- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyolefin
- Multibase Multi-Flex® D 6505 TPO Thermoplastic Polyolefin Elastomer
Multibase Multi-Flex® D 6505 TPO Thermoplastic Polyolefin Elastomer
| Category | Polymer , Thermoplastic , Elastomer, TPE , Polyolefin |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® D 6505 TPO Thermoplastic Polyolefin Elastomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Features: Chemical Resistance, Good PaintableOzone ResistantDensity, LowTear Strength, GoodUV Resistance, Good Forms:PelletsProcessing Method:Injection Molding Uses: Automotive ApplicationsInformation provided by Multibase
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.952 g/cc | 0.952 g/cc | ASTM 792 |
| Linear Mold Shrinkage | 0.013 cm/cm | 0.013 in/in | ASTM D955 |
| Melt Flow | 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C |
5.0 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 60 | 60 | 10 seconds; ASTM D2240 |
| Tensile Strength, Yield | 20.7 MPa | 3000 psi | Elastic; ASTM D412 |
| Elongation at Break | 150 % | 150 % | Elastic; ASTM D412 |
| Flexural Modulus | 0.965 GPa | 140 ksi | ASTM D790 |
| Tear Strength | 78.9 kN/m | 450 pli | ASTM D624 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 177 - 199 °C | 350 - 390 °F | |
| Middle Barrel Temperature | 199 - 221 °C | 390 - 430 °F | |
| Front Barrel Temperature | 221 - 232 °C | 430 - 450 °F | |
| Nozzle Temperature | 6.11 - 232 °C | 43.0 - 450 °F | |
| Melt Temperature | 232 °C | 450 °F | |
| Mold Temperature | 37.8 °C | 100 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Clamp Tonnage | 2-4 tons/in2 | |
| Screw L/D Ratio | 20:1 |
Users viewing this material also viewed the following:
- Polymax® Maxelast® P3760 TPE, PP Overmold or Standalone use
- S&E Specialty Polymers GR-1409 PVC
- 2065D Polyurethane-based Biomedical Elastomer
- Fujipoly Industries Sarcon® 45GSR Thin-Film GSR
- Hexcel® HexPly® 916 120°C Curing Epoxy Matrix
- ChevronTexaco Superla® 7 White Oil
- Cast Nylons Nycast® 6MPB Plasticized Nylon 6
- Toyobo Diaflora® DS 2220B
- H.C. Starck Amperit® 552.072 Tungsten Carbide - Chromium Carbide-Nickel 73-20-7 (WC-CrC-Ni)
Copyright © lookpolymers.com All Rights Reserved