Quadrant EPP Fluorosint® 500 PTFE + mica, compression moulded (ISO Data)

Category	Polymer , Thermoplastic , Fluoropolymer , PTFE , Polytetrafluoroethylene (PTFE), Mica Filled
Manufacturer	Quadrant Engineering Plastics Products
Trade Name	Fluorosint®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Quadrant EPP Fluorosint® 500 PTFE + mica, compression moulded (ISO Data).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Reinforced with a proprietary synthetic mica, this material exhibits, in addition to its inherent outstanding chemical and hydrolysis resistance, very good mechanical and tribological properties High maximum allowable service temperature in air (260°C continuously) Excellent chemical and hydrolysis resistance Outstanding UV- and weather resistance Physiologically inert (suitable for food contact, except Fluorosint 500, Fluorosint MT-01) Inherent low flammability Good electrical insulating properties

Physical Properties	Metric	English	Comments
Density	2.32 g/cc	0.0838 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	<= 0.10 %	<= 0.10 %	50% RH
Water Absorption at Saturation	1.5 - 2.5 %	1.5 - 2.5 %

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	55	55	ISO 2039-2
Hardness, Shore D	65	65
Ball Indentation Hardness	60.0 MPa	8700 psi	ISO 2039-1
Tensile Strength	7.00 MPa	1020 psi	at Yield; ISO 527-1/-2
Elongation at Break	15 %	15 %	ISO 527-1/-2
Elongation at Yield	5.0 %	5.0 %	ISO 527-1/-2
Tensile Modulus	1.75 GPa	254 ksi	ISO 527-1/-2
Flexural Strength	13.0 MPa	1890 psi
Compressive Strength	12.0 MPa @Strain 1 %	1740 psi @Strain 1 %	ISO 604
	19.0 MPa @Strain 2 %	2760 psi @Strain 2 %	ISO 604
	25.0 MPa @Strain 5 %	3630 psi @Strain 5 %	ISO 604
K Factor (ISO)	12 µm/km	12 µm/km
Charpy Impact Unnotched	0.800 J/cm²	3.81 ft-lb/in²	ISO 179-1/1eU
Charpy Impact, Notched	0.450 J/cm²	2.14 ft-lb/in²	ISO 179-1/1eA
Coefficient of Friction, Dynamic	0.20 - 0.30	0.20 - 0.30
Limiting Pressure Velocity	0.250 MPa-m/sec	7140 psi-ft/min	at 1 m/s unlubricated
	0.400 MPa-m/sec	11400 psi-ft/min	at 0.1 m/s unlubricated

Thermal Properties	Metric	English	Comments
CTE, linear	50.0 µm/m-°C @Temperature 23.0 - 100 °C	27.8 µin/in-°F @Temperature 73.4 - 212 °F
Thermal Conductivity	0.770 W/m-K	5.34 BTU-in/hr-ft²-°F
Melting Point	327 °C	621 °F	DSC, 10°C/min.; ISO 11357-1/-3
Maximum Service Temperature, Air	260 °C	500 °F	Continuous
Deflection Temperature at 1.8 MPa (264 psi)	130 °C	266 °F	ISO 75-1/-2
Flammability, UL94	V-0	V-0
Oxygen Index	>= 95 %	>= 95 %	ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.0e+13 ohm-cm	>= 1.0e+13 ohm-cm	IEC 60093
Surface Resistivity per Square	>= 1.0e+13 ohm	>= 1.0e+13 ohm	IEC 60093
Dielectric Strength	11.0 kV/mm	279 kV/in

Compliance Properties	Metric	English
3A-Dairy	No	No
European Food 1935/2004	No	No
FDA	No	No
USP Class VI	No	No

Chemical Resistance Properties	Metric	English
Acids, Strong (pH 1-3)	Acceptable	Acceptable
Acids, Weak	Acceptable	Acceptable
Alcohols	Acceptable	Acceptable
Alkalies, Strong (pH 11-14)	Unacceptable	Unacceptable
Alkalies, Weak	Acceptable	Acceptable
Chlorinated Solvents	Acceptable	Acceptable
Continuous Sunlight	Acceptable	Acceptable
Hot Water / Steam	Limited	Limited
Hydrocarbons - Aliphatic	Acceptable	Acceptable
Hydrocarbons - Aromatic	Acceptable	Acceptable
Inorganic Salt Solutions	Acceptable	Acceptable
Ketones, Esters	Acceptable	Acceptable

Users viewing this material also viewed the following: