylene sulfide, using a special formulation technology devel.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Dow Corning SLYGARD® 535 THIXOTROPIC DIELECTRIC GEL Information provided by Dow Corning |
|||
Dielectric Strength | 11.0 kV/mm @Thickness 3.00 mm |
279 kV/in @Thickness 0.118 in |
24hr/23°C/50% RH+1hr/oil 90°C; Perpendicular; IEC 60243-1; IEC/EN 61212-2 6.1.2.1 |
Elektro-Isola G-Etronax EP 22 Epoxy, Glass Fabric Reinforcement, Light Yellow, Tubes Description: Particularly good electrical and mechanical properties. Extremely high mechanical strength, even at high temperatures. Retains electrical properties at high air humidity. High resistanc.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond A1044 Anaerobic Threadsealant Permabond® A1044 is a rapid curing sealant designed to lock and seal metal pipe connections, offering very good resistance to even the most aggressive chemicals. Permabond A1044 can be used to seal.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond HM135 Anaerobic Retainer Permabond® HM135 is a fast curing, medium viscosity anaerobic adhesive for locking and sealing threads and retaining cylindrical components. It gives maximum torque strength on brass or plated bras.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond MH052 Anaerobic Threadsealant Permabond® MH052 is ideal for the sealing of threaded joints. It is approved for use with natural gas and LPG for working pressure up to 20 bar (290 psi) and also for gaseous oxygen up to 10 bar (1.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond A1046 Anaerobic Retainer Permabond® A1046 is a rapid curing adhesive designed to provide permanent locking and sealing of metal parts such as bearings, gears, pulleys and threaded components. It exhibits high strength and .. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond A130 Anaerobic Threadlocker Designed for the locking and sealing of metal parts, Permabond® A130 is ideally suited for use on components that need to be dismantled for maintenance. Giving vibration resistance it can be used t.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond A134 Anaerobic Retainer Permabond® A134 is a high-strength anaerobic product designed for the permanent locking and sealing of metal parts. Its 'non-drip' formulation makes it suitable for use on larger fittings, coarse t.. |
|||
Dielectric Strength | 11.0 kV/mm | 279 kV/in | |
Permabond A136 Anaerobic Gasketmaker Permabond® A136 is an anaerobic material designed for making 'formed in situ' gaskets between metal surfaces. It is capable of replacing a wide range of conventional gaskets thereby offering potent.. |