Processing Properties | Metric | English | Comments |
---|---|---|---|
Mold Temperature | 37.8 - 43.3 °C | 100 - 110 °F | |
Northstar Polymers MPP-R02C Semi-rigid Polyurethane Foam Formulation MPP-R02C is semi-rigid foam formulations for molded foam products. It is closed-cell light foam with some structural integrity. Unlike rigid polyurethane foams, the physical properties of a cured pr.. |
|||
Mold Temperature | 38.0 - 82.0 °C | 100 - 180 °F | |
Ineos Nova 2590 General Purpose Crystal Polystyrene
(discontinued **) Good blending resin, Good balance of flow, strength and heat resistance, USP Class VIApplications: Consumer electronics, Housewares, Co-extrusion cap coat, Impact resin cuttingExposure to gamma radi.. |
|||
Mold Temperature | 38.0 - 79.0 °C | 100 - 174 °F | |
Samsung Cheil Industries Starex® SD-0150 ABS, Unreinforced
(discontinued **) Amorphous Acrylonitrile Butadiene Styrene (ABS)Characteristics: General Purpose: Good Impact Strength, Chemical Resistance, ProcessabilityApplications: Household Appliances, Auto Interior Trim and P.. |
|||
Mold Temperature | 37.8 - 93.3 °C | 100 - 200 °F | |
PolyOne Edgetek® AS-20GF/000 HI UV NAT Acrylonitrile Butadiene Styrene (ABS), Glass Filled
(discontinued **)& Description/Features:Glass Fiber ReinforcedHigh ImpactUV StabilizedNaturalUL 94 HBPolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
Mold Temperature | 38.0 - 82.0 °C | 100 - 180 °F | |
Ineos Nova 1290 High Heat Crystal Polystyrene Good processing characteristics, Low residual monomer, Low oligomersApplications: Direct injection foam, Biaxially oriented sheet, Glazing sheetExposure to gamma radiation in the 2.02-6.06 megarad r.. |
|||
Mold Temperature | 38.0 - 82.0 °C | 100 - 180 °F | |
Ineos Nova 5404 High Impact Polystyrene High impact, Good environmental stress crack resistance, USP Class VIApplications: Thermoformed containers and lids, Hot and cold beverage cups, Custom sheet, Single service packagingProperties were.. |
|||
Mold Temperature | 37.8 °C | 100 °F | |
Multibase Multi-Flex® D 6505 TPO Thermoplastic Polyolefin Elastomer Features: Chemical Resistance, Good PaintableOzone ResistantDensity, LowTear Strength, GoodUV Resistance, Good Forms:PelletsProcessing Method:Injection Molding Uses: Automotive ApplicationsInform.. |
|||
Mold Temperature | 38.0 - 66.0 °C | 100 - 151 °F | |
Eastman Tritan MX710 Copolyester Eastman Tritan Copolyester MX710 is an amorphous product with excellent appearance and clarity. Eastman Tritan Copolyester MX710 has many outstanding features that include excellent toughness, hydr.. |
|||
Mold Temperature | 37.8 - 65.6 °C | 100 - 150 °F | |
Ecomass® 705ZG91 Stainless Steel/Tungsten Filled ABS High Specific GravityStainless Steel/Tungsten Powder Filled ABSInformation provided by Technical Polymers |
|||
Mold Temperature | 37.8 - 65.6 °C | 100 - 150 °F | |
Clariant Renol TPU1088A Polyurethane Elastomer, Aromatic Polyester Data provided by Clariant Masterbatches |
|||
Mold Temperature | 38.0 - 82.0 °C | 100 - 180 °F | |
Ineos Nova 6100 Super High Impact Polystyrene
(discontinued **) Good balance of gloss and impact, High glossApplications: Thermoformed and molded packaging, Drink cups and lids, Structural foam, Custom sheetProperties were determined on injection molded specimen.. |
|||
Mold Temperature | 38.0 - 82.0 °C | 100 - 180 °F | |
Ineos Nova 5190 High Impact Polystyrene
(discontinued **) Good balance of toughness and rigidity, Superior gloss, USP Class VIApplications: Refrigeration, Appliances, High gloss applicationsProperties were determined on injection molded specimens at 23°C .. |
|||
Mold Temperature | 38.0 - 79.0 °C | 100 - 174 °F | |
Samsung Cheil Industries Starex® HF-5661H ASA, Unreinforced
(discontinued **) Amorphous Styrene Acrylonitrile (SAN)Characteristics: High Flow: Impact, Heat and Chemical Resistance and Surface GlossApplications: Pens, TV Components, Refrigerator and Appliance ComponentsProcess.. |