DSM Stanyl® TW300 Nylon 46 (European and Asian Grade) (Cond)

Category	Polymer , Thermoplastic , Nylon , Nylon 46 , Nylon 46, Unreinforced
Manufacturer	DSM Engineering Plastics
Trade Name	Stanyl®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DSM Stanyl® TW300 Nylon 46 (European and Asian Grade) (Cond).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Stanyl is a high performance polyamide providing good performance and value across a broad range of automotive and electronic applications. Stanyl offers:Highest mechanical properties at high temperatures Excellent resistance to wear and low friction Outstanding flow for easy processing and exceptional design freedomStanyl High Flowgrades that match the best flowing LCPs while maintaining a high level of mechanical propertiesKey Applications: Automotive: Powertrain components, Charge-air coolers, EPS and ETC gears, Motor Sensors, Auto connectors, Chain tensionersE&E: Connectors, Microswitches, Bobbins, Memory modules, Motor components, Industrial, Specialty films and fibers, Consumer appliancesInformation provided by DSM.

Physical Properties	Metric	English	Comments
Density	1.18 g/cc	0.0426 lb/in³	(DAM); ISO 1183
Water Absorption	13.5 %	13.5 %	DAM; Sim. to ISO 62
Moisture Absorption at Equilibrium	3.7 %	3.7 %	Humidity Absorption (DAM); Sim. to ISO 62
Linear Mold Shrinkage, Flow	0.020 cm/cm	0.020 in/in	DAM; ISO 294-4
	0.020 cm/cm	0.020 in/in	DAM; ISO 294-4

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	55.0 MPa	7980 psi	ISO 527-1/-2
Elongation at Break	>= 50 %	>= 50 %	ISO 527-1/-2
Elongation at Yield	20 %	20 %	ISO 527-1/-2
Tensile Modulus	1.00 GPa	145 ksi	ISO 527-1/-2
Charpy Impact Unnotched	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ISO 179/1eU
	NB @Temperature 23.0 °C	NB @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	1.20 J/cm² @Temperature -30.0 °C	5.71 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
	4.50 J/cm² @Temperature 23.0 °C	21.4 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA
Tensile Creep Modulus, 1000 hours	500 MPa	72500 psi	ISO 899-1

Thermal Properties	Metric	English	Comments
Melting Point	295 °C	563 °F	10°C/min (DAM); ISO 11357-1/-3

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+9 ohm-cm	1.00e+9 ohm-cm	IEC 60093
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Dielectric Constant	4.5 @Frequency 1e+6 Hz	4.5 @Frequency 1e+6 Hz	IEC 60250
	22 @Frequency 100 Hz	22 @Frequency 100 Hz	IEC 60250
Dielectric Strength	15.0 kV/mm	381 kV/in	IEC 60243-1
Dissipation Factor	0.012 @Frequency 1e+6 Hz	0.012 @Frequency 1e+6 Hz	IEC 60250
	0.087 @Frequency 100 Hz	0.087 @Frequency 100 Hz	IEC 60250
Comparative Tracking Index	400 V	400 V	IEC 60112

Descriptive Properties	Value	Comments
Heat stabilized or stable to heat	Yes
Injection molding	Yes
Platable	Yes
Without Fillers	Yes

Users viewing this material also viewed the following: